RCA RT2770 Owner's Manual | Page 2

RCA Audio Owner's Manual - RT2770.
Download
Page  of 2
4.9, 1463 votes
background image

Automatic Preset Programming

1. Press  AM/FM to enter the AM/FM mode.

2. Press and hold  AM/FM for two seconds to

start automatic preset programming.

3. Radio frequencies will be browsed and radio

stations stored automatically. When all the

available radio stations are stored or all 40

(30 preset stations for FM and 10 preset

stations for AM) memory locations are full,

the auto preset programming function 

will stop.

Manual Preset

1. Tune to a radio station (see “Manual tuning”

for details).

2. Press  MEMORY . While the Program Preset

number is still flashing, input your desired

preset number using the numeric buttons or

press  CH+/- , then press  MEMORY

to store it.

Retrieving Preset Stations

1. Press  AM/FM to enter the Tuner mode.

2. Press  CH +/-  to search up or down for the

preset stations or directly press the 

numeric buttons.

USB Mode
This unit allows you to connect your own USB

storage devices such as mp3 players and USB

flash memory. Connect the USB device first

then you can start playback.

Connecting/Disconnecting USB Device to 

the Main Unit

Insert the USB device's port into the USB jack of

the unit. Unplug the device to disconnect.

USB Device Playback Features 

(Only support MP3/WMA file)

1. Press  USB on front panel or remote control

to select USB mode.

2. Press 

to start playback or press 

to

pause playback.

3. Press 

to end playback.

4. Press  CH+/-  on the remote control or 

/

on the front panel to skip to the previous or

next file.

5. Press  REPEAT on the remote control to select

repeat mode. (REPEAT ONE, REPEAT FOLDER,

REPEAT ALL, REPEAT OFF)

6. Press  RANDOM on the remote control to

select random play mode. (RANDOM ON,

RANDOM OFF)

7. Press  INTRO on the remote control to turn

on/off intro mode. The unit will play the first

ten seconds of each track on the USB device.

8. Press  DISPLAY on the remote control to

select among mp3/WMA ID3 information,

elapsed time,current play Folder and Track

number and Play Mode. 

Line in Mode
1. Connects one end of the 3.5mm stereo cable

to the line in connector on the front panel of

the unit and the other to the line out or

headphone jack on an external source.

2. Press LINE-IN on the front panel or the

remote control to select line in mode.

Safety Precautions
•  Never open the cabinet under any 

circumstances.  Any repairs or internal 

adjustments should be made only by a 

trained technician.

•  Never operate this product with the 

cabinet removed.

•  Do not touch the player with wet hands. If 

any liquid enters the player cabinet, take the

player to a trained technician for inspection.

•  The apparatus shall not be exposed to 

dripping and splashing.

• No object filled with liquids, such as vases, 

shall be placed on the apparatus.

• No naked flame sources such as lighted

candles, shall be placed on the apparatus.

Amplifier Section
RMS Output Power: Dolby Digital Mode with

10% Total Harmonic Distortion

Front, Rear and Center Channels: 

167 Watts per Channel (1KHz, 8 Ohm)

Subwoofer Channel: 167 Watts (100Hz, 8 Ohm)

Total RMS Output Power, 

Dolby Digital mode : 1000 W

FTC Output Power: Dolby Digital Mode with

10% Total Harmonic Distortion

Front Channels (L and R ): 75 Watts per channel

(1KHz, 8 Ohm)

Rear Channels (L and R): 75 Watts per channel

(1KHz, 8 Ohm)

Center Channel: 155 Watts  (1KHz, 8 Ohm)

Subwoofer Channel: 155 Watts  (80Hz, 8 Ohm)

Total FTC Output Power, 

Dolby Digital mode: 610 Watts

Muting Attenuation: 65dB

Frequency Response: 200Hz/-3dB, 1kHz ref.

Subwoofer Frequency Response: 

10 Hz / -3db, 80Hz ref.

Signal to Noise Ratio: 65dB 

(Dolby digital mode)

AM Tuner Section
Frequency Response: 2kHz +/-6dB, 1kHz ref.

Usable Sensitivity: 800uV/m @ S/N 20dB

Signal to Noise: 38dB

IF Rejection: 35dB

FM Tuner Section
Frequency Response: 15kHz +/-3dB, 1kHz ref.

Quieting:  24dBu

Signal to Noise: 60dB(stereo) / 65dB(mono)

IF Rejection: 50dB

Dimensions (H x W x D mm) 
Unit:  430 x 140 x 347

Front and Surround Speakers: 143 x 80.5 x 93.7

 Center Speaker: 80.5 x 271 x 72

Subwoofer: 355 x 195 x 325

Unit/AM/FM Operation 
ST indicator is off.

•  Adjust the antenna.

•  Press  MONO/ST button to insure 

you are not outputting in mono.

The signal is Mono. Severe hum or noise.

•  The signal is too weak. Connect an 

external antenna.

•  Adjust antenna.

•  Reposition antenna away from 

any electronics.

There is interference to FM reception.

•  Turn off other electrical units (e.g. DVD, CD 

player) near the unit.

Remote Control Operation 
The remote control does not operate 

the unit.

•  No batteries installed. (included with your 

system) Install the batteries before 

attempting to operate the remote. Be sure to 

match the + and - ends of each battery to 

the symbols shown in the remote battery 

compartment.

•  The batteries are weak. Replace all batteries.

•  The remote is not pointed at the remote 

control sensor on the main unit or there is an 

obstacle between the remote and the 

main unit.

•  The remote control is too far from the 

main unit, move closer.

General 
No audio.

•  Make sure the speakers are connected.

•  Check the input connections.

•  Check the power cord connections.

• Make sure MUTE is off.

•  Make sure the digital setting (optical, coaxial 

or analog) is correct. 

•  Check that the headphone is not inserted.

No audio from one channel.

•  Check the speaker level setting.

•  Check the speaker wire or external source 

cable connections. 

Noise occurs when the TV is turned on.

•  The TV is too close to the audio system. 

Sound Enhancement Systems
This unit is equipped with several built-in

sound enhancement systems.

Dolby Digital 

The Dolby Digital mode lets you enjoy full

digital surround from software processed in the

Dolby Digital format. Dolby Digital provides

better sound quality and more powerful

presence than conventional Dolby Surround.

This unit is equipped with Dolby Digital 5.1-

channel so that you can enjoy enhanced full

digital surround sound. Being different from

Dolby Pro Logic in which only four channels 

(Front Left, Front Right, Center and Rear) are

used, the new system provides stereo

separation of the rear speakers (Rear-Right,

Rear-Left). These 5 channels, together with the

subwoofer channel for bass sounds (counted as

0.1 channel), constitute as 5.1-Channel (or 6

Channels) Input for Dolby Digital that brings

you the most sophisticated sound enjoyment. 

Dolby Pro Logic II 

The Pro Logic II mode uses the built-in circuit to

steer the Left, Center, Right and Surround left

and right channel audio signals and uses all five

speakers to play both stereo and Dolby Pro

Logic program source, such as TV and VCR.

Dolby Pro Logic II includes Dolby Pro Logic II

Movie, Dolby Pro Logic I Music and Dolby Pro

Logic Emulation.

You can use this mode with any stereo program

source (such as VCR/SAT) to enjoy multi-channel

sound experience.

Dolby 3 Stereo

The 3 Stereo mode will redirect the Surround

signals to the front left and right speakers

when only the front and center speakers 

are used.

Stereo

The Stereo mode uses the two main channel

outputs from the front speakers. Use this mode

if you have connected the front speakers only. 

DSP (Digital Sound Processor)

These digital sound effects resemble sounds in

a real environment such as (STEREO, HALL,

CHURCH, CLUB, STADIUM, STUDIO, 3 STEREO,

DOLBY PL EMULATION, DOLBY PL II MUSIC,

DOLBY PL II MOVIE). DSP automatically

converts analog audio signals to digital ones

which enables you to adjust the sound without

degrading the sound quality. Different modes

will give you different feels of size and types of

listening environment. 

Dynamic Bass Amplified System (dBas)

With “Dynamic Bass Amplified System” (dBas),

the discrete amplifier is located in the unit so

the subwoofer keeps the power needed to

reproduce powerful effects. Four settings are

available: SOFT, BALANCE, STRONG 

and POWERFUL.

Press  SUBWOOFER

to select the subwoofer

(dBas) effects level according to your needs.

Fine Setting of the Components
You can select the surround mode by pressing

SURROUND  repeatedly to select among

different options. (STEREO, HALL, CHURCH,

CLUB, STADIUM, STUDIO, 3 STEREO, DOLBY PL

EMULATION, DOLBY PL II MUSIC, 

DOLBY PL II MOVIE)

The default surround modes for different

components are listed in the table below The

unit will keep the last selection in memory.

Input Signal Setting

The unit defaults to the most convenient

settings for your easiest use (see table). 

If your connection is different from the 

default setting, 

1. Select the source 

2. Press the  SETUP button to show 

setup options.

3. Press  /

until OPTICAL or COAXIAL 

is displayed.

4. Press 

/

to select among optical/ coaxial

to match your connection. Your selection will

be stored automatically. 

Digital Input

Select this setting to play digital signals from a

DVD or SAT.

Analog Input

This unit is defaulted to play analog signals

from TV, VCR and line-in.

Fine Setting of the Speakers 
All the basic settings have already been pre-set

for the speakers included in the box.

Also, to make the surround sound more

effective and suit the acoustic conditions in

your listening room, you may need to delay the

signal coming from some of the speakers.

Channel delay compensates for center or

surround speakers that are closer to the

listening position than the front speakers. 

Testing Speaker Loudness 

You can listen to the loudness of the 

individual speakers. 

1. Press  TEST TONE  on the remote control.

A short noise will be heard in the speakers

one by one. The speaker having the noise at 

that moment will be shown in the display.

2. Turn the  VOLUME knob or press 

VOL + or  VOL - on the remote control to

adjust the master volume (if necessary).

3. Press  TEST TONE to exit.

Adjust Individual Speaker Volume

1. To adjust individual speaker volume level, 

press  LEVEL on the remote control.

2. Continue to press  LEVEL on the remote

control to select the channel to be adjusted,
then press 

/

to adjust the level.

Speaker Configurations
You can also change the setup of the speakers.

Use a subwoofer to enjoy optimum sound.

For optimum surround experience measure the

distance between the speaker and your favorite

listening position. Press  DISTANCE

to adjust

the speakers’ distance.

1. Press the  DISTANCE button to show 

setup options.

2. Press the  DISTANCE  until the speaker you

want to change is displayed. 

3. Press 

/

to change the speaker

settings.Your selection will be 

stored automatically. 

4. Repeat step 2 and 3 to set up the 

next speaker. You may adjust the distance

within the following ranges:

•  Front Speaker distance (FRNT): 0-30 ft

•  Center Speaker distance (CNTR): 0-30 ft

•  Rear Speaker distance (SURR): 0-30 ft

5. When set up is done, wait for five seconds to

automatically save your settings or press any

buttons to save your selection and set 

up mode. 

Factory defaulted Advance setting

indication from VFD

The unit has defaulted the 

following distances:

•  Front speakers (FRNT)

15 ft

•  Center speaker (CNTR)

15 ft

•  Rear speakers (SURR)

10 ft

Front Surround Sound Effect (FSsE) Setting

1. Press  SETUP button on remote control to

show setup options.

2. Press  /

until F SURR N is displayed.

3. Press 

/

to select between Y(Yes) and 

N (No).

4. Press 

/

until ROOM is displayed.

5. Press 

/

to select among S (SMALL),

M(MID), L(LARGE).

Your selection will be stored automatically. 

You can use this function if placing the rear

speakers (surround speakers) at the back is not

a good choice for you. See “Speaker

Configurations/Front Surround Mode Speaker

Placement” for details)

You can use this function to control different

levels of surround sound. You can select among

SMALL, MID, LARGE according to your 

room size:

SMALL : room size below 

12ft x12 ft (3.6m x3.6m)

MID : room size between 

12ft x12ft – 16ft x16 ft (5m x5m)

LARGE : room size over 16ft x16ft.

Center/Surround Speaker Setup

1. Press  SETUP button on remote control to

show setup options.

2. Press 

/

until  CTR YES  or  SURR YES

is displayed.

3. Press 

/

to select between  YES and  NO .

VFD Dimmer Setup
1. Press  SETUP button on remote control to

show setup options.

2. Press  /

until  DIMMER 0 is displayed.

3. Press 

/

to select between  0 and  1.

Operating Your Unit

Troubleshooting Tips

Care and Maintenance

Care and Maintenance

Technical Specifications

Limited Warranty (U.S.)

Limited Warranty

Advanced Sound Control

Advanced Sound Control

Advanced Sound Control

Note

Tips:

When the FM station broadcasts Stereo

sound is found, STEREO is displayed.

When you tune at a weak FM station

manually, press  MONO/ST on remote

control to switch from Stereo to Mono

mode. This will reduce the 

background noise.

If there is any interference, change the

antenna’s position until ideal sound

reception is obtained. TV and other

electronic devices could be the cause of

interference, so try to position the

antenna away from them.

• A 

weak signal can affect the “Automatic

preset programming” function’s efficiency.

Adjust the antenna for better reception

and a more efficient search.

Tips:

•  The songs in the root directory will be

played first before all the sub-folders and

songs under the first folder is played.

•  This unit supports over 64K WMA bitrate. 

•  Maximum ID3 characters that can be

displayed are 30 characters

•  Only English characters are supported.

Other characters may not be 

shown properly.

Front Left Speaker

Front Right Speaker

Subwoofer

Center Speaker

Rear Right Speaker

Rear Left Speaker

Listening 

Zone

Front Left Speaker

Front Right Speaker

Center Speaker

Listening 

Zone

If digital input
(optical or 
coaxial) is
selected
Dolby Digital
N/A
Dolby Digital
AM/FM
N/A
N/A
N/A

If analog input is
selected

N/A
Pro Logic II Movie
N/A
Stereo
Pro Logic II Movie
Stereo
Stereo

Source Input

DVD/DVR
TV
SAT•CAB
AM/FM
VCR
USB
LINE-IN

Default input
Coaxial (DVD/COAX)
Analog (TV/ANL)
Optical (SAT/OPT)
Built-in tuner
Analog (VCR/ANL)
Digital
Analog

Source
DVD/DVR
TV
SAT•CAB
AM/FM
VCR
USB
LINE-IN

R/S

L/S

Rch

Cch

Lch

Front

Left

Rear

Right

Rear

Left

Front

Right

Center

Notes:

•  CTR stands for Center Speaker selection

while SURR stands for Surround 

Speaker selection.

•  By default, the Center and Surround

Speakers are set to YES. If you decide not

to use them, set the ones you do not

intend to use to NO so the sound

performance is not affected.

Disconnect the audio system from the power

source before performing any maintenance.

Cleaning the Exterior
Disconnect the system from AC power before

cleaning the exterior of the system with a soft

dust cloth, or with a slightly damp leather

chamois. Never use strong solvents.

Important Battery Information
•  Remove the batteries to avoid leakage if you 

do not use your remote control for more 

than one month. 

•  Discard leaky batteries immediately as 

leaking batteries may cause skin burns or 

other personal injuries. 

•  Dispose of batteries in the proper manner,

according to provincial and local regulations.

•  Any battery may leak electrolyte if mixed

with a different battery type, if inserted 

incorrectly, if all batteries are not replaced at 

the same time, if disposed of in fire, or if an 

attempt is made to charge a battery not 

intended to be recharged.

Main Unit

1. ON/STANDBY

Turns on/off the unit. When the unit is turned

on, the unit will go to the mode it was in

before powered off.

2.
Starts and pauses playback in USB mode.

3.
Stops playback in USB mode.

4.

/

(PRESET buttons)

Selects preset stations in AM/FM mode. Directly

accesses the previous or next track in 

USB mode.

5. USB jack

Connects USB devices.

6. LINE IN

Connects components for audio input.

7.

/

(SURROUND buttons)

Selects among digital sound processors. 

(STEREO, HALL, CHURCH, CLUB, STADIUM,

STUDIO, 3 STEREO, DOLBY PL EMULATION,

DOLBY PL II MUSIC, DOLBY PL II MOVIE)

8. DVD/DVR, TV, SAT.CAB, AM/FM, VCR, 

USB and LINE-IN (SOURCE buttons)

Selects sound source. 

9. Headphones jack

10.MASTER VOLUME 

Adjusts the volume.

11.SUBWOOFER 

Selects among subwoofer output levels. (SOFT

SUBWOOFER, BALANCE SUBWOOFER, STRONG

SUBWOOFER, POWERFUL SUBWOOFER)

Remote Control 
Install "AAA" ("UM-4"/"R03") batteries to the

remote control prior to use.

1. ON•OFF 

Turns on/off the unit. 

2. Number buttons

Directly accesses a preset station in 

AM/FM mode. 

3. MEMORY

Stores station in AM/FM mode. 

4. MONO/ST

Selects between Stereo and Mono sound in 

FM mode.

5. TEST TONE

Speaker test tone setting. Refer to “Advanced

Sound Control” for details.

6. NIGHT

Selects among night mode options (DRC OFF,

SOFT and ON) which compresses the volume

difference between normal voices and sounds

such as explosions. (Available only during

Dolby digital signal playback) 

7. EQ

Selects among preset equalizer mode (FLAT,

POP, JAZZ, ROCK, CLASSIC, BASS and TREBLE). 
Press 

/

to adjust the bass or treble level.

This function is only available in Stereo mode.
8. SURROUND

Selects digital sound processors. (STEREO, HALL,

CHURCH, CLUB, STADIUM, STUDIO, 3 STEREO,

DOLBY PL EMULATION, DOLBY PL II MUSIC,

DOLBY PL II MOVIE)

9.  SETUP
Enters Setup mode. Use  /

to select among

setup options. (DIMMER,CENTER SPK

YES/NO,SURROUND SPK YES/NO,

COAXIAL/OPTICAL, FRONT SURROUND, ROOM

SMALL/MID/LARGE).

10.DISTANCE

Adjusts the speakers’ distance.

11.

/

/ /

•  Press  /

to select among setting items in

Setup mode.

•  Press 

/

to adjust the values when the

display shows the setup you want 

to change. 

•  In AM/FM mode, press 

TUNER -  and

TUNER +  to tune down or up the 

radio frequency. 

12.MUTE

Mutes all sound.

13. SUBWOOFER

Selects among subwoofer sound levels. (SOFT

SUBWOOFER, BALANCE SUBWOOFER, STRONG

SUBWOOFER, POWERFUL SUBWOOFER)

14.LEVEL 

Speaker level setting. Refer to “Advanced

Sound Control” for details.

15.VOL + / VOL -

Adjusts the volume.

16.CH+ / CH-

Selects programmed stations in AM/FM mode.

Directly accesses the next or previous file in 

USB mode.

17.Operation Buttons (In USB mode only)

•  Press  PLAY ,  STOP and  PAUSE to access the

relative functions.

•  Press  REV or  FWD starts reverse or forward

accelerated play.

•  Press  DISPLAY to access MP3/WMA ID3

information and current play time,current

play Folder and Track number,Play Mode.

•  Press  REPEAT to access the repeat function.

•  Press  RANDOM to turn on/off 

random playback.

•  Press  INTRO to enter intro mode.

18.SLEEP

Enters sleep mode and selects sleep time.

19.Source buttons

Selects audio sources.

Selecting Source
When one of the SOURCE buttons on the front

panel or on the remote control is pressed, the

input corresponding to the name will 

be activated.

The unit acts as a switching device between all

the sources that are plugged into it.

Example 1: 

If you have connected a DVD player to the DVD

input on the unit, press 

DVD/DVR on the front

panel or on the remote control to receive the

sounds transmitted by the DVD.

Example 2: 

Based on the example 1, the DVD is playing , if

a VCR is connected to the VCR input of the

unit, press  VCR on the front panel or on the

remote control. The sound from the VCR source

will replace the DVD.

You can connect up to 6 audio sources to 

this amplifier:

The source name selected shown on the display. 

Playing a DVD with the unit
1. Connect a DVD player to the unit. 

2. Press  ON/STANDBY

on the main unit or press

ON•OFF on the remote control to switch on

the unit.

3. Press  DVD/DVR on the main unit to select

the DVD source.

4. Switch ON the DVD player and 

start playback.

5. Set the sound mode if needed (see

"Advanced Sound Control" for details).

Example: 

To  play Dolby Prologic II Movie sound, press 

the  SURROUND buttons until "Dolby PL II 

MOVIE" appears on the Display.

To  play Dolby Digital sound, the source must be

connected to the unit via the optical or coaxial

terminal. Refer to "Input Signal Setting" of

"Advanced Sound Control"for details.

Radio
The unit has a built-in tuner that allows for

AM/FM radio function.

Manual Tuning

1. Connect the FM antenna and the AM loop

antenna at the back of the unit. Rotate the

AM loop for better reception.

2. Press  AM/FM .

3. Tune a station by pressing 

TUNER+/-

repeatedly until the desired station is found.

Alternatively, you can press and hold the

same buttons down for about one second to

activate the automatic search function. In

this mode the unit will automatically tune

frequencies until it finds a station.

4. Repeat step 3 to tune to another 

radio station.

5. Press  AM/FM to select between FM 

and AM.

Storing Radio Stations

The unit can store up to 40 radio stations 

(30 preset stations for FM and 10 preset

stations for AM) in its memory. You can enter

every single radio station yourself or the unit

can store all available radio stations

automatically in ascending order.

General Controls

General Controls

Operating Your Unit

1
2

3

4

9

8

7

6

5

10

11

2

3
4
9

12

15

19

1

5

6

7
8

10

11

14

13

16

17

18

SOURCE buttons
on remote
control
DVD
TV
SAT
AM/FM
VCR
USB

LINE IN

Corresponding
connector at the
rear panel
DVD
TV
SAT/CAB
built-in
VCR
USB jack at front
panel
Line in jack at
front panel

SOURCE
buttons on
front panel
DVD/DVR
TV
SAT•CAB
AM/FM
VCR
USB

LINE-IN

Notes:

•  Your unit has a built in tuner. Just connect

the appropriate antenna to the back of

the unit and you will be able to listen to

radio stations. (See details in 

Radio section)

•  Other sources can be connected to the

above standard source. 

•  Connections at the back panel can be

interchanged if sources have the same

audio input. Example, you can connect a

TV to VCR inputs and connect a VCR to 

TV input.

Front Left

Speaker 

Front Right

Speaker 

Subwoofer 

Center Speaker 

Rear Left

Speaker 

Rear Right

Speaker 

Front Left

Speaker 

Center Speaker 

Front Right

Speaker 

Manufactured under license

from Dolby Laboratories.

"Dolby", "Pro Logic", and

the double-D symbol are

trademarks of 

Dolby Laboratories.

7

AVC MULTIMEDIA (“AVC”)  makes the following limited warranty. This limited warranty extend to
the original consumer purchaser and is limited to non-commercial use of the product.
One Year Parts & Labor Warranty

AVC  products purchased in the United States are warranted to be free from defects in materials or

workmanship for a period of one year from the date of their original retail purchase. If the unit fails to

conform to this warranty, we will service the product using new or refurbished parts and products,
at AVC ’s sole discretion.
During a period of one year from the effective warranty date,  AVC  will provide, when needed,

service labor to repair a manufacturing defect at its  designated Service Center. To obtain warranty

service in the Untied States, you must first call our  Customer Support Center at 

1-877-252-6873, during the hours listed in the box on the right.

 The determination of

service will be made by  AVC  Customer Support.  PLEASE DO NOT RETURN YOUR UNIT TO AVC

WITHOUT PRIOR AUTHORIZATION.  New or remanufactured replacements for defective parts or

products will be used for repairs by  AVC  at its designated Service Center for one year from the

effective warranty date. Such replacement parts or products are warranted for an additional one

year from the date of repair or replacement. The Customer will be required to ship the unit to the

Service Center indicated at the time Customer Support is contacted to make the necessary repairs.

The customer is responsible for all transportation charges to the service facility.

Packaging and Shipping Instruction

When you send the product to the  AVC  service facility you must use the original carton box and

packing material or an equivalent as designated by  AVC

.

LIMITED WARRANTY

Your Responsibility

1) You must retain the original sale receipt to provide proof of purchase.
2) These warranties are effective only if the product is purchased and operated in the U.S.A. or

Canada.

3) Warranties extend only to defects in material or workmanship, and do not extend to any product

or parts which have been lost or discarded, or damage to product or parts caused by misuse,

accident, improper operation or maintenance, or use in violation of instructions provided with the

product, or to product which has been altered or modified without authorization of AVC, or to

products or parts thereof which have had the serial number removed or changed.

Out of Warranty
In the event your product requires repair after the limited warranty period has expired,

please  contact  our  Customer  Support  Center  at  1-877-252-6873  or

www.1800customersupport.com/RCA

Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm,

                 Saturday: 9am–NOON Eastern time.
Important:  You are responsible for any transportation, shipping or insurance relative to the
return of product to our Product Returns Center.

All warranties implied by state law, including the implied warranties of merchantability and fitness for

a particular purpose, are expressly limited to the duration of the limited warranties set forth above.

With the exception of any warranties implied by state law as hereby limited, the foregoing warranty

is exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of

manufacturer or seller with respect to the repair or replacement of any parts. In no event shall  AVC

be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms

of these warranties in any manner whatsoever. The time within action must be commenced to
enforce any obligation of  AVC  arising under the warranty or under any statute, or law of the United

States or any state thereof, is hereby limited to one year from the date of purchase. This limitation

does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary,

from state to state. Some states do not allow limitation on how long an implied warranty lasts, when

an action may be brought, or the exclusion or limitation of incidental or consequential damages, so

the above provisions may not apply to you.

For  more  information  on  other  products  and  services,  please  visit  our  web  site  at

www.1800customersupport.com/RCA

Important:  Also keep your “Bill of Sale” as proof of purchase.
Model no. ..............................................................Product name......................................................

Type of set ...............................................................................................................................
Serial  no. .................................................................................... Invoice no. ...........................................................
Date purchased

................................................................. Dealer name .......................................................................

FOR SERVICE AND REPAIR, PLEASE VISIT 

www.1800customersupport.com/RCA

Specifications and external appearance are subject to change without notice.

0.763798s