Download Sanyo HF-710 User's Manual for Free | Page 7

Download Freezer User's Manual of Sanyo HF-710 for free from ManualAgent.
Electrical Requirement
Make sure there is a suitable power outlet (115 volts, 15 amps
outlet) with proper grounding to power the freezer.
Avoid the use of three plug adapters or cutting off the third grounding
in order to accommodate a two plug outlet. This is a dangerous
practice since it provides no effective grounding for the freezer and
may result in shock hazard.
Use of Extension Cord
Avoid the use of an extension cord because of potential safety
hazards under certain conditions. If it is necessary to use an extension
cord, use only a 3-wire extension cord that has a 3-blade grounding
plug and a 3-slot outlet that will accept the plug. The marked rating of
the extension cord must be equal to or greater than the electrical
rating of the appliance.
Install Limitations
Do not install your freezer in any location not properly insulated or
heated e.g. garage etc. Your freezer was not designed to operate in
temperature settings below 55˚ Fahrenheit or above 90˚ Fahrenheit.
Select a suitable location for the freezer on a hard even
surface away from direct sunlight or heat source e.g. radiators,
baseboard heaters, cooking appliances etc. Any floor unevenness should
be corrected.
( 4.2, 39 Votes )
Page  of 14

Related Manuals for Sanyo HF-710