Radio Shack 15-124 User's Manual

Radio Shack Stereo Receiver User's Manual - 15-124.
Download
Page  of 1
4.8, 1559 votes
background image

Your receiver works with the transmitter of your 

2.4 GHz USB Connection Digital Audio Link. 

Refer to the user’s guide of your 2.4 GHz USB 

Connection Digital Audio Link before using your 

receiver.

•  To avoid injury, do not connect the provided 

power adapter to a ceiling outlet. 

•  Use only an adapter that supplies 9V DC and 

delivers at least 200mA. Its center tip must be 

set to positive.

•  Unplug the AC adapter from the AC outlet 

before unplugging from the receiver.

•  For better performance and greater reception 

range, keep the receiver and transmitter away 

from wireless LAN access points, microwave 

ovens, and wireless networks or phones that 

run on 2.4 GHz frequency.

15-124

2.4 GHz Digital Audio Receiver

Thank you for purchasing your 2.4 GHz Digital 

Audio Receiver from 

RadioShack. This add-on 

receiver is designed for use with your 2.4 GHz USB 

Connection Digital Audio Link. 

Power indicator
Lights when your 

transmitter (not supplied) 

and receiver link.

Receiver  

AC Adapter 

3.5mm Stereo Y-Type Patch Cable 

3.5mm Stereo Audio Cable 

User’s Guide

Frequency Range ...................................................2.4 ~ 2.4835 GHz

Channel Frequency ..................................... 2410, 2419 ~ 2473 MHz

Channel Spacing ...................................................................... 9 MHz

Frequency Stability ............................................................... ±1 MHz

Transmission Range ........................45 ft (15 m, in the home) (Max.)

 .................................................... 100 ft (30.5 m, line of sight) (Max.)

Operating Temperature ........................... 32°F to 104°F (0°C to 40°C)

Power Supply ...................................... 120VAC/60Hz, 9V DC/200mA

Response ................................................................ 20 ~ 20kHz±3dB

S/N Ratio ...........................................................................40dB (Min.)

Sensitivity ................................................................. −85 dBm (Min.)

Output Impedance ........................................... >10K Ohm (3.5 mm)

Output Level ...................................................................2 Vms±10%

Dimensions (H x W x D) .......................................3.4 x 3.4 x 1.3 Inch 

 ...............................................................................(86 x 86 x 32 mm)

Weight ............................................................................2.29 oz (65 g)
Specifications are subject to change and improvement without 

notice. Actual product may vary from the images found in this 

document.

Notes

This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to part 15 

of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and 

can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful 

interference to radio communications.
However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or 

more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and 

receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

Consult your local 

RadioShack store or an experienced 

radio/TV technician for help. If you cannot eliminate the 

interference, the FCC requires that you stop using your 

receiver. Changes or modifications not expressly approved 

by 

RadioShack may cause interference and void the user’s 

authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation 

is subject to the following two conditions: (1) this device 

may not cause harmful interference, and (2) this device must 

accept any interference received, including interference that 

may cause undesired operation.

Product

2.4 GHz 

 Digital Audio Receiver

Model

15-124

Responsible 

Party

RadioShack  

300 RadioShack Circle 
 Fort Worth,TX 76102

Phone

817-415-3200

This product is warranted by 

RadioShack against manufacturing defects 

in material and workmanship under normal use for ninety (90) days from the 

date of purchase from 

RadioShack company-owned stores and authorized 

RadioShack franchisees and dealers. For complete warranty details and 

exclusions, check with your local 

RadioShack store.

RadioShack Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102   

04/04

Please read this user’s guide before 

installing, setting up, and using your new receiver.

www.radioshack.com

©2007. 

RadioShack Corporation. 

Al  rights reserved. 

RadioShack and 

RadioShack.com are trademarks 

used by 

RadioShack Corporation.

15-124

02A07 

Printed in China 

what’s included

specifications

rf emissions information

limited 90-day warranty

using your receiver

Connect the 3.5mm stereo 

Y-type cable or 3.5mm stereo 

audio cable, then connect the 

other end to your stereo’s 

audio input jacks.

Connect the 9V AC 

adapter, then plug 

the other end into a 

standard AC outlet. 

0.612477s