Radio Shack 49-1010 User's Manual

Radio Shack Washers User's Manual - 49-1010.
Download
Page  of 2
4.5, 2369 votes
background image

doorstop alarm 

 

       keychain alarm

window alarm          UV proof window decals (2) 
                             double-sided adhesive tape (1)

Please read this user’s guide before 

installing, setting up and using your new product

www.radioshack.com

Thank you for purchasing your Campus 
Security Kit from RadioShack.

what’s included

49-1010

Campus Security Kit

using your doorstop alarm

using your window alarm

1.  Remove battery  
     compartment     
     cover, and insert    
     one 9V battery (not  
     supplied) as             
     shown. Slide  
     ON/OFF to ON.

2.  Insert the alarm         

at the base of your 
door, making sure 
the non-skid pad 
on the bottom 
of the alarm is in 
firm contact with 
the floor. When the door is opened, 
the  alarm’s metal plate is depressed, 
which presses down the trigger 
anchor and sounds the alarm. 

3. To silence the doorstop alarm, turn it 

OFF

4.  Press down on the metal wedge so  

that it is positioned where it will 
depress the trigger anchor.

The door stop alarm is for indoor use only.

doorstop alarm

window 

keychain alarm with light

alarm

UV proof window decals (2)

Your window alarm comes with four LR44 
button-cell batteries installed. Before use, 
test the batteries as follows:

1. Slide to Lo or Hi.

2. Push this button. If  

the red LED lights, 
the batteries are 
good. If the LED does 
not light, replace the 

trigger anchor

ON/OFF

double-sided 

adhesive tape (1) 

3. Slide off the battery 

cover to replace the  
batteries.

Mounting your Alarm

1. Mount your window alarm indoors, on 

a window pane. 

2. Apply the supplied adhesive tape onto 

a window pane, with the side labeled 
“ACTIVE” facing outside for external 
visibility. Then, firmly press the window 
alarm onto the adhesive tape.

3. Slide to Hi or Lo to arm. Hi provides 

more sensitivity for a larger area; Lo is 
suitable for use in a smaller area.

4. Apply the UV proof window decal on 

the window. 

5. Slide to OFF to disarm the unit.

0.567686s