Pacific hydrostar 1650 PSI Owner's Manual | Page 9

Pacific hydrostar Washers Owner's Manual - 1650 PSI.
Download
Page  of 20
4.8, 1186 votes
background image

Page 9

For technical questions, please call 1-800-444-3353.

SKU 69488 

        

Sa

FE

ty

Op

ER

ati

O

n

m

aint

Enanc

E

SE

tup

Features
note:
 Familiarize yourself with the location and function of all of the machine’s 

controls before proceeding to setup of the machine.

1. 

this item is equipped with a 

GFci (Ground Fault circuit interruption) plug.  

Read and follow these GFci precautions: 

WaRninG! tO pREVEnt ElEctRic ShOck 

anD DEath: 

test GFci (Ground Fault circuit interrupter) 

before each use as follows:

a. 

FiGuRE a

inDicatOR

RESEt

ButtOn

tESt

ButtOn

make sure the trigger is released and 

plug GFci into power outlet.  press reset 

button.  indicator should turn on.

b. 

press test button.  indicator should turn off.

c. 

press reset button again for use.   

Do not use if above test fails.

the GFci device does not protect 

against electrical shock due to contact 

with both circuit conductors or a fault 

in any wiring supplying this device.
Should replacement of the GFci power 

plug become necessary, only a qualified 

technician should perform the service.
Do not alter or disable the GFci power plug.
to allow the GFci unit to function 

properly, extension cords must not be 

used with this pressure washer.

2.  The Spray Control Sleeve on the Spray Wand 

can be rotated for a range of spray patterns, 

from a full fan spray to a direct stream spray.

 

0.517261s