Philips 27PC4326/37 Quick Start Manual

Philips Televisions Quick Start Manual - 27PC4326/37.
Download
Page  of 2
4.4, 1042 votes
background image

ANT.

AUDIO OUT

COAXIAL

IN

OUT

OR

3

CABLE BOX

CABLE TV  SIGNAL

RF COAXIAL
CABLE

ANT.

4

ANT.

ANTENNA or 
CABLE TV  SIGNAL

2

1 Disconnect all equipment from the power outlets.Connect the equipment to the power outlets only after you

have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.

2 If you do not have a Cable Box,simply connect your Antenna or Cable TV signal directly to the ANT.(enna)

jack on the rear of the TV/VCR/DVD.

3 If you do have a Cable Box or Satellite Receiver,first connect the Cable TV or Satellite signal to the IN jack

on the Cable Box or Satellite Receiver. Then, use an RF coaxial cable (not supplied) to connect the OUT
jack of the Cable Box or Satellite Receiver to the ANT. (enna) jack on the TV/VCR/DVD. 
To view any channel,
set the TV/VCR/DVD to the output channel of the Cable Box or Satellite Receiver (channel 3 or 4). Then, select channels at
the Cable Box or Satellite Receiver.

4 When all connections are complete,plug the power cord of the TV/VCR/DVD into an active power

outlet.

5 Press STANDBY-ONyon the TV/VCR/DVD or its remote to turn on the unit.

There are many ways to connect your new TV/VCR/DVD to your other equipment. This Quick Start Guide
shows the easiest, most common connections for the TV/VCR/DVD.

27PC4326

Printed in Malaysia

8239 300 4744

1

1EMN21841

T3

221UB*****

T3221UB_QSG_EN  5/8/06  7:18 PM  Page 1

Also See for Philips 27PC4326/37

0.515716s