One For ALL URC-7960 Instruction Manual | Page 4

One For ALL Universal Remote Instruction Manual - URC-7960.
Download
Page  of 35
4.1, 2414 votes
background image

Start by checking if the brand of your particular device is listed in the “SimpleSet”
brand list and check which “number key” is assigned to your brand (e.g. Hitachi tv = 1).

Press and hold MAGIC for 3 seconds until the (blue) ring around the OK key will light up twice.

Select the device you wish to set up (e.g. tv).

Press and hold the “number key” according to your brand (e.g. for Hitachi tv = press 1) until your device
switches off (max. 36 seconds). 
The Blue LED ring and corresponding device mode LED will light up every
3 seconds as a ‘power signal’ is being send. Make sure to release this “number key” as soon as your device
switches OFF to complete the set up.

• If your brand is not listed in the “SimpleSet - brand list”? --> Go to the Direct Code Set up.
• The ONE FOR ALL is not performing commands properly? --> Simply repeat SimpleSet
• If SimpleSet is unsuccessful? --> Go to the Direct Code Set up or try the Search Method.

1

2

3

1

2

3

1

2

3

1

2

3

1

2

3

1

2

3

Überprüfen Sie zunächst, ob die Marke Ihres Geräts in der Liste „SimpleSet“ aufgeführt

und welche Zahlentaste dieser Marke zugeordnet ist (z. B. Hitachi Fernsehgerät = 1).

Halten Sie die Taste „MAGIC“ 3 Sekunden lang gedrückt, bis der blaue LED-Ring zweimal aufleuchtet.

Wählen Sie das Gerät aus, das Sie einrichten möchten, z. B. ein Fernsehgerät (tv).

Halten Sie die Ihrer Marke zugeordnete Zahlentaste (z. B. 1 für ein Hitachi Fernsehgerät) so lange gedrückt, bis
sich Ihr Gerät ausschaltet (max. nach 36 Sekunden). 
Der blaue LED-Ring sowie die LED des entsprechenden
Geräte-Modus leuchtet alle 3 Sekunden auf, während ein Signal übertragen wird. Stellen Sie sicher, dass Sie die
Zahlentaste sofort loslassen, wenn sich Ihr Gerät ausgeschaltet hat, um die Einrichtung abzuschließen.

• Ihre Marke ist nicht in der Liste„SimpleSet“ aufgeführt? --> Befolgen sie bitte die “Direkte Codeeinrichtung”.
• Die ONE FOR ALL Fernbedienung führt Befehle nicht richtig aus? --> Wiederholen Sie einfach„SimpleSet“.
• „SimpleSet“ nicht erfolgreich? --> Befolgen sie bitte die “Direkte Codeeinrichtung” oder versuchen Sie es mit der “Suchmethode”.

Antes de comenzar, compruebe que la marca de su dispositivo aparece en la lista
de marcas de SimpleSet y qué número se le ha asignado (p. ej., tv Hitachi = 1).

Mantenga pulsado MAGIC durante 3 segundos hasta que el indicador circular azul alrededor de
la tecla OK se ilumine dos veces.

Seleccione el dispositivo que desea configurar (p. ej., tv).

Mantenga pulsado la tecla del número asignado a su marca (p. ej., para tv Hitachi = pulse 1) hasta que el
dispositivo se apague (máx. 36 segundos). El indicador circular LED de color azul y el indicador LED del
dispositivo correspondiente se iluminarán cada 3 segundos mientras se esté transmitiendo la señal.
Asegúrese de soltar esta tecla una vez apagado el dispositivo para completar la configuración.

• Su marca no aparece en la lista de marcas de SimpleSet? --> Vaya a la sección de configuración por código directo.
• El ONE FOR ALL no realiza los comandos correctamente? --> Repita el proceso de configuración SimpleSet.
• SimpleSet no es satisfactorio? --> Vaya a la sección de configuración por código directo o pruebe el método de búsqueda.

Vérifiez tout d'abord que la marque de votre appareil figure dans la liste « SimpleSet » et
repérez la touche numérique qui y est associée (tv Hitachi = 1, par exemple).

Maintenez la touche MAGIC enfoncée pendant 3 secondes, jusqu'à ce que l'anneau (bleu) autour de la touche
OK clignote deux fois.

Sélectionnez l'appareil à programmer (« tv » par exemple).

Maintenez la touche numérique correspondant à votre marque enfoncée (pour une télévision Hitachi, par
exemple, appuyez sur 1), jusqu'à ce que l'appareil s'éteigne (maximum 36 secondes). L'anneau lumineux bleu et
la diode de mode correspondant à l'appareil s'allument toutes les 3 secondes pendant l'émission d'un
signal d'alimentation. Relâchez la touche dès que votre appareil s'éteint pour terminer la configuration.

• La marque de votre appareil ne figure pas dans la liste « SimpleSet ». --> Passez à la Configuration par code.
• La ONE FOR ALL ne fonctionne pas correctement. --> Il suffit de recommencer la programmation SimpleSet.
• SimpleSet a échoué. --> Passez à la Configuration par code ou essayez la Methode de recherche.

Verificare, per prima, che la marca del dispositivo in uso sia presente nell'elenco di marche
"SimpleSet" e quale "numero" è stato assegnato a tale marca (ad esempio, tv Hitachi = 1).

Tenere premuto il tasto MAGIC per 3 secondi finché il LED dell’anello blu non lampeggia per due volte.

Selezionare il dispositivo che si desidera configurare (ad esempio, il tv).

Tenere premuto il numero assegnato a la marca del suo dispositivo (es. per tv Hitachi = premere 1) fino a
quando il dispositivo non si spegne (massimo 36 secondi). Il LED dell’anello blu e il LED corrispondente al
la modalità del dispositivo si accenderanno ogni 3 secondi ad indicare l'invio del segnale di alimentazione.
Per completare la configurazione, rilasciare il tasto non appena il dispositivo si spegne.

• Sua marca non è presente nell'elenco "SimpleSet"? --> Andare alla sezione Impostazione con codice diretto.
• I comandi di ONE FOR ALL non funzionano correttamente? --> Ripetere semplicemente SimpleSet
• SimpleSet non e successivo? --> Andare l’Impostazione con codice diretto oppure provare con il Metodo di ricerca.

Comece por verificar se a marca do seu dispositivo específico está listada na lista de marcas
“SimpleSet” e que “tecla numérica” está atribuída à sua marca (por ex., Hitachi tv = 1).

Prima sem largar MAGIC durante 3 segundos até que o anel (azul) à volta da tecla OK se acenda duas vezes.

Seleccione o dispositivo que pretende configurar (por ex., tv).

Prima sem largar a “tecla numérica” de acordo com a sua marca (por ex., para Hitachi tv = prima1) até o
dispositivo desligar (no máx. 36 segundos). O anel LED azul e o LED de modo do dispositivo correspondente
acendem de 3 em 3 segundos enquanto é enviado um sinal de alimentação. Certifique-se de que a solta assim
que o seu dispositivo DESLIGAR, para concluir a configuração.

• Sua marca não estiver listada na “SimpleSet - lista de marcas”? --> Avance para a Configuração de Código Aberto.
• O telecomando UNIVERSAL não está a executar os comandos correctamente? --> Basta repetir a SimpleSet
• A SimpleSet não foi concluída com êxito? --> Avance para a Configuração de Código ou o Método de Busca.

English

Deutsch

Español

Français

Português

Italiano

URC-7960_MANUAL-V1-RDN-1071009-1020:URC-7960  07-10-2009  14:51  Pagina 4

 

Related Manuals for One For ALL URC-7960

0.498354s