Sharp DLDR6BD14WWE Installation Manual

Sharp LED Lighting Installation Manual - DLDR6BD14WWE.
Download
Page  of 8
4.4, 1866 votes
background image

1

E

3.  Let the socket hang 

freely. See Figure B.

Recessed Ceiling Fixture Capability
This Sharp 6" round luminaire can be installed in select re-

cessed 6" round ceiling fixtures.  
Warning: Risk of Electric Shock – Use only compatible 

recessed fixtures that are listed on the specification sheets 

available for download at www.sharpledlighting.com. All 

listed compatible recessed fixtures should be installed per the 

manufacturer’s installation instructions and should be in strict 

conformance with local building and electrical codes.

TYPICAL RECESSED 
CEILING FIXTURE

SOCKET
MOUNTING
BRACKET

SOCKET

Figure a

Unpack the product and remove all packing material. This 

product comprises of two assemblies, the luminaire and the 

socket adaptor.

InstallatIon
1.  Turn power off.
2.  Remove lamp and reflector from the ceiling fixture for 

retrofit if applicable. Detach the socket from the socket 

mounting bracket and remove mounting bracket.

4. Attach socket adaptor 

into socket.  

See Figure C. 

5.  Connect the other end of the 

socket adaptor to the connector on 

top of the luminaire. A positive lock 

will secure the two connectors.  

See Figure D. 

 DO NOT SUSPEND LUMINAIRE 

FROM SOCKET ADAPTOR.

                                              

6.  Compress the two 

torsion springs together, 

release them so that each 

one seats into the side 

brackets located in the 

sidewall of the ceiling 

fixture. See Figure E.

7.  Tuck the wiring and connector back into the ceiling fixture.
8.  Carefully push the luminaire 

up into the ceiling fixture until 

flush with the ceiling. See 

Figure F.

9.  Restore power to ensure 

operation.

CautIon – safety statements

  Qualified licensed professionals should perform all 

installation work. Installation must be completed in strict 

conformance with local building and electrical codes.

  Do not dis-assemble the luminaire. 
  Do not remove or attempt to operate without lens cover 

over LED.

  Do not handle energized luminaires.
  Warning – Do not expose wiring to edges of metal to 

prevent damage.

  Warning – For removal of luminaire, turn off power. Allow 

luminaire to cool before handling. Reverse process of 

installation for removal.

SOCKET
ADAPTOR

Figure C

POSITIVE LOCK 
CONNECTORS

Figure D

Figure B

Figure F

Figure e

TYPICAL SIDE BRACKET IN 
RECESSED CEILING FIXTURE

COMPRESS 
TO INSTALL

ENGAGE 
TORSION 
SPRINGS 
INTO SIDE 
BRACKETS

TORSION 
SPRINGS

6" rounD Down Light instaLLation instruCtions

0.608232s