RCA RCR4358 User's Manual

RCA Remotes User's Manual - RCR4358.
Download
Page  of 6
4.2, 2224 votes
background image

Four-Component  

Universal Remote
Congratulations on your purchase of this four-component 
universal remote. This universal remote controls up to four 
electronic components and makes juggling remote controls a 
thing of the past. Your remote is guaranteed to work with all 
brands of components. And, not only is your remote easy to 
program, it’s easy to operate, too. We’ve specially designed this 
remote with big buttons to give you total control…at the touch 
of your fingertips.

SAVE THIS MANUAL AND THE CODE LISTS! 
Remote controls can sometimes lose their programming when you 
change the batteries. Make sure you keep the manual and code lists in 
a safe place so that you can reprogram the remote if you need to.

Tip: The four-component universal remote is already programmed 
to operate most RCA, GE and PROSCAN branded TVs, VCRs, 
DVD players and satellite receivers. Just press the corresponding 
key—DVD•VCR for a DVD player, TV for a television, SAT•CBL 
for a satellite receiver, DVR•AUX for a DVR.

Component 
keys (TV
SAT•CBL
DVD•VCR
DVR•AUX)

Dedicated 
MENU and 
GUIDE 
keys let 
you access 
advanced 
component 
functions

Transport 

keys for 

DVD/DVR 

control

CH and 
VOL keys 
have dual 
functions: 
they can 
act as 
navigation 
keys in 
menu 
systems 
as well as 
channel 
and volume 
controllers 
outside the 
menus

INFO key 

displays 

information 

for the 

component 

you’re 

controlling

Battery Installation and Information
Your universal remote requires two AAA alkaline batteries 
(batteries may or may not be included, depending on model).

To install the batteries:
1.  Press and push the battery 

compartment cover to remove it.

2.  Insert the batteries, matching the 

batteries to the (+) and (–) marks 
inside the battery compartment.

3.  Push the battery cover back into place.

Note: If you are replacing batteries, try not to press any buttons after 
you’ve taken the old batteries out. Pressing buttons while replacing 
batteries causes the remote to lose the devices you’ve programmed. You 
will need to program the remote again.
Battery Precautions:  

• Do not mix old and new batteries.  

• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel- 

  cadmium) batteries. 

• Always remove old, weak or worn-out batteries promptly and recycle or  

  dispose of them in accordance with Local and National Regulations.

Battery Saver
Your universal remote control saves battery power by 
automatically turning off if any key is pressed for more than 
60 seconds. This saves your battery life should your remote 
get stuck in a place where the keys remain depressed, such as 
between sofa cushions.

The INPUT and — (dash) key has three functions: 
() it toggles through all the video sources 
connected to your TV; (2) when the remote is in 
VCR mode, this button toggles between VCR and 
the TV input; (3) when you’re entering digital 
channel numbers directly, this button lets you 
separate the main channel number from the 
subchannel number

RCR4258 / RCR4358
Universal Remote Control 

Owner’s Manual 
Manual del Propietario (parte posterior)

Programming Your Remote
Your universal remote can operate a variety of brands of 
components. In order for your universal remote to control your 
components, you need to program the remote with the codes 
that match the components (See Code Lists enclosed or go to 
rca.com/codefinder). These codes enable the remote to 
communicate with your components. Each brand and each 
component has its own “language,” and, by programming the 
correct codes into your remote, you tell the remote to “speak the 
same language” as your components.

Actual 

model may 

vary from 

picture 

shown

Care and Maintenance
• Keep the remote dry. If it gets wet, wipe it dry immediately.
• Use and store the remote only in normal temperature 

environments.

• Handle the remote gently and carefully. Don’t drop it.
• Keep the remote away from dust and dirt.
• Wipe the remote with a damp cloth occasionally to keep it 

looking new.

• Modifying or tampering with the remote’s internal components 

can cause malfunction and invalidate its warranty.

0.571093s