Radio Shack 15-133 User's Manual | Page 8

Radio Shack Universal Remote User's Manual - 15-133.
Download
Page  of 52
4.3, 2196 votes
background image

You can assign any device key to work with 
any available device.  For example, if you want 
to use AUD to control a second TV, simply 
follow the same steps listed in “Programming 
a Device
” using the codes listed in 
Manufacturers Codes” for your TV.
Searching for a Code
If your device does not respond to the remote 
after trying all codes listed for your brand or if 
your brand is not listed, try searching for your 
code.
Use the following device code digits to control 
a specific device:

Code Digit Device

0

Cable / Satellite

1

TV

2

DVD, VCR, DVR/PVR

3

Audio, Misc Audio

1. Turn on your device and, if needed, load 

media (for example, a DVD).

2. On the remote control, press a device key 

(TV, CBL/SAT, DVD, VCR or AUD) once; 
it blinks once. Then press and hold P until 
the LED blinks twice.

3. Enter 9 9 1. The LED blinks twice.
4. Press the code digit for your device. The 

device key blinks twice. Aim the remote 
control at the device and press Power 
once.

5. Press and release the CH+ key 

continuously, then stop when the device 
turns off.

The remote is sending IR codes from its 
extensive library to the selected device, 
starting with the most popular code 
first.

6. Press Power. The device should turn on, 

then press P to lock in the code.

If the device does not turn on during step 
6, slowly press and release CH- to go back 
through the codes, press and release P when 
the device turns on.

Related Manuals for Radio Shack 15-133

0.503356s