Pioneer Super Tuner III D DEH-P4550 Operation Manual | Page 9

Pioneer CD Player Operation Manual - Super Tuner III D DEH-P4550.
Download
Page  of 116
4.4, 2397 votes
background image

Listening to the radio

3

1

2

5

4

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

Important

If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step on page 31).

1 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

2 Preset number indicator

Shows what preset has been selected.

3 Frequency indicator

Shows to which frequency the tuner is

tuned.

4 Signal level indicator

Shows the radio wave strength.

5 Band indicator

Shows which band the radio is tuned to, AM

or FM.

1 Press SOURCE to select the tuner.

Press SOURCE until you see TUNER dis-

played.

2 Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

3 Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1, F2, F3 for FM or AM.

4 To performmanual tuning, press c or

d with quick presses.

The frequencies move up or down step by

step.

5 To performseek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pressing either
c or d with a quick press.
# If you press and hold c or d you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.

Note

When the frequency selected is being broadcast
in stereo the stereo (5) indicator will light.

Tuner

En

9

English

Section

04

HHHHHHHHHHHHHH

 

0.502921s