Shark Shark Professional Fabric Steamer - GS300 User's Manual | Page 8

Shark Garment Care User's Manual - Shark Professional Fabric Steamer - GS300.
Download
Page  of 24
4.4, 1025 votes
background image

8

TOLL FREE: 1-800-798-7398

fig. 6

PUSH

 

STEAM BONNET

1  The steam bonnet protects  

fabrics from water marks and 
filters impurities from tap water. 
Attach the left side of the bonnet 
over the nozzle and stretch the 
bonnet across the nozzle securing 
the right side of the bonnet. 
(

fig. 7)

2  To remove the bonnet, pull the 

purple tab from the edge of the 
bonnet and pull off. 

 

IMPORTANT: The bonnet should 
be in place at all times.

 

WARNING: The bonnet should 
never be removed during use or 
until the unit has cooled.

 

FILLING THE WATER TANK

1  Make sure the power switch is 

OFF “0” then unplug the unit from 
the power outlet. 

2  Unscrew the water cap from 

the inlet, the cap is tethered to 
the water tank and can not be 
completely removed. (

fig. 6

3  Using a cup fill the water tank to 

the max fill line. 

4  Replace the cap on the fil ing 

inlet. Push the cap down and turn 
clockwise to lock making sure the 
arrows align. 

 IMPORTANT: 

The water cap must 

be locked into place securely to 
al ow proper flow of water. Once 
turned on, steam will not emit if 
the water cap is not secure.

 

WARNING: Do not fill the water 
tank when the unit is plugged in to 
an electrical outlet. 

 

WARNING: The steam is hot! Be 
careful not to touch the steam 
nozzle when the unit is turned on 
or has been in use.

fig. 8

fig. 7

USING YOUR ACCESSORIES

ASSEMBLY- cont.

 

BRISTLE FRAME 

1  The bristle brush frame provides 

deep steam penetration for heavy 
weight fabrics (denim, canvas, 
cotton, etc.). It should be attached 
over the steam bonnet. 

2  The bristles of the frame should 

be on top of the steam nozzle. 
Attach the two tabs on the bottom 
of the frame to the nozzle, then 
lock into place using the upper 
tab. (

fig. 8)

Related Manuals for Shark Shark Professional Fabric Steamer - GS300

0.628268s