Panasonic KX-TGE260 Quick Start Manual | Page 4

Panasonic Telephone Quick Start Manual - KX-TGE260.
Download
Page  of 10
4.7, 1367 votes
background image

– 4 –

Pairing a Bluetooth cellular phone
1 Handset:

For CELL 1: {MENU}(6241
For CELL 2: {MENU}(6242
L

After the corresponding CELL indicator on the base unit starts flashing, the rest of the 
procedure must be completed within 5 minutes.

2 Your cellular phone:

While the corresponding CELL indicator is flashing, follow the instructions of your cellular 
phone to enter the pairing mode.
L

Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: 
“0000”). If your cellular phone shows PassKey confirmation on its display, follow the 
directions to proceed.

3 Handset:

Wait until a long beep sounds.
L

It may take more than 10 seconds to complete pairing.

L

When the corresponding CELL indicator lights up, the cellular phone is connected to the 
base unit. You are ready to make cellular calls.

{OFF}

Note:
L

Make sure that your cellular phone is set to connect to this product automatically. Refer to your 
cellular phone’s operating instructions.

Base unit: CELL indicators

Status

Meaning

On

A cellular phone is connected. Ready to make/receive cellular 
calls.

Flashing

− The cellular line is in use.

− Phonebook entries are being copied from a cellular phone.

− The base unit is searching for the paired cellular phone.

− The base unit is pairing a cellular phone.

− A cellular call is put on hold.

Flashing rapidly

A cellular call is being received.

Light off

− A cellular phone is not paired to the base unit.

− A cellular phone is not connected to the base unit.

Handset: Link to cell display items

td

A cellular line is in use.*1
L

When flashing: The cellular call is put on hold.

L

When flashing rapidly: A cellular call is being received.

*1 Corresponding cellular line(s) is(are) indicated next to the item.

xd

A cellular phone is connected.*1 Ready to make/receive cellular calls.
L

When turned off: A cellular phone is not connected to the base unit.

*1 Corresponding cellular line(s) is(are) indicated next to the item.

uv

− A cellular call is being done on that line.

− The cellular line is selected for the setting.

Link to cell

TGE26x_27x_QG(en).fm  Page 4  Wednesday, December 11, 2013  9:03 PM

 

0.478482s