Sanyo Home Security System MPX-MD4 User's Manual | Page 8
BASIC OPERATIONS
MODE SWITCHING
When the unit is connected to a power source, the default display mode will be as follows: live picture from the four cameras
will be displayed in a 4 divisions split screen on monitor 1, and sequentially, full screen on monitor 2. You can use the VCR,
LIVE and MENU buttons to switch to the desired mode (see below for further information).
LIVE picture mode
VCR playback mode
LIVE picture mode
Menu mode
When the power on
Live Picture Mode
When the LIVE button is pressed, the live (direct) picture from
the cameras connected to the camera input terminals (1 – 4) on
the unit rear panel, will be displayed. While in live picture mode
you can use the still and zoom functions (see page 9).
NOTE:
• The unit will automatically start in the live picture or VCR
playback display mode (4 divisions split screen, full screen or
sequential display) last selected. Therefore, when a mode is
selected, the display mode will remain the same.
• If a camera is not connected at one of the input terminals,
“NO VIDEO” will be displayed on the monitor screen.
VCR Playback Mode
Start playback on the VCR. If the video signal is correctly
recorded, the VCR playback image will be displayed on monitor
1 when the VCR button is pressed. While in VCR playback
mode you can use the still and zoom functions (see page 15).
NOTE: If playing back a tape not recorded through this unit,
“NO ID” will be displayed on the monitor screen.
Menu Mode
Press the MENU button to display the menu. The buttons used
for menu control (see page 21) are indicated below.
Menu control buttons
1 c, l (VCR, LIVE) button
Use these buttons to move the cursor to the right or down.
• c button: will move the cursor towards the right.
• l button: will move the cursor down.
2 +, – (QUAD, SEQUENCE) buttons
Use these buttons to select numbers, letters, symbols.
• + button: for forward selection
• – button: for backward selection
3 NEXT (ZOOM) button
To select a sub-menu in order to set the title position, etc. Press
the NEXT button to switch between the menu and the sub-menu.
4 EXIT (STILL) button
To exit the menu mode.
5 SHIFT (MON2) button
Use this button and the c or l buttons to move the cursor to
the left or up.
• Press and hold the SHIFT button, then press the c
button to move the cursor to the left.
• Press and hold the SHIFT button, then press the l
button to move the cursor up.
VCR
(LANGUAGE/LANG./IDIO.)
ENGLISH
FRANCAIS
ESPANOL
MENU
LIVE
NO VIDEO
NO ID
MON 2
STILL
ZOOM
SHIFT
EXIT
NEXT
SEQUENCE
QUAD
LIVE
VCR
MENU
MENU RESET
ALL RESET
5
4
3
2
1
L8FH5/US (MPX-CD4 GB) 1999. 6. 4
English
7
Related Manuals for Sanyo Home Security System MPX-MD4
-
GE Home Security System 45129 User's Manual
20 pages
-
Bosch Home Security System Bosch Appliances Home Security System DS7400XI User's Manual
100 pages
-
Bosch Home Security System D7412GV3 User's Manual
76 pages
-
Bosch Home Security System ICP-CC488 User's Manual
118 pages
-
GE Home Security System CC-SCRS01 User's Manual
2 pages
-
GE Home Security System General Electric Home Security System FTP-1000 User's Manual
12 pages
-
GE Home Security System General Electric Home Security System NX-116E User's Manual
20 pages
-
GE Home Security System General Electric Home Security System NX-124E User's Manual
20 pages
-
Honeywell Home Security System Galaxy 16 Plus User's Manual
30 pages
-
Samsung Home Security System 720p Hdtv Camera SDC8340BU User's Manual
2 pages
-
Samsung Home Security System 8 Channel Hdtv Hybrid Dvr SDR4200 User's Manual
26 pages
-
Creative Home Security System WIRELESS RECEIVER SB1122 User's Manual
29 pages
-
Radio Shack Home Security System Wireless Key-Lock Door/Window Alarm 49-118 User's Manual
1 pages
-
La Crosse Technology Home Security System WT-5120 User's Manual
15 pages
-
Magellan Home Security System MG-PMD75 User's Manual
2 pages
-
Firstech, LLC. Home Security System COMPUSTAR CM3000 User's Manual
8 pages
-
Linear Home Security System DXT-41 User's Manual
1 pages
-
Pelco Home Security System ENDURA WS5000 User's Manual
8 pages
-
Pelco Home Security System Pelco Home Security System CM9700-CC1 User's Manual
1 pages
-
APC Home Security System NetBotz NBRK0570 User's Manual
152 pages
-
Total Commander Home Security System COMMANDER 2000 User's Manual
61 pages
-
SkyLink Home Security System HA-300 User's Manual
2 pages
-
Enviro Home Security System EA800 User's Manual
98 pages
-
INSTEON Home Security System 2842-222 User's Manual
4 pages