Philips 20PF7835/37 Quick Start Manual

Philips Televisions Quick Start Manual - 20PF7835/37.
Download
Page  of 4
4.8, 1549 votes
background image

Quick Use and Hookup Guide

Important Notice/Warning . . . . . . . . . . . . . . . . . . . . .1

Basic TV Operation . . . . . . . . . . . . . . . . . . . . . . . . . .1

Remote Battery Installation  . . . . . . . . . . . . . . . . . . .1

Remote Control Button Descriptions  . . . . . . . . . . . .1

Hooking up the Television

Basic Cable/Cable Box TV Connections  . . . . . . . . .2

Basic Antenna TV Connections  . . . . . . . . . . . . . . . .2

AV1 Input Connections  . . . . . . . . . . . . . . . . . . . . . .3

Component Video Input Connections  . . . . . . . . . . .3

Side AV Inputs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

S-Video (Side) AV Inputs . . . . . . . . . . . . . . . . . . . . .4 

Headphone and Data Jack  . . . . . . . . . . . . . . . . . . . .4

IMPORTANT

NOTE: This owner's manual is used with several

different television models.  Not all features (and
drawings) discussed in this manual will necessarily
match those found with your television set. This is
normal and does not require that you contact your
dealer or request service.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.

LCD TV

LCD TV

CONTENTS

BASIC LCD TV AND REMOTE OPERATION

This LCD television has a set of controls located on the top of

the cabinet for use when the remote control is not needed. 

1 Press the POWER button on the front of the TVcabinet to

turn the TV ON. 

Note: With AutoChron ON, the TV will search for a PBS chan-

nel to set the clock before powering itself on. This can take a
few seconds.

2 Press the VOLUME + button to increase the sound level or

the VOLUME – button to lower the sound level. 

Pressing both buttons at the same time will display the

onscreen menu. After you are in the menu, use these buttons to
make adjustments or selections.

3 Press the CHANNEL or buttonto select TVchannels.

Use these buttons to make adjustments or selections in the
onscreen menu.

There is also a set of Audio and Video Input jacks located on both sides
and the bottom of the television cabinet. Refer to the Audio/Video
Hookup sections within this Guide.

LCD TELEVISION

2

75 

DC in (24V)

DC in (12V)

DC in (24V)

1

3

Remote 
Sensor 
Window

Volume and Channel buttons are located
on the top of the television cabinet.

To load the supplied batteries into the remote:
1 Remove the battery compartment dooron the back of the

remote. 

2 Place the batteries (2-AA) in the remote. Be sure the (+) and

(–) ends of the batteries line up correctly (the inside of the case
is marked).

3 Reattach the battery compartment door.

REMOTE CONTROL BATTERIES

Remote Control 

(shown from the bottom)

Battery Compartment Door

2 “AA” Batteries

Battery Compartment

REMOTE CONTROL BUTTONS

Be sure to point the remote at the
Remote Sensor window on the
front of the television when using
the remote control to operate the
television.

DC Input located on the

bottom jack panel of the TV

(12V for 15” Model)
(24V for 20” Model)

Power Cord and Adapter

Sleep Button - Press to set the TV to automatically turn itself OFF at
a given amount of time.

Status/Exit Button - Press to see the current channel number on the
TV screen. Also press to clear the TV screen after control adjust-
ments.

Radio (Mode) Button - Press to directly enter the specific FM Radio
mode.

CC Button - Press to select Closed Captioning options within the
menu. (See the Directions for Use manual for details.)

Auto Sound Button - Press to select an AutoSound™ control.
Choose from three factory-set controls (VOICE, MUSIC, and THE-
ATRE) and a PERSONAL to tailor the TV sound to enhance the par-
ticular type of program you are watching.

Source Button - Press repeatedly to select the different signal
sources connected to the TV: TV (current channel), AV1, CVI, Side
and S-video.

Menu Button - Press for the onscreen menu to appear. Pressing the
menu button after menu selections are made will eliminate the menu
from the display.

Cursor Buttons (Left, Right, Up, Down) - Press these buttons to
highlight, select, and adjust items on the TV's onscreen menu.

Volume (+) or (–) Buttons - Press to adjust the TV sound level.

Mute Button - Press to turn the TV sound OFF. Press again to return
the sound to its previous level.

Surf Button - Press to select previously viewed channels. You can
place up to 10 channels in memory. Then by pressing the SURF but-
ton you can quickly view the select channels. (See the “Using the
Channel Surf Control” section in your Directions for Use manual to
see how to select a series of channels using the Surf button.)

Power Button - Press to turn the TV ON and OFF.

Program List Button - Press to display a list of channel numbers
and their names. Each channel will appear as a selectable menu item.
Refer to the Program List section within the Directions for Use man-
ual supplied with the TV for detailed instructions.

Format Button - Press to toggle the different screen format options.

A/CH Button - Press to toggle between the currently viewed channel
and the previously viewed channel.

TV (Mode) Button - Press to directly enter the specific TV mode.

Auto Picture Button - Press to select an AutoPicture™ control.
Choose from four factory-set controls (MOVIES, SPORTS, WEAK
SIGNAL, and MULTI MEDIA) and a PERSONAL control that you
set according to your own preferences through the onscreen PIC-
TURE menu. The four factory-set controls will tailor the TV picture
so as to enhance the particular type of program you are watching, or
to improve the picture of a program that has a weak signal.

Surr. Sound Button - Press to set various factory Incredible
Surround Sound listening modes. (Refer to the Incredible Surround
section within the Directions for Use for detailed instructions.)

Channel (+) or (–) Buttons - Press to change the tuned channel.

Number Buttons - Press the number buttons to select TV channels.
When selecting single-digit channels, press the number of the desired
channel. The TV will pause for a few seconds and then tune to the
selected channel. (Note:  You can press 0, then the number also.) For
channels 100 and above, first press then the next two numbers of
the desired channel.

Clock Button - Press the CLOCK button to access the onscreen
Clock menu.

Also See for Philips 20PF7835/37

0.530386s