Sanyo DC-MX31 User's Manual | Page 7

Sanyo Stereo System User's Manual - DC-MX31.
Download
Page  of 17
4.3, 1024 votes
background image

 

6

SETTING UP AND CONNECTING THE UNIT 

 
Replacing battery of the remote control 
1. 

Squeeze the notched tab A while pulling the battery door latch B 
out to take the battery holder out. 

2. 

Insert a “CR2025” 3V lithium battery. Make sure the polarity (the 
+ and – side of the battery) is correct. 

3. 

Replace the battery holder back in the remote control.   

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Speaker connection   
To insert the speaker cable, push down the terminal lever of the RIGHT 
Speaker Terminal and LEFT Speaker Terminal. 
Please ensure the cables are connected into the speaker terminals with the 
correct polarities. Connect the Left Speaker to the Left Speaker Terminals, 
with red wire to the L+ and black wire to the L-. 
Connect the Right Speaker to Right Speaker Terminals, with red wire to the 
R+ and black wire to the R-. 
 
Headphone connection 
You can use headphones to listen in privacy. Insert the headphones 3.5mm plug into Phone Socket. 
Use corresponding adaptors if you have different plugs, the speaker will cut off automatically when 
the headphones are being used. 
Note: Excessive sound pressure from earphones and headphones can cause hearing loss. 
 
Mains connection 
This unit was designed to operate at an AC 230 - 240V 50 Hz house current. 
Connecting this system to any other power supply could result in damage to the unit, which is not 
covered by your warranty. If this plug is not fit for your outlet, you should change your outlet by a 
qualified licensed electrician. 

BATTERY PRECAUTIONS 

Follow these precautions when using battery in this device..   
1. 

Danger of explosion if battery is incorrectly replaced, use only the size and type of 
battery specified. 

2. 

Battery shall not be exposed to excessive heat such as sunshine, fire or the like. 

3. 

Be sure to follow the correct polarity when installing the battery as indicated in the 
battery compartment. Reversed polarity may cause damage to the device. 

4. 

If the device is not to be used for a long period of time, remove the battery to prevent 
damage or injury from possible battery leakage. 

5. 

Do not try to recharge battery, it is not intended to be recharged and doing so may 
cause the battery to rupture or leak. 

6. 

Do not dispose of batteries in general waste, contact your local Council regarding 
available recycling or disposal options. 

red 

black 

0.502667s