Sanyo PID-42AS1 User's Manual | Page 3

Sanyo Car Video System User's Manual - PID-42AS1.
Download
Page  of 22
4.2, 2391 votes
background image

3

CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but 
improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this monitor observe the 
following basic rules for its installation, use and servicing .

Installation and Use

Do not allow anything to rest on the power 
cord . Do not locate this LCD monitor where the 
cord will be damaged by people walking on it.

Do not overload wall outlets and extension 
cords as this can result in fire or electric shock.
A suitable socket outlet must be provided near 
to the monitor and shall be easily accessible .
Do not place this LCD monitor near any heat 

sources such as radiators, heaters, stoves and other heat-generating 
products (including amplifiers). 
Do not place your LCD monitor on an unstable stand, shelf or table . 
Serious injury to an individual, and damage to the LCD monitor may 
result if it should fall . Your sales person can recommend an approved 
wall mounting kit. A special wall mounting kit is available for this 
model .

This LCD monitor should be operated only from the type of power 
source indicated on the monitor or as indicated in the Operating In-
structions . If you are not sure of the type of power supply, consult your 
sales person or your local power company .

For added protection it is strongly recommended that this LCD 
monitor has its mains supplied via an approved earth fault protection 
device .

WARNING: To prevent injury the LCD monitor must be securely 
attached to the wall in accordance with the manufacturers installation 
instructions .

IMPORTANT:
This product must be earthed.
This unit is not disconnected from the mains unless the mains lead is 
unplugged. The installer must make sure that the mains plug is easily 
accessible .

Do not use immediately after moving the LCD monitor from a low 
temperature to a high temperature environment, as this causes con-
densation, which may result in fire, electric shock, or other hazards. 
Before cleaning, unplug the monitor from the wall socket. 

Do not mount near an open flame source. Open flames must never 
be used near this LCD monitor .
This LCD monitor should not be built in or enclosed in any way, heat 
build up will reduce the life of the monitor .

This LCD monitor should have a minimum distance of 5cm away from 
the wall and the monitor should have 10cm distance around the top 
and sides .
Always mount using recommended and substantial fixtures and fit-
tings .

10cm

10cm

10cm

5cm

Do not cover the ventilation slot on the LCD monitor . Heat build-up 
can reduce the service life of your LCD monitor, and can also be 
dangerous .

Do not apply liquid cleaners or aerosol cleaners directly onto the LCD 
monitor . Use a damp cloth for cleaning .

ADDITIONAL FOR NORTH AMERICA AND CANADA:
This
 monitor must NOT be permanently mounted to the building 
structure . It must be mounted in such a way that it can be removed 
using basic tools .
The power supply cord must NOT be attached to the building surface . 
The power supply cord must NOT be routed through walls, ceiling, 
floors, or other similar openings in the building structure. 
The power supply cord MUST be positioned so as to prevent physical 
damage .

Important: (UK only)

THIS PRODUCT MUST BE EARTHED.
This equipment is fitted with an approved mains lead and an 
approved non rewireable UK mains plug . To change a fuse in this 
type of plug proceed as follows:
1. Remove the fuse cover and fuse .
2.  Fit a new fuse which should be a BS1362 13 Amp A .S .T .A . or 

BSI approved type .

3. Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must NOT be used 
but replaced with a serviceable plug .
If the fitted plug is not suitable for your socket outlets, it should be 
cut off and an appropriate plug fitted in its place. If the mains plug 
contains a fuse, this should have a rating of 13 Amp, ensure the 
fuse cover is correctly fitted. If a plug without a fuse is used, the 
fuse at the distribution board should not be greater than 13 Amp .
Note: The severed plug must be destroyed to avoid a possible 
shock hazard should it be inserted into a 13 Amp socket else-
where .

The wires in this mains lead are coloured in accordance with the 
following code:
 

Blue 

Neutral

 

Brown 

Live

 

Green and Yellow 

Earth

1.  The Blue wire must be connected to the terminal which is 

marked with the letter “N” or coloured BLACK.

2.  The Brown wire must be connected to the terminal with the 

letter “L” or coloured RED.

3.  The Green and Yellow wire must be connected to the terminal 

which is marked with the letter “E” or coloured GREEN or 
GREEN and YELLOW .

Before replacing the plug cover, make certain that the cord grip is 
clamped over the sheath of the lead - not simply over the wires .
Do not attempt to bypass the safety purpose of the grounding 
type plug .
THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UN-
LESS THE MAINS LEAD IS UNPLUGGED.
THE INSTALLER MUST MAKE SURE THE MAINS LEAD IS 
EASILY ACCESSIBLE.

SAFETY PRECAUTIONS

GB

GB

Related Manuals for Sanyo PID-42AS1

0.497584s