Sharp Sharp 2.0 Sound Bar System HT-SB30 User's Manual

Sharp Speaker System User's Manual - Sharp 2.0 Sound Bar System HT-SB30.
Download
Page  of 2
4.6, 1781 votes
background image

ENGLISH

MODEL

HT-SB20

HT-SB30

SOUND BAR HOME THEATER SYSTEM

OPERATION MANUAL

Printed in Malaysia
13A R AS 

1

Note: This product is recommended for fl at panel TV (LED, LCD and plasma).

TINSZB425AWZZ

MUTE

ON/

STAND-B

Y

MUSIC

CINEMA

NEWS

SURROUND

BYPASS

INPUT

TV

CH

VOL

VOL

RRMC

GA322

AWSA

SOUND MO

DE

(HT-SB30 only)
The Bluetooth® word mark and logos are registered trademarks owned by 
Bluetooth SIG, Inc. and any use of such marks by SHARP is under license. Other 
trademarks and trade names are those of their respective owners.

*TINSZB425AWZZ2-*|

Caution: Before operating this product, refer “IMPORTANT SAFEGUARDS AND 

WARRANTY” at the reverse page of English operation manual.

E-1

Accessories

The following accessories are included.

MUTE

ON/

STAN

D-BY

MUSIC

CINEMA

NEWS

SURR

OUND

BYPAS

S

INPUT

TV

CH

VOL

VOL

RRM

CGA

322A

WS

A

SOUN

D MO

DE

Remote control x 1

(RRMCGA326AWSA: HT-SB20)
(RRMCGA322AWSA: HT-SB30)

AC/DC adaptor x 1

(RADPAA096AWZZ)

AC power cord x 1

(QACCDA005AWZZ)

Audio cable x 1

(QCNWGA087AWPZ)

Pattern paper x 1

(TCAUHA034AWZZ)

The illustrations printed in this manual are for the model HT-SB30.

Controls and indicators

On/Stand-by

Indicator

On/Stand-by

Button

Input Button

Pairing Button

Pairing Indicator

Surround Indicator

Surround Button

Volume Down 

Button

Volume Up Button

1.

2.

3.

4.

5.

6.

7.

8.

9.

Remote Sensor

Left Channel 

Speakers

Right Channel 

Speakers

10.

11.

12.

Front Panel (HT-SB30)

On/Stand-by

Indicator

On/Stand-by

Button

Surround Button

Surround Indicator

Volume Indicator

Volume Down 

Button

1.

2.

3.

4.

5.

6.

Volume Up Button

Remote Sensor

Left Channel 

Speakers

Right Channel 

Speakers

7.

8.

9.

10.

Front Panel (HT-SB20)

SOUND BAR HOME THEATER SYSTEM HT-SB30

SOUND BAR HOME THEATER SYSTEM HT-SB30

11

12

2

1

3 4 5

7

6

8 9 10

SOUND BAR HOME THEATER SYSTEM HT-SB20

SOUND BAR HOME THEATER SYSTEM HT-SB20

9

10

2

1

3 4

5 6

7 8

E-2

Controls and indicators (continued)

TV Operation Buttons (Only SHARP TV):
On/Stand-
by Button

Sets the TV power to 
“ON” or “STAND-BY”.

Input Select 
Button (TV)

Press the button to 
switch the input source.

Volume Up 
and Down 
Buttons

VOL

Turn up/down the TV 
volume.

Channel Up and 
Down Buttons

CH

Switch up/down the TV 
channels.

Note:

●  Some models of SHARP TV may not be operable.

 ● 

SHARP TV remote control will not work with HT-SB20/HT-SB30 system.

Note:
Before using remote control, please remove plastic 
shield at battery holder.

Remote Control

Remote Control Transmitter

Mute Button

Cinema (Sound Mode) button

Music (Sound Mode) button

Surround Button

Bypass (Sound Mode) button

TV Operation Buttons

Bluetooth Pairing Button (HT-SB30 only) 

Bluetooth Play/Pause Button (HT-SB30 

only)

Bluetooth Skip Up Button (HT-SB30 only) 

Bluetooth Skip Down Button (HT-SB30 

only)

On/Stand-by Button 

News (Sound Mode) button

Input Button (HT-SB30 only)

Volume Up/Down Buttons 

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

MUTE

ON/

STAND-BY

MUSIC

CINEMA

NEWS

SURROUND

BYPASS

INPUT

TV

CH

VOL

VOL

RRMCGA322AWSA

SOUND MODE

10

12

13

14

15

2

7

8
9

11

1

5

3
4

6

Remote control

Plastic shield

Battery holder

DC In Jack 

Audio In Jack 

1.

2.

Rear Panel

1

2

E-3

To mount the sound bar on the wall

Caution:

Be very careful to prevent the sound bar [5.07 lbs. 

(2.3 kg)] from falling when mounting on the wall.

Before mounting, check the wall strength. (Do not 

put on the veneer plaster or whitewashed wall. The 

sound bar may fall.) If unsure, consult a qualifi ed 

service technician.

Mounting screws are not supplied. Use appropri-

ate ones.

Check all wall mount angle screws for looseness.

Select a good location. If not, accidents may occur 

or the sound bar may get damaged.

SHARP is not responsible for accidents result-

ing from improper installation.

Driving screws

SHARP designed the sound bar so you may hang 

it on the wall. Use proper screws (not supplied). 
See below for size and type.

1/8” (3.2 mm)

3/8” (9 mm)

Min. 7/8” (22 mm)

3/16”
(5 mm)

Installing the sound bar

Fix the pattern paper to the wall in hori-

zontal position as below.

44 mm

509 mm

Wal  
surface

Pattern paper 
(supplied)

548 mm

1

Make a hole on the wall following the screw 

point marks on the pattern paper by using 

a drill.

Wall surface

1-1/4” (32 mm)

3/8” (8-9 mm)

2

Fix a wall mount plug into the hole using 

a hammer, until it is fl ush with the wall 

surface.

1-1/4” (32 mm)

3/8” (8-9 mm)

Wall surface

3

Fasten the screws to the wall as shown below.
(Total screw is 2 pieces)

Screw using

Wall surface

Wall surface

Screwdriver

4.5mm - 5mm

Gap from 

wall surface

4

Hang the sound bar onto the screws.

5

System preparation

E-4

Placing the sound bar

Installation image:

Place the 

sound

bar as 

shown.

Notes:

Remove the protective fi lm covering the sound 

bar before turning on the system.

The front panel of the sound bar is not 

removable.

Caution:

Do not change the installation direction when 

the sound bar is turned on. 

Do not stand or sit on the sound bar as you 

may be injured.

TV

VCR

DVD player

Falling prevention

Safety wires (not supplied) are useful to prevent the sound bar from falling. 

E-5

When placing on the shelf/table

Rack/

table

Screw eye

(not supplied)

Safety

wires

(not

supplied)

Screw eye

(not supplied)

Sound bar

When mounting on the wall

SOUND BAR HOME THEATER SYSTEM HT-SB30 

Safety wires (not

supplied)

Sound bar

Screw eye (not supplied)

Wal

E-6

Sound bar connections to TVs

Caution:
Turn off all other equipment before making any connections.
Notes:

● To connect to TV, use Audio IN terminals located at the rear of the sound bar.

● Refer the operation manual of the equipment to be connected.

● Fully insert the plugs to avoid fuzzy pictures or noises.

● In some cases, a small background noise could emit from the sound bar, when you 

use the RCA audio output terminal connection from a TV-Set/DVD/Blu-ray Disc 

Player. In such case, please change the connection to the headphone terminal 

connection. This effect depends on the used TV/DVD/Blu-ray Disc Player-Brand, 

model and age, and it is not a quality matter from the sound bar.

● If the TV volume is continuously at low level, the sound bar will automatically 

power off. Increase the TV output volume to enjoy the sound from the speaker.

Connecting a TV, or DVD player, etc.

If the TV/monitor has an audio output, connect it to the Audio IN jack on the rear 
of the sound bar.

HT-SB30

To select AUDIO IN function:
Press INPUT button repeatedly.
To select Bluetooth function:
Press INPUT button repeatedly. (PAIRING indicator turns blue.)

Audio cable

(not supplied)

To AUDIO 

IN jack

Audio signal

To HEADPHONE

terminal

To audio output terminals

TV

or

Blu-Ray/DVD player/

Digital Tuner

Sound bar

Audio cable

E-7

AC power connection

After checking all the connections have 
been made correctly, connect the AC 
power cord to the AC power input jack, 
then to the AC outlet.

Using with the AC/DC adaptor

1 Plug the AC power cord into the AC/

DC adaptor.

2 Plug the AC/DC adaptor cable into 

the DC INPUT jack on the sound 
bar.

3 Plug the AC power cord into an AC 

outlet.

Notes:

During power standby, the stand-by 
indicator turns RED. If ON-STANDBY 
button is pressed, the STAND-BY 
indicator turns BLUE.
Unplug the AC/DC adaptor from the 
AC outlet if the sound bar will not be 
used for a prolonged period of time.
Use only the supplied AC/DC adaptor. 
Using other AC/DC adaptor may 
cause an electric shock or fi re.

Make sure to unplug the AC power 
cord before making any connections.

2

1

AC/DC Adaptor 

Cable

DC IN jack

(DC 17V)

AC power cord

AC/DC Adaptor

(AC 100 - 240 V ~ 50/60 Hz)

AC outlet

E-12

Listening to Bluetooth enabled devices (for HT-SB30) (continued)

Listening to the sound

Check that:

The source device Bluetooth functionality is ON.
Pairing of this sound bar and the source device 
is completed.
Any device connected to the AUDIO IN socket 
is turned off.

Press the ON/STAND-BY button to turn the 

power on.

1

Press the INPUT button to select Bluetooth

function.

2

Start the Bluetooth connection from the 

Bluetooth stereo audio source device.

3

Start playing on the Bluetooth stereo audio 

source device.
Notes:

If the source device has an extra bass function 

or equalizer function, set them to off. If these 

functions are on, sound may be distorted.

4

Notes:

You need to make the Bluetooth connection 

again if:

- the sound bar is not turned on.

- the source device is not turned on, or its Blue-

tooth functionality is off or is in sleep mode.

If both the Bluetooth connected device and the 

one connected to the AUDIO IN are played 

simultaneously, only the Bluetooth sound can 
be heard.


To fi nish listening

Perform any of the followings.
- Terminate the Bluetooth connection on the audio 

source device.

  Refer the operating manual supplied with the 

device.

- Turn off the Bluetooth stereo audio source 

device.

- Turn off this sound bar.
Note:
The volume of this sound bar may not be controlled 
as intended depending on the device.

Bluetooth operation buttons
(remote control only)

Press the button to play or pause.

Press the button to skip up.

Press the button to skip down.

E-13

Troubleshooting chart

Bluetooth sound 

is interrupted or 

distorted.

(HT-SB30)

Is the sound bar 

too near to a device 

that generates 

electromagnetic  

radiation?

Is there any obstacle 

between the sound 

bar and the Bluetooth

stereo audio source 

device?

Remote control

Symptom

Possible cause

The remote control 

does not operate 

properly.

Is the battery polarity 

correct?

Is the battery dead?

Is the distance or angle 

incorrect?

Are there any 

obstructions in front of 

the sound bar?

Is there a  strong light 

shining on the remote 

sensor?

Is the remote control 

for another equipment 

used simultaneously?

The sound bar 

cannot be turned 

on with the remote 

control.

Is the AC power cord 

of the sound bar 

plugged in?

Is the battery inserted?

TV cannot be 

operated with the 

remote control.

Depending on the 

model, some or all 

functions may not be 

operable using the 

remote control of this 

sound bar. In this case, 

use the remote control 

supplied with the TV.

Many potential problems can be resolved by the 

owner without calling a service technician.

If something is wrong with this product, check the 

following before calling your authorized SHARP 

dealer or service center.

General

Symptom

Possible cause

No sound is heard.

Is the input signal 

(selection) set 

properly?

Is the volume level set 

to minimum?

Is muting activated?

Are the connections 

made correctly?

Is the sound bar too 

far from the Bluetooth

stereo audio source 

device? (HT-SB30)

Is the sound bar paired 

with the Bluetooth

stereo audio source 

device? (HT-SB30)

Noise is heard 

during playback.

Move the sound 

bar away from any 

computers or mobile 

phones.

When a button 

is pressed, the 

sound bar does not 

respond.

Set this sound bar to 

the stand-by mode and 

then turn it back on.

If the sound bar still 

malfunctions, reset it.

(Refer to page 7.)

The power is not 

turned on.

Is the sound bar 

unplugged? (Refer to 

page 10)

The protection circuit 

may be activated. 

Unplug and plug in the 

power cord again after 

5 minutes or more.

E-14

Troubleshooting chart

Error indicators and 

warnings

When you fail to perform operations properly, the fol-
lowing messages are displayed on the sound bar.

Display

Meaning

Power indica-

tor (blinks red)

When the protection circuit 

is activated.

(*): Should the same message appear even if 

the sound bar is unplugged and plugged in 

or is set to the stand-by mode and on again, 

contact your local dealer where you purchased 

the sound bar.

Condensation

Sudden temperature changes, storage or operation 

in an extremely humid environment may cause con-

densation inside the cabinet or on the transmitter 

on the remote control.

Condensation can cause the sound bar to malfunc-

tion. If this happens, leave the power on until normal 

operation is possible (about 1 hour). Wipe off any 

condensation on the transmitter with a soft cloth 

before operating the sound bar.

Factory reset, clearing all 

setting

Make sure to disconnect all audio input cables 

attached to the sound bar before performing the 

factory reset.
1.  Unplug the AC power cord.
2.

HT-SB20

Press and hold ON/STAND-BY button 

and the SURROUND button and plug the 

AC power cord.

HT-SB30

Press and hold ON/STAND-BY button 

and the PAIRING button and plug the AC 

power cord.

3.  Press the ON/STAND-BY button
Caution:

This operation will erase all data stored in 

memory.

If problem occurs during 

operation

When this product is subject to strong external 

interference (mechanical shock, excessive static 

electricity, abnormal supply voltage due to light-

ning, etc.) or if it is operated incorrectly, it may 

malfunction.
If such a problem occurs, do the following:

Set the sound bar to the stand-by mode and 

turn the power on again.
If the sound bar is not restored in the previous 

operation, unplug and plug in the sound bar, 

and then turn the power on.

1

2

E-15

Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth.
Caution:

Do not use chemicals for cleaning (petrol, paint 

thinner, etc.). It may damage the cabinet fi nish.

Do not apply oil to the inside of each component. 

It may cause malfunctions.

SURROUND

-

+

SOUND BAR HOME THEATER SYSTEM HT-SB30

ON/STAND-BY SOURCE

PAIRING

VOLUME

Maintenance

As part of our policy of continuous improvement, 

SHARP reserves the right to make design and 

specification changes for product improve-

ment without prior notice. The performance 

specification figures indicated are nominal 

values of production unit. There may be some 

deviations from these values in individual unit.

General

Power source DC IN 17V 

 2.8A: AC/DC 

adaptor

(AC 100 - 240V ~ 50/60Hz)

Power 

consumption

10W

Maximum 

output power

RMS: Total 40 Watts

20 Watts per channel into 

6 ohms at 1 kHz, 10% total 

harmonic distortion

FTC: Minimum 14 watts 

per channel into 3 ohms at 

100 Hz to

20 kHz, 1% total harmonic 

distortion

Speaker

2-way Speaker System

2-1/4” (5.7cm) Woofer

1” (2.5cm) Soft Dome

Input 

terminals

Analog input (AUDIO IN): 

Stereo mini jack Ø 3.5mm

500mV / 47kohms

Frequency 

Band 

(HT-SB30)

2.4 GHz band (2,400GHz 

- 2,480GHz)

Compatible 

Bluetooth

Profi le 

(HT-SB30)

A2DP (Advanced Audio 

Distribution Profi le), AVRCP 

(Audio/Video Remote Control 

Profi le)

Bluetooth 2.1 +EDR

Dimensions

Width: 37” (940mm)

Height: 2-7/8” (73mm)

Depth: 3-1/4” (83mm)

Weight

5.07lbs. (2.3kg)

Specifi cations

E-8

Remote control

Battery installation

Precautions for battery use:

Remove the battery if the sound bar will 

not be used for a long period of time. 

This will prevent potential damage due 

to battery leakage.
Caution:

Do not use rechargeable battery 

(nickel-cadmium battery, etc.).

Danger of explosion if battery is in-

correctly replaced.

Replace only with the same or 

equivalent type.

Batteries (battery pack or batteries 

installed) shall not be exposed to ex-

cessive heat such as sunshine, fi re 

or the like.

Installing the battery incorrectly may 

cause the sound bar to malfunction.

Notes concerning use:

Replace the battery if the operating 

distance is reduced or if the opera-

tion becomes erratic. Purchase “CR 

2025”, coin lithium battery. 

Periodically clean the transmitter on 

the remote control and the sensor 

on the sound bar with a soft cloth.

Exposing the sensor on the sound 

bar to strong light may interfere with 

operation. Change the lighting or the 

direction of the sound bar if this oc-

curs.

Keep the remote control away from 

moisture, heat, shock, and vibra-

tions.

This product contains a CR Coin 

Lithium Battery which contains Per-

chlorate Material – special handling 

may apply, California residents, see

www.dtsc.ca.gov/hazardouswaste/per-

chlorate/

While pushing the locking tab to-

wards the center of the remote con-

trol, slide out the battery holder.

Locking

tab

Back of 

remote control

Remove the old battery from the 

battery holder, insert the new bat-

tery and then slide the battery hold-

er back into the remote control.

Battery type

Battery holder

Locking tab

Polarity
(+) symbol

Positive (+) 

side up

1

2

E-9

General control

To turn the power on

Press the ON/STAND-BY button.

The STAND-BY indicator turns BLUE.
Note:

If the power does not turn on, check whether 

the power cord is plugged in properly.
To set the sound bar to stand-by mode:

Press the ON/STAND-BY button again. The 

STAND-BY indicator turns RED.

Volume auto fade-in

If you turn off and on the sound bar again, 

volume will start at lower level and gradually 

increase to the last set level.

Volume control

Sound bar operation:

Press volume up (VOLUME + ) to increase 

the volume and press volume down (VOL-

UME – ) to decrease the volume.
Remote control operation:

Press the VOL + button to increase the 

volume and the VOL – button to decrease 

the volume.
Note:
When volume is maximum or minimum:

HT-SB20

The VOLUME indicator: blinking

HT-SB30

The SURROUND indicator: blinking

Muting

The volume is muted temporarily when pressing 

the MUTE button on the remote control. Press 

again to restore the volume.

Surround

When the SURROUND button is pressed, the 

SURROUND sound is ON. (SURROUND indicator 

turns ORANGE)

Sound Mode

Remote control operation:

Press the desired sound mode button 

on the remote control.

HT-SB20

The VOLUME indicator: blinking

HT-SB30

The SURROUND indicator: blinking

CINEMA (for cinema sound effect)
MUSIC

(for standard sound effect)

NEWS

(for news)

BYPASS (for fl at sound effect)    

Function

HT-SB20

When the sound bar is connected to the TV/

DVD, etc., the AUDIO IN function is ready 
to be used.

HT-SB30

When the INPUT button is pressed, the input 

source will change. 
1  Audio In Function - the pairing indicator turns 

off.

Bluetooth Function - the pairing indicator 

turns blue.

Note:

The backup function will protect the memorized 

function mode for a few hours should there be 

a power failure or the AC power cord becomes 

disconnected.
Auto power on function:

When stand-by indicator is VIOLET, the sound 

bar will automatically power ON if it detects 

audio signal from connected equipment, 

unless it is turned off manually (STAND-BY 

indicator turns red).

Auto power off and auto detect signal:

The sound bar will automatically go to stand-

by mode (STAND-BY indicator turns violet) if 

no audio signal is detected within 20 minutes.

E-10

Listening to Bluetooth enabled devices (for HT-SB30)

About Bluetooth technology

Bluetooth wireless technology is a short-range radio 
technology that enables wireless communication 
between various types of digital devices, such 
as mobile phone or computer. It operates within 
a range of about 10 meters (30 feet) without the 
hassle of having to use cables to connect these 
devices. Since the Bluetooth technology does not 
require line of sight between the communicating 
devices, it is not necessary to line up the transmit-
ting device and the receiver, as in the case of infra 
red technology.
Communication System and Bluetooth Profi le 
of this sound bar
There are many available Bluetooth Profiles 
describing the basic communication methods, 
specifi c functions and uses, to enable communica-
tion between devices.
This sound bar supports the following:
Communication System: Bluetooth Specifi cation 
version 2.1 Bluetooth + Enhanced Data Rate 
(EDR) Profi le : A2DP (Advanced Audio Distribu-
tion Profi le)
A2DP enables audio streaming from an A2DP 
equipped Bluetooth stereo audio source device 
(eg mobile phone) to this sound bar. By convert-
ing wireless stereo audio signal to analogue audio 
signal, you can enjoy listening to the sound through 
this speaker system.
AVRCP (Audio/Video Remote Control Profi le) is a 
technology that allows a single remote control to 
control all Bluetooth enabled Audio Video equip-
ment to which a user has access.
Notes when using unit with a mobile phone

This unit cannot be used to talk over the tele-
phone even when there is a Bluetooth con-
nection made to a mobile phone.
Please refer to the operating manual supplied 
with the mobile phone for details on operation 
of your mobile phone while transmitting the 
sound using a Bluetooth connection.

SURROUND

-

+

SOUND BAR HOME THEATER SYSTEM HT-SB30

ON/STAND-BY SOURCE

PAIRING

VOLUME

Audio stream

Bluetooth mobile phone or other 

Bluetooth Stereo audio source device

Pairing Bluetooth devices

Bluetooth devices need to be initially paired fi rst 
before they can exchange data. Once paired, it is 
not necessary to pair them again unless:

pairing is made with more than 8 devices.
Pairing can only be made one device at 
a time. This sound bar can be paired to a 
maximum of 8 devices. If subsequent device 
is paired, the oldest device paired, will be de-
leted and replaced with the new one.
this sound bar is reset. All pairing information 
is deleted when sound bar is reset.
pairing information is deleted while repairing, etc.

On indicators

Status

PAIRING indicator (blue)

Unconnected

Blinks

Pairing mode

Blinks quickly

Connected

Lights up

E-11

Listening to Bluetooth enabled devices (for HT-SB30) (continued)

SURROUND

-

+

SOUND BAR HOME THEATER SYSTEM HT-SB30

ON/STAND-BY SOURCE

PAIRING

VOLUME

ON/STAND-BY

PAIRING

Pairing with other Bluetooth
source device

Press the ON/STAND-BY button to turn the 
power on.

1

Press the INPUT button to select Bluetooth
function. (PAIRING indicator blinks.)

2

Press and hold the PAIRING button for 1 
second or more.
PAIRING indicator blinks quickly. The sound 
bar is now in pairing mode and is ready to be 
paired with other Bluetooth source device.
Note:
Pairing indicator (blue) will stop blinking once 
the sound bar is successfully paired with the 
source device.

3

Perform pairing procedure on the source 
device to detect this sound bar. (Refer 
the source device operating manual for 
details).
“SHARP HT-SB30” will appear in the detected 
devices list (if available) in the source device.
Notes:
● Place the devices to be paired within 1 me-

ter (3 feet) of each other when pairing.

● Some source devices are unable to display 

lists of detected devices. To pair this sound 
bar with the source device, refer to the 
source device operating manual for details.

4

Select “SHARP HT-SB30” from the source 
list. If Passcode* is required, enter “0000”.
Pairing indicator (blue) on the sound bar will 
stop blinking once the sound bar is success-
fully paired with the source device. Pairing
information is now memorized in the sound 
bar.
* Passcode may be called PIN Code, Passkey, 
PIN number or Password.

5

Start the Bluetooth connection from the 
source device.
Some audio source devices may connect with 
the sound bar automatically, otherwise follow 
the instructions in the source device operating 
manual to start connection.

6

Notes:

If this sound bar or the source device is turned 
off before Bluetooth connection is completed, 
pairing will not be completed and the pairing 
information will not be memorized. Repeat 
step 1 onwards to start pairing again.
To pair with other devices, repeat steps 1 - 5 
for each device.
This sound bar can be paired to a maximum 
of 8 devices. If subsequent device is paired, 
the oldest device paired, will be deleted and 
replaced with the new one.
Once a device is ousted or deleted from 
the pairing list, the pairing information for 
the device is also deleted. To listen to the 
sound from the device again, it needs to be 
re-paired. Perform steps 1 - 5 to pair the de-
vice again.
Passcode of this sound bar is fi xed to “0000” 
and can only be paired with Bluetooth source 
device whose passcode is also “0000”.

HT-SB30_EN_SPECIAL_NOTES_A2.indd1   1

HT-SB30_EN_SPECIAL_NOTES_A2.indd1   1

2013-01-07   06:55:01

2013-01-07   06:55:01

Related Manuals for Sharp Sharp 2.0 Sound Bar System HT-SB30

0.688168s