RCA LED42C45RQ User's Manual

RCA LED TV User's Manual - LED42C45RQ.
Download
Page  of 2
4.2, 1262 votes
background image

LED LCD TV

User's Manual

English

Part No.: RN0342R0121

MADE FOR TODAY

LED42C45RQ

MODEL

Date of Purchase

Please register your product at www.rca.com
Please keep your sales receipt and keep the record of the serial number 
and the date of purchase in order to receive warranty parts and service.
The serial number is located at the back of the TV. 

Serial Number

Congratulations on your purchase!  As you enjoy your new product,  

please keep these safety tips in mind :

The Issue
The  home  theater  entertainment  experience  is  a 
growing  trend  and  larger  flat  panel  displays  and 
popular purchases. 

However, flat panel displays are not always supported 
on the proper stands of instal ed according to the 
manufacturer’s recommendations. 

Flat panel displays that are inappropriately situated 
on dressers, bookcases, shelves, desks, speakers, 
chests or cats may fal  over and cause injury.

1 2

2 3

Wal  Mounting :  IF YOU DICIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS : 
- Use a mount that has been recommended by the display manufacturer and/or listed by an independent 
laboratory (such as UL,CSA,ETL).
- Fol ow al  instructions supplied by the display and wal  mount manufacturers.
- If you have any doubts about your ability to safely instal  your flat panel display, contact your retailer about 
professional instal ation.
- Make sure that the wal  where you are mounting the display is appropriate. Some block construction. If you are 
unsure, contact a professional instal er.
- A minimum of two people are required for instal ation. Flat panel displays can be  heavy.

This Manufacturer Cares!
The consumer electronics industry is committed to 
making home entertainment enjoyable and safe.

Tune Into Safety
- One size does NOT fit al . fol ow the manufacturer's 
recommendation for the safe installation and use of 
your flat panel display.

-  Carefully  read  and  understand  all  enclosed 
instructions for proper use of this product.

-  Don't  al ow  children  to  climb  on  or  play  with 
furniture and television sets.

-  Don't place flat panel displays on furniture that can 
easily be used as steps, such as a chest of drawers.

- Remember that children can become excited while 
watching a program, especial y on a "larger than life" flat 
panel display. Care should be taken to place or instal  
the display where it cannot be pushed, pul ed over, or 
knocked down.

- Care should be taken to route al  cords and cables 
connected to the panel display so that they cannot be 
pul ed or grabbed by curious children. 

Caution and Warning

!

CHILD 

SAFETY

It makes A Difference How and Where

You Use Your Flat Panel Display

Child Safety Guide

CONTENTS

07

07

      Channel Bar

08

      Adjusting Volume

08

      EPG (Electronic Program Guide)

08

      Selecting Input Source

07

OSD Menu Operations

08

       Turning On and Off

      Choosing TV Channel

Basic Operations

Child Safety Guide

02

Caution and Warning

02

Safety Precautions

04

Cable Connections

05

Side Panel Connections

05

      Connecting AV Composite video device 

05

TV Signal Connection

05

      Connecting YPbPr Component device 

06

Keypad and Front Panel

07

      Connecting HDMI device

06

      Keypad Buttons

07

How to obtain various kinds of Input Sources 06

      Front Panel

07

TV Jacks Explanation

06

      Check Accessories

05

      Setup TV Table Stand

05

      Select TV Location

05

Preparation for Your New TV

05

      Connection and Using

05

07

¡Muchas gracias por su uso del presente producto!

Cuando usted disfruta de su nuevo producto,  por favor tenga 

en cuenta los consejos de seguridad:

Posibles Problemeas
- La experiencia de entretenimiento de cine en casa 
es una tendencia creciente y los grandes monitores 
de pantalla plana son muy populares. 
embargo,  los  monitores  de  pantal a  plana  no  se 
han instalado siempre en los soportes adecuados o 
instalado de acuerdo con las recomendaciones de 
fabricante. 
-  Los  monitores  de  pantalla  plana  que  se  han 
instalado inadecuadament en tocadores, estanterías, 
estantes, escritorios, oradores, baúle s o carros se 
pueden caer y causar el daño corporal. 

Montaje de Pared: SI USTED DECIDE A MONTAR SU MONITOR DE PANTALLA PLANA LA PARED, SIEMPRE
-  Use  una  montura  que  se  ha  recomendadop  or  el  fabricante  de  monitor  y/o  listado  por  un  laboratorio 
independiente(como U L, CSA, ETL).
- Siga todas las instrucciones ofrecidas por eI fabricante de monitor y montaje de pared.
- Si usted tiene cualquier duda sobre su habilidad para instalar seguramente su monitor de pantal a plana, 
contacte a su distribuidor para la instalación profesional.
- Compruebe que la pared adonde se está montando el monitor es adecuada. Algunos montajes de la pared 
no son diseñados para ser montados a paredes con tachones de acero o la vieja construcción de bloque de 
ceniza. Si usted está inseguro, contacte a un instalador profesional.
- Por lo menos dos personas se requieren para la instalación. Los monitores de pantal a plana puede ser pesados.

¡Al Fabricante le Importa
-  La  industria  electrónica  del  consumidor  está 
comprometida a hacer el entretenimiento de casa 
agradable y seguro.

Ajustar Hasta Seguridad
-  Un tamaño fijo NO es adecuado para todos. siga las 
recomendaciones de fabricante para la instalación segura y 
el uso de su monitor de pantalla plana
-  Lea  con  cuidado  y  entienda  todas  las  instrucciones 
adjuntas para el uso propio de este producto.
- No permita a los niños a subir al equipo o jugar con 
muebles y televisiones.
- No cloque los monitores de pantalla plana en el mueble 
quese puede usar fácilmente como escalón, así como una 
cómoda.
- Recuerde que los niños pueden l egar a ser excitados al ver 
una programación, especialmente en el monitor de pantal a 
plana  "más grande que vida". El cuidado se tiene que 
empezar por poner o instalar el moniotr donde no se puede 
empujar, detener al castado del camino ni echar abajo.
- El cuidado se tiene que empezar por encaminar todos 
los cordones y cables conectados al monitor de pantalla 
plana para que no se puedan tirar o agarrar conectados 
al monitor de pantalla plana para que no se pueden tirar o 
agarrar por los niños curiosos.

!

SEGURIDAD 

DE NIÑOS:

El Cómo y Doónde Usted usar Su 

Monitor de Panntalla Plana  

Marca La Diferrencia

FCC Notice

Guía de seguridad para niños

Fcc Information

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC 
rules.
These limits are designed to provide reasonable protection against 
harmful interference in a residential instal ation. 
This  equipment  generates,  uses  and  can  radiate  radio 
frequency energy and, if not instal ed and used in accordance 
with the instructions, may ca use harmful interference to radio 
Communications. 
However, there is no Guarantee that interference wil  not occur in a 
particular instal ation. 

If  this  equipment  does  cause  harmful  interference  to  radio  or 
television  reception,  which  can  be  determined  by  turning  the 

equipment of  and on, the user is encouraged to try to correct the 
interference by one or more of the fol owing measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from 

that   

to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for 

help.

Device complies with FDA radiation performance standards, 21 

CFR subchapter.

Caution: (Invisible) Laser Radiation when open. 

Do not stare into beam.

Choose Your Connections

TV LED42C45RQ supports various connections to other devices
(such as DVD, VCR, Set-top box, etc.). Please fol ow the table to 
choose the cables which adapt to your device.

Note:  HDMI,  the  HDMI  logo,  and  High-Definition  Multimedia 
Interface  are  trademarks  or  registered  trademarks  of  HDMI 
Licensing LLC

Caution: Unplug the AC cord when you connect other devices to
TV. 

Connecting AV Composite device

(Good Video Quality)

Composite connector wil  be shared with Component Y connector.
To connect a composite AV device, such as a DVD player, fol ow 
these steps:

1.Connect the COMPOSITE jack on the side of TV to the video 
output jacks of device via video cable (yel ow).

2.Connect the L-AUDIO-R jacks on the side of TV to the audio
output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right 
channel jack and plugs are red.

Note: AV signal belongs to composite video. This kind of video 
signal has regular good display quality.

Composite Video Connection

The  picture  below  is  an  example  of  a  connection  using  the 
composite video jack.

The first step in connecting your TV is obtaining the signal. Your 
TV LED42C45RQ has a back panel, which al ows you to receive 
analog and/or digital television channels via ANT/CABLE jack. 
Before connecting your TV, determine using an antenna or a cable 
service to obtain the signal.

A. Antenna
Connect the antenna to TV via coaxial cable on ANT/CABLE jack 
of the back panel. You are ready to receive air local digital and 
analog channels.

B. Cable TV service
Connect the cable TV wal  jack to TV via coaxial cable on
ANT/CABLE jack of the back panel. You are ready to receive off-air 
local digital and analog channels.

C. Set-Top Box
If you use a set-top box, you may need to cal  your cable company 
or satel ite service provider, which use a special connection, please 
refer to the user’s guide of set-top box.

1. Read these instructions.
2. Keep these instructions.
3. Heed al  warnings.
4. Fol ow al  instructions.
5. Do not use this apparatus near water. For example, do not use 
near a laundry tub, in a wet basement, or near a swimming pool, 
and the like.    

6. Clean only with dry cloth. 

7. Do not block any ventilation openings. Instal  in accordance with 
the manufacturer’s instructions. Slots and openings in the cabinet 
back  or bottom are provided for ventilation, to ensure reliable 
operation of the TV and to protect it from overheating. These 
openings must not be blocked or covered. The openings should 
never be blocked by placing the TV on a bed, sofa, rug, or other 
similar surface. 

8. Do not instal  near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) that 
produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the 
other. A grounding-type plug has two blades and a third grounding 
prong. The wide blade or the third prong is provided for your 
safety. If the provided plug does not fit into your outlet, consult an 
electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the point where 
they exit from the apparatus.

11.  Only  use  attachments/accessories  specified  by  the 

manufacturer.

12. Use only with cart, stand, tripod, bracket, or table specified by 
the  manufacturer, or sold with the apparatus. 
When a  cart is used, use caution when moving the cart/apparatus 
combination to avoid injury from tip-over. 
A TV and cart combination should be moved with care. Quick 
stops, excessive force, and uneven surfaces may cause the TV and 
cart combination to overturn.

13. Unplug this apparatus during lightning storms or when unused 
for long periods of time. 
For added protection for this TV receiver during a lightning storm, 
or when it is left unused for long periods of time, unplug it from the 
wal  outlet and disconnect antenna or cable system. 
This wil  prevent damage to the TV due to lightning and power line 
surges.

14. Refer al  servicing to qualified service personnel. Servicing is 
required when the apparatus has been damaged in any way, such 
as power-supply cord or plug is damaged, liquid has been spil ed 
or objects have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normal y, or has 
been dropped.

15. This TV should be operated only from the type of power supply 
indicated on the rating label. 
If customer is not sure the type of power supply in your home, 
consult your appliance dealer or local power company. For TV 
remote control battery power, refer to the operating instructions.

16. The TV set shal  not be exposed to dripping or splashing. No 
objects fil ed with liquids, such as vases, shal  be placed on the TV set.

HEAD PHONE: Connect a 3.5mm headphone for personal audio.
USB: Connect your USB storage device to enjoy music/photo files 

on your TV. (Also used for service purpose).

COMPONENT Y/Pb/Pr: Connect a device that has component 

video jacks, such as a DVD player. To access device connected 

to the Y/Pb/Pr jack, press the INPUT button on your remote; then 

press the up/down arrow to select Component. Press the OK 
button at last to confirm. 

Y/Pb/Pr (Component Video): They provide good picture quality 

because the video signal is separated into three components. Use 

three video-grade or component video cables for the connection. 

When using Y/Pb/Pr, make sure you connect left and right audio 

cables to the AUDIO IN R/L jacks.
L-AUDIO-R,  COMPOSITE:  Connect  an  AV  device  that  has 

composite video jacks, such as a VCR or a DVD player. To access 

device connected to these jacks, press the INPUT button on your 

remote; then press the up/down arrow to select AV. Press the 

OK button at last to confirm.

AUDIO  IN  L:  Left audio channel connection. The left audio 

connector is usual y white. For mono audio sources, be sure to 
use the left AUDIO INPUT.

AUDIO IN R: Right audio channel connection. The right audio 

connector is usual y red.
ANT/CABLE: Connect to receive the signal from your antenna or 

cable via coaxial cable.
Digital  Audio  out: Connect a coaxial cable for digital audio 

output.

Connecting HDMI device (Best Video Quality)
To connect a HDMI device, such as a DVD player, please Connect 

the HDMI1/DVI/MHL, 2/ARC jack on the side of TV to the output

jacks of  device via HDMI cable.

To connect a DVI device, via DVI port of PC or Device and HDMI 

jack of TV:

Front Panel

Power/Standby Indicator: Light up in red when the TV is in 

standby mode. Light out when the TV is on. 
Remote  Control  Sensor: Remote  control  IR  sensor, which 

receives infrared ray sent by remote control.
Codes for Cox Communications: 0178
Codes for Comcast: 10178
Codes for Dish Network: 627
Codes for Fios Verizon: 0205, 0057, 0493, 0775

Keypad Buttons
If you cannot locate your remote, you can use the keypad buttons 
on your TV to operate many TV features. 

Connecting YPbPr Component device
(Better Video Quality)
To connect a component device, such as a DVD player, fol ow 

these steps:

1.Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV to 

the video output jacks of device via video cable (green, blue and 

red).
2.Connect the L-AUDIO-R jacks on the side of TV to the audio

output jacks of device via audio cable.

Notice the left channel jack and plugs are white and the right 
channel jack and plugs are red.
Note: Y/Pb/Pr jacks are component video. This kind of video signal 
has better display quality.
Component Video Connection

The picture below is an example of a connection using the component 

video jack.

17. Never push objects of any kind into this TV through openings 
as they may touch dangerous voltage or other electrical parts that 
could result in fire or electric shock. Never spil  liquid of any kind into 
the TV.

18. Unplug the TV from the wal  outlet before cleaning. Do not use 
liquid or aero cleaners. Use a damp cloth for cleaning.

19. This TV should never be placed near or over a radiator or heat 
resource. This TV should not be placed in a built-in instal ation such 
as a bookcase or rack unless proper ventilation is provided or the 
manufacturer's instructions have been adhered to.

20. Do not place this TV on an unstable cart, stand, tripod, bracket, 
or table. The TV may fal , causing serious injury to someone, and 
serious damage to the appliance.

21. Do not attempt to service this TV by yourself because opening 
or removing covers may expose you to dangerous high voltage or 
other hazards. Refer al  servicing to qualified service personnel.

22. This device complies with Part 15 of the FCC Rules. Operation 
is subject to the fol owing two conditions: (1) this device may 
not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause 
undesired operation.

23. WARNING: To prevent injury, this apparatus must be securely 
attached  to  the  floor/wal   in  accordance  with  the  instal ation 
instructions.

24. To reduce the risk of electric shock, the grounding of center pin 
of plug must be maintained.

25. If an outside antenna or cable system is connected to the TV, 
be sure the antenna or cable system is grounded to provide some 
protection against voltage surges and built-up static charges. 
Section 810 of the National Electrical Code, ANSI/NFPA NO.70, 
provides information with respect to proper grounding of the mast 
and supporting structure,  grounding of the  lead-in wire  to an 
antenna discharge unit, size of grounding conductors, location of 
antenna discharge unit, connection to grounding electrodes, and 
requirements for the grounding electrodes. (See figure A)

5

4

5 6

6 7

Safety Strap

Caution: Pushing, pul ing or climbing on the TV may cause the TV 
fal ing. Do not let children climb or hang on the TV. Always place the 
TV on a sturdy, level, stable surface that can hold the weight of TV. 
And if possible, secure the TV according to the instruction below 
(Note: The fastening components such as screws are not supplied 
with TV).

Step one: Insert the M6 mounting screws into the upper two wal  
mounting screw holes and fasten them (Figure B).
Step two: Insert anchors to wal  and connect the bolts and anchors 
with ropes or chains (Figure C).

Before Turning On TV

Check Accessories
Check the accessories that are packed with your TV.
(refer to Quick Start Guide)

Setup TV Table Stand
Please refer to Quick Start Guide to carry out stand instal ing.

Select TV Location
Select a flat, stable table to place your TV set. Please follow the 
safety instructions when placing the TV.

Connection and Using
After placing your TV properly, you can connect the TV with power 
supply and cable components. For further information, see page 5 
to page 6.

1. Connect the HDMI1/DVI/MHL jack on the side of TV to the DVI  
port of PC via HDMI-DVI cable.
2. Connect the L-AUDIO-R jack on the side of TV to the audio
output jack of computer with audio cable (dual-channel RCA jacks 
to 3.5mm stereo jack or the L-AUDIO-R jack).

Note: 1. HDMI (High-Definition Multimedia Interface) is a compact 

audio/video interface for transmitting uncompressed digital data. It 

carries the audio and video signal via the same cable and has the 

best display quality.

2. HDMI-DVI cable transfers only video signal from DVI port of
DVI device to HDMI jack of TV. For audio signal, please connect 
audio output to L-AUDIO-R jack on TV back panel.

HDMI Connection

The picture below is an example of a connection using the HDMI 
video jack.

Turning On and Off

Connect the AC cord to power the LED LCD TV. At this time the 
TV wil  enter standby mode and power indicator wil  turn red. Use 
Power button (   ) on the top panel of TV or on the remote control 
to turn on the TV. After switching of  the TV for 5 seconds, you can 
turn on TV again. 

Choosing TV Channel
Tuning To Analog  Channels 

an analog channel  has  a  channel number beginning with “A”. 
Input the digital number with numeric buttons directly and press  
OK button to confirm. For example, to watch analog channel “A51”, 
press  “5”,  “1”, “OK” on remote control in sequence.  
Note: Although there is no analog TV signal available in America, 
we reserve ATV functions for some expansible use. 
Tuning To Digital Channels 

Selecting Input Source

Press  INPUT  button  on  remote 
control to display Source Select list. 
Use up/down arrows to highlight the 
source you need and press OK to 
confirm.

About remote control 
working distance and 
angle, see the 

start guide.

quick 

Keypad and Front Panel

TV Jacks Explanation

Side Panel Connections

Cable Connections

Preparation for Your New TV

TV Signal Connection

Safety Precautions

Basic Operations

How to Obtain Various Kinds of Input Sources

After connection is done, press INPUT button on remote control 
or TV top panel to choose the input source you need. See page 7, 
Basic Operation of TV.

Displays the Source Select List.
Displays the TV Main Menu.
Scans up through the channel list. 
In the TV menu system, it acts like the up arrow on the
remote control and can be used to select menu options.
Scans down through the channel list. In the TV menu 
system, it acts like the down arrow on the remote 
control and can be used to select menu options.
Increases the volume. In the TV menu system, it acts

like the right arrow on the remote control and can be  
used to select menu options.
Decreases the volume. In the TV menu system, it acts 

like the left arrow on the remote control and can be used 

to select menu options.
Turns the TV on and off.

Note: Do not plug the AC cord until you have accomplished al  the 
connections. This TV does not support QAM under cable channel 
search.   

To connect an ARC HDMI OUT device, please connect to the HDMI 
input port of the device such as amplifier,

HDMI IN

HDMI1/DVI, 2:  (High-Definition Multimedia Interface) It provides an 

uncompressed digital connection that carries both video and audio 

data by way of an integrated mini-plug cable.

MHL: (Mobile High-Definition Link) To standard HDMI input, transmit 

the video/audio from portable electronic device (cel phone,digital

camera, digital-video camera) to TV set.

ARC: (Audio Return Channel)Adopted in TV output of digital audio, can 

be connected to the device supporting ARC, transmit the TV sound to the 
device.

USB

Move

Select

OK

Remote Control Sensor

Power/Standby Indicator

6

6

08

08

11

13

09

08

12

14

09

08

14

10

10

      Picture Menu

      Adjust the OSD Screen

Frequently Asked Questions (FAQs)

      Audio Menu

      Quick Menu

Troubleshooting

      Time Menu

      Channel Menu

      Setup Menu

      Lock Menu

Warranty Card

Wall Mounting Unit Specification

USB Media Play

Product Specification

13

A digital channel has a channel number beginning with “D”. Input 
the main digital number with numeric buttons directly, then press  
“-” button on remote control, and input the sub number at last. 
For example, to watch analog channel “D31-1”, press “3”, “1”, “-”, 
“1”, “OK” on remote control in sequence. 
Changing Channels Directly You can use CH   button to increase 
channel number and CH    to decrease channel number. 
When no OSD (On Screen Display) is used, the up/down arrows 
can also work as CH   /CH    buttons.

0.719980s