Rinnai ES38 (RHFE-1004FTA) Specification Sheet

Rinnai Vent Wall Furnaces Specification Sheet - ES38 (RHFE-1004FTA).
Download
Page  of 2
4.2, 2420 votes
background image

Starts and turns off the heater at two timer settings 

provides precise gas flow by operating from one to seven stages 

detects temperature change in 1/2 of a degree 

monitors and controls combustion fan and allows the appliance to 
overcome winds of up to 40 mph  

reduces noise through use of swept blades in convection fan; and 
through the design of the combustion chamber and heat exchanger 
which silently expand or contract due to temperature changes  

continually monitors functions; provides auto shutdown codes; indicates 
when air filter needs cleaning 

Timer Settngs: 

Seven-stage modulating gas valve: 

Negative coefficient thermistor:   

Variable speed inducer motor with 
pressure switch: 

Quiet operation: 

 
 
Self diagnostic electronics:   

ES38 (RHFE-1004FTA) 

Type of Appliance 
 
 

Rinnai Model Number 

Gas Rate Input (BTU/hour) 
 

Gas Rate Output (BTU/hour) 
 

AFUE Rating 

Minimum Gas Supply Pressure 

Maximum Gas Supply Pressure 

Electrical Connection 

Gas Connection 

Combustion System 

Ignition System 

Temperature Settings 

 
 
Temperature Control 

 

Humidifier Tray 

Weight 

Clearance from Combustibles 

 
Noise Level 

Warm Air Outlet 

Direct vent wall furnace suitable for homes, apartments, and 
condominiums; modular/mobile home approved; forced combustion, 
forced convection 

RHFE-1004FTA-N (Natural gas) 

RHFE-1004FTA-P (Propane) 

Low - 10,500 

Low - 10,500 

 

 

High - 38,400 

High - 36,500 

Low - 8,400 

Low - 8,400 

High - 30,720 

High - 29,200 

80.6% 82.0% 

5 in (127 mm) W.C. 

11 in (279 mm) W.C. 

10.5 in (267 mm) W.C  

13 in (330 mm) W.C. 

AC 120V, 60 Hz, 121 watts 

1/2 inch FNPT 

Stainless steel inshot burners 

Direct spark 

Low (LO): minimum combustion 
60° - 80° F in 2° increments  
High (HI): maximum combustion 

•  Electronic thermostat 

•  Temperature limiting program to comply with Inside Design 

Temperature limits 

Enameled tray with capacity of 6.3 pints (3 liters) 

Approximately 90 lbs (41 kg) 

Side: 2 inches (50 mm) 

Top: 10 inches (250 mm) 

Front: 40 inches (1 m) 

37 - 47 dB(A) 

Bottom front louvers 

© 2011 Rinnai Corporation 

RHFE-1004FTA-SP                       6/2011 

FEATURES 

0.575960s