Sharp Connecting_a_Sharp_Projector_to_a_Network Quick Start Manual

Sharp Projectors Quick Start Manual - Connecting_a_Sharp_Projector_to_a_Network.
Download
Page  of 2
4.4, 2314 votes
background image

How to Connect a Sharp Projector to a Network

Quick Reference Guide

Applicable Models:

XG-V10WU

XG-V10XU

B.) Set IP Address

XG-V10WM

XG-V10XM

NOTE:  IP Address is Static - verify with

Quick Reference Guide Sections:

            IT / MIS Department.

1.)  AN-L10T Installation
2.) Projector Configuration
3.) S.A.P.S. Configuration

1.) Install Lan Card into expansion slot 
on A/V connector side of the projector

Refer to Operation Manual - page 5

C.) Set Gateway

Refer to O/M page numbers 2 - 3 for details

There are (4) four items to configure 
on the projector menu. 

A.) Set ID Number

Refer to Operation Manual - page 6

B.) Set IP Address
C.) Set Gateway
D.) Set Subnet Mask

A.) Set ID Number

D.) Set Subnet Mask

Refer to Operation Manual - page 7

Refer to Operation Manual - page 4

2.) Configure Projector Menu 

Must be 

obtained from

 IT / MIS 

Department

L:\tekcentr\cactrain\qck_ref.xls

1

3:18 PM

10/12/2001

0.467355s