Onkyo RC-391M User's Manual | Page 5

Onkyo Universal Remote User's Manual - RC-391M.
Download
Page  of 9
4.6, 1435 votes
background image

35

Programming the remote controller codes of other devices into the RC-391M

See page 39 for information on how to erase the learned codes from all buttons.

You can erase a learned code. You cannot erase preset codes.

• Erasing a code programmed in a button
1. Press and hold down the corresponding MODE button and

press the ENT button, then release the buttons.
When you press the MODE button, the SEND/LEARN indica-
tor lights up. When you press the ENT button, the indicator
turns off. When you release the buttons, the indicator lights up
again.

2. Press and release the button from which you wish to erase

the learned code.
When you press the button, the SEND/LEARN indicator turns
off. When you release the button, the indicator lights up again.

3. Press and release the same button again.

The SEND/LEARN indicator flashes twice slowly. The learned
code is erased.

Note:

• If you do not press the button in step 2 or 3 for more than 30 sec-

onds, the SEND/LEARN indicator flashes three times quickly,
then the RC-391M exits Learning mode. Resume Step 1.

1. Press and hold down the MODE button from which you

wish to erase the learned code, and press the ENT button
twice. Then release the buttons.
When you press the MODE button, the SEND/LEARN indica-
tor lights up. When you press the ENT button, the indicator
turns off. When you release the buttons, the indicator flashes
twice slowly, then lights up again.

2. Press and release the same MODE button again.

When you release the button, the SEND/LEARN indicator
flashes twice slowly. The learned code is erased.

Note:

• If you do not press any button for more than 30 seconds, the

SEND/LEARN indicator flashes three times quickly, then the
RC-391M exits Learning mode. Resume Step 1.

• If you make a mistake during programming, the SEND/LEARN

indicator flashes three times quickly, the RC-391M exits Learn-
ing mode. Resume Step 1.

• If have programmed many button operations to a single MODE

button, the SEND/LEARN indicator may remain illuminated
continuously in Step 2. This is not malfunction.

Erasing a learned code

Erasing a learned code from a MODE button

SEND/LEARN

indicator

MODE 
buttons

ENT

SEND/LEARN

indicator

MODE 
buttons

ENT

Related Manuals for Onkyo RC-391M

0.558616s