Philips 3121 233 42852 User's Manual

Philips Barcode Reader User's Manual - 3121 233 42852.
Download
Page  of 4
4.1, 2472 votes
background image

3121 233 42852

Quick Use and Setup Guide

BASIC TV CONNECTIONS

75 

L

AUDIO

R

AV out

2

1

CVI

AV in

Important Notice/Warning . . . . . . . . . . . . . . . . . . . . .1

Making Basic TV Connections

Basic Cable TV Connections  . . . . . . . . . . . . . . . . . .1

Basic Antenna TV Connections  . . . . . . . . . . . . . . . .1

Basic TV Operation . . . . . . . . . . . . . . . . . . . . . . . . . .2

Remote Battery Installation  . . . . . . . . . . . . . . . . . . .2

Remote Control Button Descriptions  . . . . . . . . . . . .2

How to Use the Installation Features . . . . . . . . . . .3-4

Using the Onscreen menu  . . . . . . . . . . . . . . . . . . . . .3

Using the Language Control  . . . . . . . . . . . . . . . . . . .3

Setting the Tuner Mode Control  . . . . . . . . . . . . . . . .3

How to Automatically Program Channels  . . . . . . . . .3

How to Add and Delete Channels  . . . . . . . . . . . . . . .4

Glossary of Terms  . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

IMPORTANT

NOTE: This owner's manual is used with several

different television models.  Not all features (and
drawings) discussed in this manual will necessar-
ily match those found with your television set.
This is normal and does not require that you con-
tact your dealer or request service.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.

Color TV

CONTENTS

Your Cable TV input into your home may be a single (75 ohm)

cable or a converter box installation. In either case, the con-

nection to the TV is very easy. Follow the steps below to connect
your cable signal to your new television.

If your cable signal comes directly from a round 75

Ω coaxial

cable use the following steps:

1 Connect the open end of the round Cable Company sup-

plied cable to the 75

Ω input on the TV. Screw it down finger

tight.

2 Plug the television in to the wall outletand turn the TVon.

Refer to the AUTO PROGRAM feature to program all the
available channels on your cable signal.

If your cable signal comes from a cable box, use the following
steps:

3 Connect the open end of the round Cable Company sup-

plied cable to the cable signal IN(put) plug on the back of
the Cable Box.

Using a separate round coaxial cable, connect one end to the

OUT(put) plug on the back of the Cable Box.

5 Connect the otherend of the round coaxial cableto the

75

Ω input on the back of the television. Screw it down finger

tight.

6 Plug the television in to the wall outletand turn the TVon.

Refer to the TUNER and AUTO PROGRAM features on
page 3 of this Quick Use Guide. TUNER should be set to the
CABLE option. AUTO PROGRAM can be set to program all
the available channels on your cable signal into the televi-
sion’s memory.

CABLE TV

75 

L

AUDIO

R

AV out

CVI

AV in

OUTPUT

INPUT

5

6

3

4

Direct Cable Connection:

Cable Box Connection:

Cable signal 

coming from 

Cable Company

(Round 75

coaxial cable)

Jack Panel Back of TV

AC Power 

Wall Outlet

Power Plug

from back of TV

Jack Panel Back 

of Cable Box

Cable Signal IN from

the Cable Company

Round 75

Coaxial Cable

Jack Panel Back of TV

AC Power 

Wall Outlet

Power Plug

from back of TV

Acombination antenna receives normal broadcast chan-

nels (VHF 2–13 and UHF 14–69). Your connection is

easy because there is only one 75

Ω (ohm) antenna plug on

the back of  your TV, and that’s where the antenna goes. 

1 If yourantenna has a round cable(75 ohm) on the end,

then you're ready to connect it to the TV.
If your antenna has flat, twin-lead wire (300 ohm), you
first need to attach the antenna wires to the screws on a
300- to 75-ohm adapter.

2 Push the round endof the adapter (or antenna) onto the

75

Ω (ohm) plug on the back of the TV.  If the round end of

the antenna wire is threaded, screw it down finger tight.

3 Plug the television in to the wall outletand turn the TV

on. Refer to the TUNER and AUTO PROGRAM features on
page 3 of this Quick Use Guide. TUNER should be set to the
ANTENNA option. AUTO PROGRAM can be set to program
all the available channels on your cable signal into the televi-
sion’s memory.

ANTENNA TV

75 

L

AUDIO

R

AV out

CVI

AV in

1

3

2

Antenna Connection:

Jack Panel Back of TV

Power Plug

from back of TV

AC Power 

Wall Outlet

Round 75

Coaxial Cable 

from Antenna

Twin

Lead Wire

300 to 75-ohm

Adapter

Outdoor or Indoor Antenna

(Combination VHF/UHF)

The combination antenna receives normal 

broadcast channels 2-13 (VHF) and 14-69 (UHF).

NOTE: If your cable box uses
separate Audio Outputs, the
connection will have to be
made at the TV’s Audio L & R
AV in jacks.

Related Manuals for Philips 3121 233 42852

0.587869s