RCA 40-5023 User's Manual

RCA Speakers User's Manual - 40-5023.
Download
Page  of 8
4.1, 1880 votes
background image

6

60

0

0---W

W

Wa

a

atttt 

t P

P

Po

o

ow

w

we

e

errre

e

ed 

d S

S

Su

u

ub

b

bw

w

woo

ooffe

e

err

Your RCA PRO-SW60P 60-Watt Powered 
Subwoofer is designed to give you the best 
possible low frequency sound quality for 
the ultimate home theater experience. You 
will be astonished by the realism it adds to 
movie sound effects and the power it lends 
to all kinds of music.

The subwoofer combines the power of a 
built-in 60-watt RMS amplifier with a 
responsive, 8-inch paper cone woofer — 
all housed in a tuned-port bass-reflex 
enclosure to produce tight, floor-
rumbling, powerful bass (down to 50 Hz) 
that you can feel as well as hear! The 
POWER

 indicator lets you see at a glance 

when the subwoofer is operating.

Your subwoofer has an adjustable high cut 
filter and high and low level inputs, 
making it easy to incorporate into existing 
systems, or you can use it as an integral 
part of a subwoofer/satellite combination.

It also has these features:

Auto On/Off — automatically switches 
the PRO-SW60P’s amplifier to standby if 
the subwoofer does not receive a signal for 
about 11 minutes.

Standby Indicator — lights when the 
subwoofer is connected to power but not 
receiving a signal.

High Level Input — lets you connect the 
subwoofer to an amplifier’s or receiver’s 
speaker outputs.

Note: You need speaker wire (not 
supplied, available at your local 
RadioShack store) to connect the 
subwoofer to an amplifier or receiver’s 
speaker outputs.

Low Level Input — lets you connect the 
subwoofer to an amplifier’s or receiver’s 
subwoofer out or pre out jacks. These 
inputs automatically sum left and right 
channel information.

Note: You need phono cables (not 
supplied, available at your local 
RadioShack store) to connect the 
subwoofer to an amplifier or receiver’s 
subwoofer out or pre out jacks.

Volume Control — lets you match the 
PRO-SW60P’s output level to your satellite 
speakers’ output (if used). 

Frequency HZ — controls the high 
frequency cutoff point. Rotated fully 
clockwise, it cuts high frequencies over 
200 Hz. Rotated fully counterclockwise, it 
cuts high frequencies over 50 Hz.

40-5023.fm  Page 1  Thursday, November 4, 1999  1:44 PM

0.498086s