Nokia EXTRA POWER DC-11K User's Manual | Page 4

Nokia Battery Charger User's Manual - EXTRA POWER DC-11K.
Download
Page  of 7
4.7, 1923 votes
background image

ENGLISH

Charge the battery of the other device

You can use the DC-11 device to 
charge the battery in two devices 
at the same time.

The fully charged DC-11 device has 
enough power to fully charge a 
950 mAh battery once.

1. If the charger plug you want to 

use is inserted into the end of the 
DC-11 device, pull the plug out 
from the recess, and uncoil the 
charging cable from the side of 
the device.

2. Connect the charger plug to the 

other device.

3. Press the power key of the DC-11 

device.

The indicator light flashes during 

charging. If the light does not 
flash, check that the other device is 
properly connected to the DC-11 
device. If the light is not displayed, 

charge the DC-11 device, and press 
the power key to switch it on.

If the DC-11 device cannot start 

charging the other device within 
about 30 seconds, the DC-11 
device switches off.

4. Check the charge level from the 

connected device.

5. When the battery in the other 

device becomes fully charged, the 
indicator light stops flashing and is 
continuously shown for about 
30 seconds, and the DC-11 device 
switches off. You can also stop 
charging and switch off the DC-11 
device by pressing and holding the 
power key for about 5 seconds. The 
DC-11 device automatically 
switches off if it becomes 
discharged.

Related Manuals for Nokia EXTRA POWER DC-11K

0.508974s