Sanyo 710-00792-1 User's Manual | Page 3

Sanyo Projection TV User's Manual - 710-00792-1.
Download
Page  of 8
4.9, 2268 votes
background image

ASSEMBLE BOTTOM CABINET

Remove the 4 Joint Bolts on the Bottom Cabinet.
Keep these bolts for later use.  They are necessary
for joint the Top and Bottom Cabinets.
Remove the 2 Cover Plates on the top of the
Bottom Cabinet.  Keep the Cover Plates for later
use.  Replace those plates, when the appliance
needs to be transported.

Install the Center Panel to the Bottom Cabinet.  Be
sure to meet the Center Panel and the Bottom
Cabinet at the upper part first, and insert the 6 legs
of Center Panel to the holes of the Bottom Cabinet.
Be sure to set the Center Panel securely. 

Remove Joint Bolts and Cover Plates

Install Center Panel

1

2

Cover Plates
(2 pcs)

Joint Bolts (4 pcs)

Center Panel
Meet the Center Panel and the Bottom
Cabinet at the upper part first and
push in the Panel securely.

Leg

Hole

There are the 5 Protection Pads inside of the
Bottom Cabinet for protection against shock or
vibration.  Remove the 4 Pads supporting at the
upper side of the Bottom Cabinet first.  And then,
remove the pad(A) supporting at the lower side of
the projector.  When removing the pad(A), pull
downward first and remove the pad.  

Remove Protection Pads

3

CAUTION

WHEN REMOVING THE PROTECTION
PADS, BE CAREFUL NOT TO BROKE THE
WIRING INSIDE OF THE BOTTOM
CABINET.
BE SURE TO REMOVE ALL THE
PROTECTION PADS INSIDE OF THE
CABINET.  AND BE CAREFUL NOT TO
LEAVE ANY PAD OR FRAGMENT IN THE
CABINET.  IT MAY RESULT IN FIRE
HAZARDS.

Joint Bolts
(4 pcs)

Protection Pads (5 pcs)

The back side of 
the Bottom Cabinet.

Pad(A)
Pull the pad(A) to
downward first and
remove the pad.

Projector

0.539938s