RCA RP5605R User's Manual

RCA Clock Radio User's Manual - RP5605R.
Download
Page  of 1
4.3, 2226 votes
background image

Stop the wake function: 
Press OFF.  The wake function will 
activate again on the following day 
at the same time.

Cancel the wake function 
completely: 
Press WAKE MODE repeatedly until 
no indicator lights against the wake 
source icons. The set wake time will 
not be erased and can be used the 
next time when you switch on wake 
function again.

Setting clock
1. Press CLOCK SET once. The 

current clock time fl ashes on the 
display.  

2. Press 

 or 

 to set the clock 

time. The time decrements or 
increments will follow by a faster 
rate when you press and hold 
the buttons. AM or PM indicator 
also lights beside the time on the 
display.

user manual

guide de l’utilisateur

EN/F
It is important to read this user manual prior to using your new product for the fi rst time.
Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau 
produit pour la première fois.

RP5605

RP5605R

v6.0 (1.0.6.0) (EN/F) 

IMPORTANT SAFETY INSTRUCTIONS

Sleep function

Top view

If you set Sleep function 
with low volume level 
before going to bed, we 
advise using Wake to Alarm mode.

Battery back-up operation
The power failure protection circuit 
will not operate unless battery is 
installed.

No worry battery backup
When the battery backup functions, 
the digital display will not light, 
however, the wake function still 
occurs during the power interruption 
if remaining battery power is 
adequate.  

Normal operation will resume after 
AC power is restored so you will not 
have to reset the time or wake.

Left view

Right view

TUNING – selects radio frequency

BAND AM/FM – selects radio band

Switching on
Press RADIO ON to turn on the 
radio.

Switching band
Slide the BAND/AM•FM switch on 
the right of the unit to select AM or 
FM band.

Tuning radio
Rotate the TUNING dial on the right 
of the unit to select radio frequency.

Antennas
AM Antenna – A built-in ferrite 
rod antenna eliminates the need 
for an outside antenna for AM 
reception.  Rotating the unit slightly 
may improve reception of distant 
AM stations.

Setting wake time
1. Press WAKE TIME once. The 

current wake time fl ashes on the 
display.  

2. Press 

 or 

 to set the wake 

time. The time decrements or 
increments will follow by a faster 
rate when you press and hold 
the buttons. AM or PM indicator 
also lights beside the time on the 
display.

3. When fi nished, wait for about 5 

seconds or press WAKE TIME to 
exit wake time setting mode.

•  The Wake to Alarm mode (read 

below) will be automatically 
activated whenever the wake 
time has been set.

Selecting wake source
1.  If your desired wake source is 

radio or CD:

•  Wake to Radio – select an AM or 

FM station (refer to “Radio”).

•  Wake to CD – insert a CD in the 

CD compartment. 

2.  Set a wake time (refer to 

“Setting wake time”).

3. Press WAKE MODE repeatedly 

to select a wake source. The 
indicator lights against the wake 
source icons on the right of the 
display to indicate the currently 
selected wake source:

•  Once the wake source is selected, 

the wake function will be 
activated at the set wake time.

Checking wake time
Press WAKE TIME to show the 
current wake time which fl ashes 
briefl y on the display. 

You can set the duration (up to 90 
min) before the radio or CD player 
turns off automatically.

1.  Press SLEEP repeatedly to select 

a duration (90, 80, 70, 60, 50, 
40, 30, 20, 10min or OFF) before 
the radio or CD player turns off 
automatically.

•  The default sleep time is 60 

minutes.

•  By default, the radio will be 

switched on once SLEEP is 
pressed. You may change to 
listen to the CD player by 
pressing 

 if a disc is loaded.

2.  To check the remaining duration 

before the unit turns off, press 
SLEEP once.

3.  To cancel the sleep function, 

press SNOOZE or OFF.   

Alkaline (NEDA 1604A/
IEC 6LR61) battery is 
recommended. Carbon-
zinc battery may be used but 
memory holding time will be 
substantially reduced. Memory 
holding time for a fresh alkaline 
battery is approximately 8 
hours (if radio or alarm are not 
operated) which should take 
care of short, nuisance-type 
AC power failures. To preserve 
battery life, the unit should 
remain plugged into an AC 
outlet. As the battery gets older, 
its voltage drops and memory 
may be lost. Be sure to replace 
the battery periodically. Battery 
should be removed if the unit 
will be stored for more than one 
month. Leaky battery can badly 
damage the clock radio.  

For your records
In the event that service should be 
required, you may need the model 
number and the serial number.  In 
the space below, record the date 
and place of purchase and the serial 
number:
Model No.: 
Date of Purchase: 
Place of Purchase: 
Serial No.:

Service information
This product should be serviced 
only by those specially trained in 
appropriate servicing techniques.  
For instructions on how to obtain 
service, refer to the warranty 
included in this user manual.

Technical information
Product: CD/Clock Radio
Brand: RCA
Model: RP5605, RP5605R
Power Supply: 120V ~ 60Hz
Power Consumption: 13 Watts

RADIO ON – turns on the radio; 
selects the radio from other modes

OFF – turns off the unit; turns off the 
wake function and sleep mode

 / 

 – sets clock or wake time; 

skips to previous or next CD track 
during CD playback

+ VOLUME  – adjusts volume

Listening to CD
1.  Lift open the CD compartment 

door.

2.  Insert a disc and close the door.
3. Press   to select CD mode and 

start CD playback.

• Press   to pause playback and 

press again to resume.

4.  Adjust volume to your desired 

level.

5. Press 

 or 

 to skip backward 

or forward a track. Press and 
hold to search through a track.

6. Press   to stop playback. 
7. Press RADIO ON to listen to the 

radio or OFF to turn off the unit.

wake by alarm
wake by radio

wake by CD

Turning off the wake  
function
Silence the wake function 
momentarily:
•  With SmartSnooze™, press 

SNOOZE

 , 

 ,   or 

 to 

turn off the wake function 
temporarily for extra sleep time.

 

•  The wake function will activate 

again when the snooze period (9 
minutes) is over.

•   The snooze period is fi xed and 

cannot be changed. 

•  If disc is paused for 

more than 5 minutes, 
the CD player will 
resume to stop mode 
automatically.

•  If disc is stopped in the CD 

mode for more than 30 
minutes without further 
operations, the unit will turn 
off automatically.   

PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE

Before you begin

Power failure indicator
When AC power is interrupted 
(disconnected) for a short period of 
time, both time and alarm settings 
will change (unless battery is 
installed). After AC power is restored 
(reconnected), the Digital Display 
will blink to indicate that power was 
interrupted and you should readjust 
the time and alarm settings. 

  – stops CD playback

 – turns on the unit from CD mode; 

pauses or resumes CD playback 

SLEEP – activates the Sleep function 

CLOCK SET – activates clock time 
setting mode

WAKE TIME – activates wake time 
setting mode; checks current wake 
time

WAKE MODE – activates wake 
function and changes wake mode

SNOOZE – turns off the wake 
function temporarily; cancels the 
sleep function

Clock

Radio

FM Antenna – The power cord acts 
as your FM antenna.  The power 
cord picks up moderate to strong 
stations and eliminates the need for 
an external antenna in most strong 
signal areas.  Be sure the power cord 
is stretched out to its full length.  Do 
not coil or bunch the cord together.  
Changing position of the power cord 
may improve reception.

Built-In AFC – The Built In 
Automatic Frequency Control (AFC) 
works only on FM. It helps reducing 
drift on FM reception and keeping 
the radio locked in on the FM station 
to which it is tuned.

When tuning in FM stations, you 
may notice that the station you are 
tuning can be well-tuned on two 
or three nearby points on the dial. 
Always tune carefully at the loudest 
and clearest point.

CD player

Wake function

General controls

Warranty information

Warranty information
12 Month Limited Warranty
Applies to RCA Audio/Video 
Products
•  AUDIOVOX ELECTRONICS CORP. 

(the Company) warrants to the 
original retail purchaser of this 
product that should this product 
or any part thereof, under 
normal use and conditions, be 
proven defective in material or 
workmanship within 12 months 
from the date of original 
purchase, such defect(s) will 
be repaired or replaced with 
reconditioned product (at the 
Company’s option) without 
charge for parts and repair labor.

•  To obtain repair or replacement 

within the terms of this 
Warranty, the product is to be 
delivered with proof of warranty 
coverage (e.g. dated bill of 
sale), specifi cation of defect(s), 
transportation prepaid, to the 
Company at the address shown 
below.

•  This Warranty does not extend 

to the elimination of externally 
generated static or noise, to 
correction of antenna problems, 
loss/interruptions of broadcast 
or internet service, to costs 

incurred for installation, removal 
or reinstallation of product, to 
corruptions caused by computer 
viruses, spyware or other 
malware, to loss of media, fi les, 
data or content, or to damage to 
tapes, discs, removable memory 
devices or cards, speakers, 
accessories, computers, computer 
peripherals, other media players, 
home networks or vehicle 
electrical systems.

•  This Warranty does not 

apply to any product or 
part thereof which, in the 
opinion of the Company, has 
suffered or been damaged 
through alteration, improper 
installation, mishandling, 
misuse, neglect, accident, or by 
removal or defacement of the 
factory serial number/bar code 
label(s). THE EXTENT OF THE 
COMPANY’S LIABILITY UNDER 
THIS WARRANTY IS LIMITED TO 
THE REPAIR OR REPLACEMENT 
PROVIDED ABOVE AND, IN NO 
EVENT, SHALL THE COMPANY’S 
LIABILITY EXCEED THE PURCHASE 
PRICE PAID BY PURCHASER FOR 
THE PRODUCT.

•  This Warranty is in lieu of 

all other express warranties 

or liabilities. ANY IMPLIED 
WARRANTIES, INCLUDING 
ANY IMPLIED WARRANTY 
OF MERCHANTABILITY, 
SHALL BE LIMITED TO THE 
DURATION OF THIS WRITTEN 
WARRANTY. ANY ACTION FOR 
BREACH OF ANY WARRANTY 
HEREUNDER INCLUDING ANY 
IMPLIED WARRANTY OF 
MERCHANTABILITY MUST BE 
BROUGHT WITHIN A PERIOD 
OF 24 MONTHS FROM DATE 
OF ORIGINAL PURCHASE. 
IN NO CASE SHALL THE 
COMPANY BE LIABLE FOR ANY 
CONSEQUENTIAL OR INCIDENTAL 
DAMAGES FOR BREACH OF THIS 
OR ANY OTHER WARRANTY. 
No person or representative is 
authorized to assume for the 
Company any liability other than 
expressed herein in connection 
with the sale of this product.

•  Some states do not allow 

limitations on how long an 
implied warranty lasts or the 
exclusion or limitation of 
incidental or consequential 
damage so the above limitations 
or exclusions may not apply to 
you. This Warranty gives you 
specifi c legal rights and you may 

also have other rights which vary 
from state to state.

How to make a warranty claim:
•  If your product is capable of 

storing content (such as an mp3 
player, digital voice recorder, 
etc), it is recommended to 
make periodic backup copies of 
content stored on the product. 
If applicable, before shipping a 
product, make a back up copy 
of content or data stored on 
the device. Also, it is advisable 
to remove any personal 
content which you would not 
want exposed to others. IT IS 
LIKELY THAT CONTENTS AND 
DATA ON THE DEVICE WILL BE 
LOST DURING SERVICE AND 
REFORMATTING. AUDIOVOX 
ACCEPTS NO LIABILITY FOR LOST 
CONTENT OR DATA, OR FOR THE 
SECURITY OF ANY PERSONAL 
CONTENT OR DATA ON THE 
RETURNED DEVICE. Product will 
be returned with factory default 
settings, and without any pre-
loaded content which may have 
been installed in the originally 
purchased products.  Consumer 
will be responsible for reloading 
data and content. Consumer will 

be responsible to restore any 
personal preference settings. 

•  Properly pack your unit. Include 

any remotes, memory cards, 
cables, etc. which were originally 
provided with the product. 
However DO NOT return any 
removable batteries, even if 
batteries were included with 
the original purchase. We 
recommend using the original 
carton and packing materials.

•  Include evidence of purchase 

date such as the bill of sale. Also 
print your name and address and 
a description of the defect. Send 
via standard UPS or its equivalent 
to:

 

Audiovox Electronics Corp.

 

Attn: Service Department.

 

150 Marcus Blvd.  

 

Hauppauge N.Y. 11788

 1-877-833-3491

•   Insure your shipment for loss or 

damage. Audiovox accepts no 
liability in case of damage or loss 
en route to Audiovox.

•   Pay any charges billed to you by 

the Exchange Center for service 
not covered by the warranty.

•   A new or refurbished unit will be 

shipped to you freight prepaid.

What we will do:
Provide you with a new, or at our 
option, a refurbished unit. The 
exchange unit is under warranty 
for the remainder of the original 
product’s warranty period. 

For Canada Customers, please 
ship to:

Audiovox Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 16,
Mississuaga, Ontario
L5T 3A5

© 2010 Audiovox Accessories Corporation

111 Congressional Blvd., Suite 350

Carmel, IN 46032

Trademark(s) ® Registered

Printed in China

Visit http://store.audiovox.com to find the best 

accessories for your products. 

Some of the following information 
may not apply to your particular 
product; however, as with any 
electronic product, precautions 
should be observed during handling 
and use.
•  Read these instructions. 
•  Keep these instructions. 
•  Heed all warnings. 
•  Follow all instructions. 
•  Do not use this apparatus near 

water. 

•  Clean only with dry cloth. 
•  Do not block any ventilation 

openings. Install in accordance 
with the manufacturer’s 
instructions. 

•  Do not install near any heat 

sources such as radiators, heat 
registers, stoves, or other 
apparatus (including amplifi ers) 
that produce heat. 

•  Do not defeat the safety purpose 

of the polarized or grounding-
type plug. A polarized plug 
has two blades with one wider 
than the other. A grounding 
type plug has two blades and 
a third grounding prong. The 
wide blade or the third prong is 
provided for your safety. If the 
provided plug does not fi t into 
your outlet, consult an electrician 
for replacement of the obsolete 
outlet. 

•  Protect the power cord from 

being walked on or pinched 
particularly at plugs, convenience 
receptacles, and the point where 
they exit from the apparatus. 

•  Only use attachments/accessories 

specifi ed by the manufacturer. 

• Use 

only 

with the 
cart, stand, 
tripod, 
bracket, 
or table 
specifi ed by 
the manufacturer, or sold with 
the apparatus. When a cart is 
used, use caution when moving 
the cart/apparatus combination 
to avoid injury from tip-over.

•  Unplug this apparatus during 

lightning storms or when unused 
for long periods of time. 

•  Refer all servicing to qualifi ed 

service personnel. Servicing is 
required when the apparatus 
has been damaged in any way, 
such as power-supply cord or 
plug is damaged, liquid has been 
spilled or objects have fallen into 
the apparatus, the apparatus 
has been exposed to rain or 
moisture, does not operate 
normally, or has been dropped. 

ADDITIONAL SAFETY 
INFORMATION
•   Apparatus shall not be exposed 

to dripping or splashing and no 
objects fi lled with liquids, such 
as vases, shall be placed on the 
apparatus.

•   Always leave suffi cient space 

around the product for 
ventilation. Do not place 
product in or on a bed, rug, in 
a bookcase or cabinet that may 
prevent air fl ow through vent 
openings.

•   Do not place lighted candles, 

cigarettes, cigars, etc. on the 
product.

•   Connect power cord only to AC 

power source as marked on the 

product.

•   Care should be taken so that 

objects do not fall into the 
product.

•   Do not attempt to disassemble 

the cabinet. This product does 
not contain customer serviceable 
components.

•  The marking information 

is located at the bottom of 
apparatus.

•  To be completely disconnect the 

power input, the main plug of 
apparatus shall be disconnected 
from the mains.

•  Main plug is a disconnect device. 

The main plug should not be 
obstructed OR should be easily 
accessed during intended use.

•  The ventilation should not 

be impeded by covering the 
ventilation openings with items 
such as newspaper, table-cloths, 
curtains etc.

•  No naked fl ame sources such as 

lighted candled should be placed 
on the apparatus.

•  Attention should be drawn to 

the environmental aspects of 
battery disposal.

•  The use of apparatus in 

moderate climates.

This equipment is a Class 
II or double insulated 
electrical appliance. It 
has been designed in 
such a way that it does 
not require a safety 
connection to electrical 
earth.  

Plugging in for power
AC OUTLET POWER SUPPLY: 
120 V~60 Hz

The AC power plug 
is polarized (one 
blade is wider than 
the other) and only 
fi ts into AC power 
outlets one way. 
If the plug will 

not go into the outlet completely, 
turn the plug over and try to insert 
it the other way. If it still does not 
fi t, contact a qualifi ed electrician to 
change the outlet, or use a different 
one.  Do not attempt to bypass this 
safety feature.

Important battery 
precautions
•  Any battery may present a risk of 

fi re, explosion, or chemical burn 
if abused. Do not try to charge 
a battery that is not intended to 
be recharged, do not incinerate, 
and do not puncture.

• Non-rechargeable 

batteries, 

such as alkaline batteries, may 
leak if left in your product for 
a long period of time. Remove 
the batteries from the product if 
you are not going to use it for a 
month or more.

•  If your product uses more than 

one battery, do not mix types 
and make sure they are inserted 
correctly. Mixing types or 
inserting incorrectly may cause 
them to leak.

•  Discard any leaky or deformed 

battery immediately. They 
may cause skin burns or other 
personal injury.

•  Please help to protect the 

environment by recycling or 
disposing of batteries according 
to federal, state, and local 
regulations.

]

Portable Cart Warning

Note:  This equipment has been 
tested and found to comply with 
the limits for a Class B digital device, 
pursuant to Part 15 of FCC Rules. 
These limits are designed to provide 
reasonable protection against 
harmful interference in a residential 
installation. This equipment 
generates, uses, and can radiate 
radio frequency energy and, if not 
installed and used in accordance 
with the instructions, may cause 
harmful interference to radio 
communications. 

However, there is no guarantee 
that interference will not occur 
in a particular installation. If this 
equipment does cause harmful 
interference to radio or television 
reception, which can be determined 
by turning the equipment off and 
on, the user is encouraged to try to 
correct the interference by one or 
more of the following measures:
•   Reorient or relocate the receiving 

antenna.

•   Increase the separation between 

the equipment and receiver.

•   Connect the equipment into an 

outlet on a circuit different from 
that to which the receiver is 
connected.

•   Consult the dealer or an 

experienced radio/TV technician 
for help.

Changes or modifi cations not 
expressly approved by Audiovox 
could void the user’s authority to 
operate the equipment.

FCC Information

WARNING: The battery (battery or 
batteries or battery pack) shall not 
be exposed to excessive heat such as 
sunshine, fi re or the like. 

Ecology
Help protect the environment - we 
recommend that you dispose of 
used batteries by putting them into 
specially designed receptacles. 

Illustrations contained within this 
publication are for representation 
only and subject to change.

The descriptions and characteristics 
given in this document are given as 
a general indication and not as a 
guarantee.  In order to provide the 
highest quality product possible, 
we reserve the right to make any 
improvement or modifi cation 
without prior notice.  

Install battery as follow:
1.  Remove battery compartment 

door (located at the bottom of 
the radio) by applying thumb 
pressure to the tab on battery 
door and then lift the door out 
and off the cabinet.

2.  Connect a 9-volt battery (not 

supplied) to the connector plug.

3.  Replace the compartment door.

3. When fi nished, wait for about 5 

seconds or press CLOCK SET to 
exit clock setting mode.

0.631689s