Panasonic TC-P60UT50 Owner's Manual | Page 9

Panasonic Televisions Owner's Manual - TC-P60UT50.
Download
Page  of 27
4.9, 1723 votes
background image

9

Accessories

Assembly screws

          

  XYN4+F10FNK  (Black)

  size (M4 x 10) 
  (for 42”/ 50” (5), for 55”/60” (1))

          

  XYN5+F16FN  (silver)

  size (M5 x 16)
  (for 42”/ 50” (7), for 55”/60” (12))
Bracket (1)

  TBL5ZA3238 (for 42”/50”)
  TBL5ZA3200 (for 55”/60”)

Neck (1)

  TXFBL5Z0069 (for 42”/50”)
  TXFBL5Z0085 (for 55”/60”)

Cover (1)

  TXFBL5Z0071 (for 42”/50”)
  TXFBL5Z0056 (for 55”/60”)

  Cover is in the same bag 

with Owner’s Manual

Base (1)

  TBL5ZX0292 (for 42”)
  TBL5ZX0294 (for 50”)
  TBL5ZX0420 (for 55”)
  TBL5ZX0421 (for 60”)

 Attaching the pedestal to TV

■Assembling the pedestal

 Insert the protrusion of the Neck 

into the Base firmly.

Neck

Protrusion of the 
Neck (bottom)

Front

 Turn the stand over and fix stand neck 

securely with assembly screws. 
(for 42”/50”: 3 screws, for 55”/60”: 4 screws)

•  Do not hold the neck when turning over the stand.

B x 3 pcs. (for 42”/50”)
B x 4 pcs. (for 55”/60”)

Front

Back of Stand

Hole for 
screw

[TC-P42UT50,
TC-P50UT50]

[TC-P55UT50,
TC-P60UT50]

 Attach the Bracket to the protrusion of Neck. 

Make sure that the bracket is anchored 
before fixing the screws.
Fix securely with assembly screws. (4 screws)

B x 4 pcs. 

Bracket

Protrusion of Neck (top)

 Attach the cover and fix securely with 

assembly screw. 

A x 1 pcs.

Cover

■Set-up
 

  Tighten assembly screws 

 (for 42”/50”) / 

 (for 55”/60”) (total 4 screws) 

  loosely 

at 

first,

 then tighten them firmly to fix securely.

Work on a flat surface

A
B

x 4 pcs. (for 42”/50”)
x 4 pcs. (for 55”/60”)

Arrow 
mark

(Image)

Rear side

Hole for pedestal 
installation 

Bracket

 Base 

Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using 
the wall-hanging bracket or repacking the TV. 

  Remove the assembly screws 

 (for 42”/50”) / 

 (for 55”/60”) 

from the TV. 

 Lift the TV from the pedestal.
  Remove the assembly screw 

 from the cover. 

 Pull out the cover. 
 Remove the assembly screws 

 from the Bracket. 

  Remove the assembly screws 

 from the Back of stand and 

pull out the neck.

Warning

Do not disassemble or modify the pedestal.

 

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than that provided with this TV.

 

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

 

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

 

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong 
enough to support the TV, and it might fall over and become damaged, and personal injury may result.

When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)

 

Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.

tc̲p42̲50̲55̲60̲UT50̲eng̲0654.indd   9

2012/03/15   13:55:08

0.487162s