Sanyo MPX-CD162 User's Manual | Page 9
BASIC OPERATIONS
MODE SWITCHING
When the unit is connected to a power source, the default display mode will be as follows: live picture displayed in a 16
divisions split screen on monitor 1, and sequentially, full screen on monitor 2. You can use the VCR, MENU and LIVE buttons
to switch to the desired mode on monitor 1 (see below for further information). When the power is restored after having
already used the unit, the unit will restart in the modes selected before the unit was turned off.
LIVE picture mode
VCR playback mode
LIVE picture mode
Menu mode
When the power on
Live Picture Mode (see page 10)
When the LIVE button is pressed, the live (direct) picture from
the cameras connected to the camera input terminals (1 – 16)
on the unit rear panel, will be displayed on monitor 1. While in
live picture mode you can use the still and zoom functions.
NOTE:
• The unit will automatically start in the live picture or VCR
playback display mode (16, 9, 4 divisions split screen, full
screen or sequential display) last selected. Therefore, when a
mode is selected, the display mode will remain the same.
• If a camera is not connected at one of the input terminals,
“NO VIDEO” will be displayed on the monitor 1 screen.
VCR Playback Mode (see page 18)
Start playback on the VCR. If the video signal is correctly
recorded, the VCR playback image will be displayed on monitor
1 when the VCR button is pressed. While in VCR playback
mode you can use the still and zoom functions.
NOTE: If playing back a tape not recorded through this unit,
“NO ID” will be displayed on the monitor screen.
NOTE: In live picture mode and VCR playback mode
there may be a slight vertical roll of the picture.
Menu Mode (see page 25)
Press the MENU button to display the menu. The buttons used
for menu control are indicated below.
Menu control buttons
1 j, l, c, d buttons...press repeatedly
• j button: will move the cursor up.
• l button: will move the cursor down.
• c button: will move the cursor towards the right.
• d button: will move the cursor towards the left.
2 +, – buttons...press repeatedly
• + button: for forward selection of numbers, letters,
symbols.
• – button: for backward selection of numbers, letters,
symbols.
3 NEXT button
To select a sub-menu (in the (CAMERA SET), (POSITION SET),
(DISPLAY SET) menus) in order to set the title position, etc.
Press the NEXT button to switch between the menu and the
sub-menu.
4 EXIT/DISPLAY button (see page 9)
To exit the menu mode and return to live picture mode.
Also, when in live picture mode or VCR playback mode, press
this button to switch the display of the camera title and the clock
display on/off.
VCR
(LANGUAGE/LANG./IDIO.)
ENGLISH
FRANCAIS
ESPANOL
MENU
LIVE
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
NO VIDEO
NO ID
MULTI
LIVE
VCR
MENU
ZOOM
STILL
SEQUENCE
NEXT
EXIT
DISPLAY
ALL
RESET
MENU
RESET
2
1
3
4
L8FC5/US (MPX-CD162, MD162 GB) 2000. 8. 31
8
English
Related Manuals for Sanyo MPX-CD162
-
ADTRAN Network Card Total Access 5000 Command Reference Manual
1200 pages
-
Toshiba Network Card TOSVERT VF-S9 User's Manual
17 pages
-
TP-Link Network Card AV200 User's Manual
2 pages
-
TP-Link Network Card AV600 User's Manual
2 pages
-
Bose Network Card 802c User's Manual
20 pages
-
Trane Network Card CH530 User's Manual
36 pages
-
Honeywell Network Card Modutrol IV Motors Series 90 User's Manual
12 pages
-
Delta Electronics Network Card AC Drive VFD-F Series User's Manual
161 pages
-
Delta Electronics Network Card Programmable Logic Controller DVP28SV User's Manual
2 pages
-
ADTRAN Network Card NetVanta 818 User's Manual
2 pages
-
ADTRAN Network Card NetVanta 838 User's Manual
2 pages
-
ADTRAN Network Card OPTI-6100 User's Manual
2 pages
-
ADTRAN Network Card Total Access 5000 User's Manual
2 pages
-
Siemens Network Card 6RA70 User's Manual
232 pages
-
M-Audio Network Card FireWire 410 User's Manual
30 pages
-
Alcatel-Lucent Network Card OmniVista 4760 User's Manual
11 pages
-
Datalogic Scanning Network Card Connection Box CBX100 User's Manual
2 pages
-
Tyco Network Card Software House RM-DCM-CAN User's Manual
2 pages
-
Tyco Network Card Software House RM-DCM-2 User's Manual
2 pages
-
MegaVision Network Card Network Management System User's Manual
62 pages
-
JDS Uniphase Network Card T-BERD 8000 User's Manual
2 pages
-
TP-Link Network Card TL-PA4010 User Guide
29 pages
-
LSI Network Card SAS3081E User's Manual
46 pages
-
LSI Network Card SAS3442E User's Manual
46 pages