Sanyo MPX-MD162 User's Manual | Page 3

Sanyo Network Card User's Manual - MPX-MD162.
Download
Page  of 55
4.7, 1420 votes
background image

CONTENTS

PARTS NAMES  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

FRONT PANEL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
REAR PANEL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

CONNECTION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

BASIC CONNECTIONS  . . . . . . . . . . . . . . . . . . . . . .5
CONNECTIONS TO THE ALARM IN AND
RS232C/RS485 TERMINALS  . . . . . . . . . . . . . . . . . .6
REMOTE CONTROLLER CIRCUIT
CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

BASIC OPERATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . .8

MODE SWITCHING . . . . . . . . . . . . . . . . . . . . . . . . . .8
SECURITY LOCK FUNCTION  . . . . . . . . . . . . . . . . .9
SETTINGS BACKUP FUNCTION  . . . . . . . . . . . . . . .9
RESET FUNCTION  . . . . . . . . . . . . . . . . . . . . . . . . . .9

LIVE PICTURE MODE  . . . . . . . . . . . . . . . . . . . . . . . . . .10

FULL SCREEN OPERATIONS  . . . . . . . . . . . . . . . .12
4 DIVISIONS SPLIT SCREEN OPERATIONS  . . . .14
MULTI-DISPLAY SCREEN OPERATIONS  . . . . . .15
PLUS-DISPLAY SCREEN OPERATIONS  . . . . . . .15

MONITOR 2 OPERATIONS  . . . . . . . . . . . . . . . . . . . . . .17
VCR PLAYBACK MODE  . . . . . . . . . . . . . . . . . . . . . . . .18

FULL SCREEN OPERATIONS  . . . . . . . . . . . . . . . .20
4 DIVISIONS SPLIT SCREEN OPERATIONS  . . . .22
MULTI-DISPLAY SCREEN OPERATIONS  . . . . . .23
PLUS-DISPLAY SCREEN OPERATIONS  . . . . . . .23

MENU SETTING MODE . . . . . . . . . . . . . . . . . . . . . . . . .25

LANGUAGE SETTING  . . . . . . . . . . . . . . . . . . . . . .26
CLOCK AND DAYLIGHT SAVING SETTING . . . . .27
VCR SETTING AND EXTERNAL CONTROL
COMMUNICATION SPEED SETTING  . . . . . . . . . .29
ALARM AND SENSOR SETTING . . . . . . . . . . . . . .31
ACTIVE RECORDING AND VIDEO LOSS
SETTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
MONITOR SETTINGS  . . . . . . . . . . . . . . . . . . . . . . .35
CAMERA SETTING . . . . . . . . . . . . . . . . . . . . . . . . .36
SETTING EACH CAMERA DISPLAY POSITION
IN SPLIT SCREEN DISPLAY MODE  . . . . . . . . . . . .43
CLOCK AND TITLE DISPLAY SETTINGS  . . . . . . .44
ALARM DATA DISPLAY . . . . . . . . . . . . . . . . . . . . .45

ALARMS OPERATIONS  . . . . . . . . . . . . . . . . . . . . . . . .46
INTERFACE SPECIFICATIONS  . . . . . . . . . . . . . . . . . .48
SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

FEATURES

Using this unit you can display the live pictures from the
cameras in split screen display mode (16, 9 or 4 divisions) while
recording, and the recorded pictures can also be displayed in
split screen display mode.

• High-speed switching (up to single field switching)
• 1, 4, 9, 16 screens display modes, with possibility of

displaying an automatic sequential live or recorded pictures
display in the bottom right 1/4 of the screen while in 9 or 16
split screen display mode.

• Full screen display on monitor 2 and during alarms automatic

switching to the alarm screen.

• The following operations are possible at each camera

according to the timer settings:

• Programmed recording of certain or all cameras only can be

done according to the day or night periods.

• Different alarm durations of certain or all cameras can be set

according to the day or night periods.

• Live or recorded pictures of certain or all cameras can be

masked so they are not visible according to the day or night
periods.

• Automatic switching delay can be set for each camera

according to the day or night periods.

• Video sensor points areas can be set for each camera.

Trigger can start alarm recording operations in priority.

• If the video signal is interrupted at any of the cameras, the

frozen image just previous to the interruption or color bars
can be displayed (selectable for each camera).

• The unit can be controlled by computer through the RS232C

connection.

• A system controller (sold separately) can be used through the

RS485 (RJ-11) connection.

• 2 monitors output and S-VIDEO input/output (MPX-CD162

model only).

• Up to 100 alarm entries can be displayed on-screen.

ACCESSORIES

Power cord x1

Fixer
Power cord tie x1

To mount this unit onto a rack, please use the rack mount
hardware sold separately.

L8FC5/US (MPX-CD162, MD162 GB) 2000. 8. 31

2

English