Netgear MBM621 Installation Guide

Netgear Network Router Installation Guide - MBM621.
Download
Page  of 2
4.2, 2253 votes
background image

)NSTALLATION'UIDE

Mobile Broadband Modem MBM621

Requirements

Before installation, make sure that these requirements are met:

You must have an account for wireless broadband service, and you must be located in 
an area with wireless broadband coverage. Check with your Internet Service Provider 
(ISP) if you are not sure.

You need an activated SIM card from your ISP.

You must have a computer with an available Ethernet port to connect to the Mobile 
Broadband Modem. 

Your computer must be configured with DHCP.

For installation with a router, first install the Mobile Broadband Modem to work with 
a computer. Then follow the instructions that came with the router to connect the 
router to the modem. 

Installation
Follow these instructions to install the modem.

Install the SIM Card, and Connect the Modem to a 
Computer

To connect the Mobile Broadband Modem: 

1.

Turn off your computer.

2.

Insert your activated SIM card into the 
slot on the rear of the modem. 

3.

Attach the cover to protect the SIM 
card.

Power On the Modem and Computer

Follow these steps:

1.

Plug in the power adapter to your 
modem. 

2.

Verify the following:

The Power light is lit after 

you apply power to the modem.

The Status light comes on 

briefly and then goes off.

The Internet light comes on.

For more information about LEDs, see 
“Understanding the LEDs” on the other side of this document.

3.

Attach the feet to the modem, and adjust 
the antenna so that it is pointed up at a 90 
degree angle for best performance.

4.

Turn on your computer, let the operating 
system boot up, and log in as needed. 

The 

 Ethernet (LAN) light on the 

modem lights up.

4.

Connect the Ethernet cable that came with your
modem to an Ethernet local area network (LAN)
port on your computer. and to the Ethernet port on
the modem.

Log In to the Modem, and Connect to the Internet

1.

On your computer, open a Web 
browser. 

2.

Type http://modemlogin.net 
in the address field of your browser.

3.

Enter admin for the user name, and 
password for the password, both in 
lower case letters. 

The Broadband Settings screen opens.

If your SIM card is programmed by your ISP 
with broadband settings, the settings are 
displayed on this screen. Click Connect. The 
modem connects to the Internet. 

If your SIM card is not programmed then you 
must enter the settings, click Apply to save 
the settings, and then click Connect. The 
settings are explained below:

User Name. The user name for the 
broadband Internet service account. 
This is not admin, which is the modem user name.

Password. The password for the broadband Internet service account.

PIN Code. The PIN code for the SIM card.

APN. The ISP network name.

PDP Type. The type of packet data protocol.

Connection check boxes. These settings determine whether or not the 
modem connects at startup or reconnects when an Internet connection is 
lost.

If you are not sure what to enter for these settings, contact your ISP. 

Related Manuals for Netgear MBM621

0.492733s