Sanyo LNS-S31 User's Manual

Sanyo Camera Lens User's Manual - LNS-S31.
Download
Page  of 4
4.2, 2288 votes
background image

Following checks and confirmations should be taken for safety.

Check the following things by the time of the cabinet assembly after the lens

replacement.

1. Check the lens is securely fixed.

2. Check the proper wiring and the wires are fixed properly.

3. Check each connector is connected properly.

4. Check no wiring is tangled on the gear of lens motor or the other mechanical parts.

5. Check no parts is missing, or no mounting part is loose.

LCD PROJECTOR LENS
MODEL LNS-S30/S31

LENS REPLACEMENT PROCEDURE

NOTES ON LENS REPLACEMENT

Lens replacement should be performed by the qualified service personnel.

It should be followed by this procedure precisely.

Before attempt to replace the lens, confirm the model number (both the LCD

projector and the lens) and use the proper lens.

The lens cover is on the lens for protection. Be sure to remove the lens cover

before installation.

When installing or removing the lens, be careful not to stain, scratch or

damage the lens.

If you have any questions, contact the dealers.

Following parts are contained in the packing.

1AA6P1P3245-- (IDEJ)

PARTS LIST

● LENS
● DRIVER (3 mm, Green) 
● DRIVER (4 mm, Yellow)
● LIGHT-BLOCK SHEET    For LNS-S30

For LNS-S31

1 piece 

1 piece (Part No. 610 287 7328)

1 piece (Part No. 610 275 6029)

1 piece Type PA1 (Part No. 610 285 3735)

1 piece Type PE1 (Part No. 610 293 9804)

0.523008s