Sky Viper V950STR Instruction Manual | Page 5

Sky Viper Quadcopters Instruction Manual - V950STR.
Download
Page  of 12
4.7, 1448 votes
background image

IMPORTANT: YOU ONLY HAVE A FEW 

SECONDS AFTER THE LIPO BATTERY IS 

PLUGGED IN TO PLACE DRONE ON A 

LEVEL SURFACE FOR PROPER CALIBRA-

TION. IF DRONE DOES NOT RISE TO A 

STABLE HOVER OR FLIES ERRATICALLY, 

REPEAT STEPS 1 THROUGH 6.

CAUTION: NEVER APPROACH DRONE 

WHILE THE PROPELLER BLADES ARE 

STILL SPINNING. THROTTLE DOWN UNTIL 

THE BLADES STOP THEN TURN OFF 

REMOTE BEFORE ATTEMPTING TO 

HANDLE DRONE. 

FLIGHT SENSITIVITY ADJUSTMENT

CALIBRATING LAUNCHING

1

4

6

Drone responsiveness may be adjusted on the 

Controller to match your flying skills. 

There are three choices:
1. BEGINNER – 2. INTERMEDIATE – 3. ADVANCED
It is best to start in 

BEGINNER MODE 1 until you 

have mastered flying. Flight sensitivity can be adjusted 

before or during flight.

IMPORTANT: Advanced Mode 3 is a 

performance flight setting for OUTDOOR USE 

ONLY.  Blade guards and camera module 

MUST BE REMOVED for proper flight opera-

tion in Mode 3. 

1 - BEGINNER

2 - INTERMEDIATE

3 - ADVANCED

1  Turn OFF Remote Control.  
2  Disconnect the LiPo battery connectors hanging 

out from the back of the drone. 

 

Pull connectors, not wires.

3  Reconnect battery connectors.
4  Quickly place Drone on FLAT LEVEL 

SURFACE.

5  Turn Remote Control ON.
6  Slowly push remote control THROTTLE 

STICK 

UP until Drone lifts into the air.

t  When launching the Drone, face the same direction as the Drone. Green blades should be in front. 
t  Practice launching, hovering and landing before attempting to learn other moves. 
t  Flying 2 to 3 feet above the ground will reduce ground turbulence and make flying easier. 
t  When first attempting to fly in different directions, start by tapping the Direction stick until you have a 

feel for it. Always move the controls slowly until you become comfortable operating the drone. 

t  Once you’ve mastered flying in directions, practice Rotational controls. Spinning and keeping Drone 

facing the same direction you are facing makes flying easier and more intuitive.

t  Stay 2 to 3 feet away from walls and ceilings as Drone will be drawn towards them if you fly too 

close. 

t  If propeller blades come in contact with another object or you crash, throttle down immediately to 

prevent possible or further damage.

t  If anything prevents Drone’s blades from spinning or they become jammed, THROTTLE DOWN 

IMMEDIATELY. Do not attempt to fly until obstruction has been removed and damage fixed.

t  Should something prevent Drone’s blades from spinning, Drone may AUTO SHUTDOWN. LiPo 

battery will need to be unplugged then reconnected to restore flying power.

t  If the Drone flies too far away, beyond the control range of the remote, the Drone will 

AUTO-LAND to prevent the Drone from flying away out of control.

FLYING TIPS

t  Drone drifts forward 

– Press the 

B button 

t  Drone drifts backward 

– Press the 

F button

t  Drone drifts to the left 

– Press the 

R button 

t  Drone drifts to the right 

– Press the 

L button

t  Drone spins counter-clockwise, 

when viewed from the top 

– Press the        

button

t  Drone spins clockwise, when 

viewed from the top 

– Press the        

button

If Drone drifts in any direction while hovering (and you are not pressing the Direction stick), 

you may need to make trim adjustments. Safely land Drone on a level surface. Press the 

recommended Trim button once as described below. Launch the Drone back into the air and 

attempt another still hover. If Drone continues to drift, repeat the process until a still 

hover is achieved:

TRIM ADJUSTMENTS

NOTE: THE REMOTE WILL BEEP/FLASH 3 TIMES WHEN TRIM ADJUSTMENT 

IS SET TO THE NEUTRAL POSITION (THE MIDDLE OF THE TRIM RANGE) AND 

BEEP ONCE WHEN IT HAS REACHED THE END OF IT’S RANGE.  

REMOVING & REATTACHING 
CAMERA MODULE

The Camera Module is easily removed to improve flight 
performance.  Simply unplug the camera connector and slide the 
camera module forward to disconnect from drone. To reconnect, 
simply clip camera module back onto drone and plug in the wire 
connector.

7

4

2

SIZE: 297 x 210mm (folds to 148.5 x 210mm)

PAGE 7 / PAGE 4

3A

 

0.632414s