Sanyo ECD-T1550 User's Manual | Page 9

Sanyo CD Player User's Manual - ECD-T1550.
Download
Page  of 16
4.1, 1230 votes
background image

SET THE CLOCK
Press the DSP button (15), the clock is
shown on the LCD display. Then hold down
the button until the clock flashes. Then
press the MANU/SKIP   button (17) to
change hours or MANU/SKIP   button (16)
to change minutes.

MUTE
Press MUT button (2) to mute down the
sound instantly. If any button (except
button (4)) is pressed in the mute state, the
mute mode is released.

EQUALIZATION
Press EQ button (24) to turn on equalization
function and to select desired audio mode.
There are five kinds of mode as below:

LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display (8).

AUXILIARY INPUT
The unit can be connected to a portable
audio player through the AUX IN jack (7).
Note : The face plate will not close when
something is plugged in the AUX in jack.

REMOTE SENSOR
Point the remote control handset to the
remote sensor IR (23). Press the function
keys on the handset to control the system.

RESET FUNCTION
RESET
 button (12) can be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:

- Initial installation of the unit when 

all wiring is completed.

- All the function buttons do not 

operate.

- Error symbol on the display.

9

OPERATION

SWITCHING ON/OFF THE UNIT 

When the hidden panel turns up (in State
2), switch the unit on by pressing any
button (except      button (4)). When system
is on, press   (9) to turn the unit off.

SOUND ADJUSTMENT
Press SEL button (10) to select the 

desired adjustment mode.

The adjustment mode will change in 

the following order:

By pressing VOLUME + button (11) or
VOLUME- button (27), it is possible to
adjust the desired sound quality.

BEEP ADJUSTMENT
Press SEL button (10) and hold for more
than 2 seconds until “BEEP“ appears on
display.

Press VOLUME+ button (11) or
VOLUME- button (27) as follows:

BEEP 2ND       BEEP ALL       BEEP OFF

-  BEEP 2ND mode:

The beep is only generated when all 
allowed double function button is 
pressed long (several seconds). e.g.
When preset button is pressed.
When BND/LOU button (13) is 
pressed.
When AMS button (18) is pressed.

-  BEEP ALL mode:

The beep is generated when every 
button is pressed.

-  BEEP OFF mode:

The beep is disabled.

VOL

BAS

TRE

BAL

FAD

(Volume)

(Bass)

(Treble)

(Balance)

(Fader)

FLAT

CLASSICS

POP M

ROCK M

DSP OFF

0.497842s