Netgear FA331 User's Manual
5. Fasten the card to the rear of the computer chassis by tightening the screw that is on the PC.
6. Replace the PC cover and reconnect the power cord to the PC.
Connect the Network Cables
Using the appropriate cable, connect the port on a network hub or switch to the port on the card. The port
on the card performs autonegotiation and supports full-duplex operation.
This section explains how to install the Network Driver in various Microsoft Windows Operating Systems.
Some versions of Microsoft Windows Operating System may respond with different dialog boxes, or the
dialog boxes may open in a different sequence than those shown in this guide, but should prompt you for the
same information.
Before you proceed with the installation steps, decide on a name for your network and for each PC. The
whole network must have the same workgroup name while each PC must have a unique name. These names
can be entered by going to Start>Settings>Control Panel>Network and clicking on the Identification tab.
You also need to have the Microsoft Windows Operating System CD-ROM and the GearBox for Adapters
CD ready to use in the installation process.
The installation screen uses FA311 as example.
Install the Windows XP Network Driver
Note: If the “Insert Disk” window opens and a message prompts you to insert your Windows CD-ROM at
any time during the installation process, insert the Windows CD-ROM in Drive D (the CD-ROM drive) and
click on “OK”. Then follow the next step in the instructions.
For FA311 and FA312 Adapters:
1. After installing the FA311 (or FA312) PCI Adapter, the Win XP will install the driver automatically.
2. You can go directly to section 4. “Test Your Network Connection”. Following the steps to check if the
driver is well installed.
For FA331 Adapters:
1. Turn on the power to the computer and start Windows XP.
2. Double-click “My Computer” on the desktop, double-click “Control panel” and then double-click
“System”.
3. Click “Hardware” and click “Device Manager” tab, then double-click “Network adapters”.
Installation Guide
Everybody ’s connecting.™
32bit
10/100 Mbps Fast Ethernet
FA311/FA312/FA331
PCI Adapter
S
R
E
T
U
O
R
S
S
E
L
E
R
I
W
S
E
H
C
TI
W
S
S B
U
H
S
R
E
T
P
A
D
A
®
NETGEAR, Inc.
Support Information
Phone: 1-888-NETGEAR
E-mail: support@NETGEAR.com
www.NETGEAR.com
See Support Information Card for for additional phone numbers.
Internet / World Wide Web
Go to http://www.NETGEAR.com for the NETGEAR Web page.
Defective or damaged merchandise can be returned to your point-of-sale representative.
IMPORTANT!
Please register online. YOU MUST REGISTER TO OBTAIN TECHNICAL SUPPORT. PLEASE RETAIN
PROOF OF PURCHASE and this warranty information. To register your product, get product support, or to
obtain product information and NETGEAR product documentation, direct your Web browser to the
http://www.NETGEAR.com Web page.
July 2002
M
-
F
A
3
0
0
N
A
-
3
Instructions in this guide are for users of Microsoft Windows Operating Systems.
As a last step, be sure to register your Adapter at
http://www.NETGEAR.com.
Plan Your Time
Estimated setup time for this product is only minutes.
Unpack the contents of the package and make sure that you have everything.
• FA311 (or FA312, FA331) Fast Ethernet PCI Adapter
• GearBox for Adapters CD
• FA311/FA312/FA331 Installation Guide
Install the Card
Note: Touch a grounded metal object to free yourself of static electricity before you handle the card.
1. Turn the power off and unplug the power cord from your computer.
2. Remove the PC cover.
3. Choose an available PCI slot and remove the corresponding back plate from the PC chassis.
4. Insert the card into the PCI expansion slot.
Caution: To avoid damaging any components on the card, handle it by the edges, using your thumbs
to push it securely into the PCI slot. Make sure the card is fully inserted into the slot to prevent the PC
operating system from freezing at startup.
1 VERIFY PACKAGE CONTENTS
Model FA311 (or FA312, FA331)
Network Card
GearBox for Adapters CD
3-pin LAN wake cable
(provided with Model FA312)
Installation Guide
2 CONNECT NETGEAR TO YOUR ENVIRONMENT
Network card
Back plate
removed
PC with network
card installed
Power adapter
PC with network
card installed
Printer
(optional)
Hub
RJ-45
Connector
Category 5 10/100 Mbps
UTP cables*
RJ-45
Connector
Use the cables provided or any Category 5 UTP cable.
Maximum length = 100 meters (300 feet)
*
4. Double-click “National Semiconductor DP83815-Based PCI Fast Ethernet adapeter”.
5. Click “Driver” and click “Update Driver” tab, then click “OK”.
6. A Hardware Update Wizard will appear. Insert the GearBox for Adapters CD (or disk) into your
CD-ROM drive. Select “Install from a list or specific location ( Advanced )”. Click “Next”.
7. When the following dialog box opens, select “Don’t search. I will choose the driver to install.”, then
click “Next”.
8. When Select Network Adapter box opens, click “Have Disk” then click “Next”.
1. Open the box
and verify its
contents
2. Connect NETGEAR to
your environment
3. Install Network Driver
4. Test Your Network Connection
5. Enjoy being connected!
START HERE
0:10
3 INSTALL NETWORK DRIVER
9. The Install From Disk box will open. Type “D:\” and click “OK”.
10. “NETGEAR FA330/FA331 PCI Adapter” will appear in the model list. Click “Next”.
11. The next Windows appears with the following adapter name : NETGEAR FA330/FA331 PCI Adapter.
Click “Finish”.
12. Remove the GearBox for Adapters CD (or disk) from the CD-ROM drive.
The Model FA311/FA312/FA331 Adapter driver installation for Windows XP is now complete.
Install the Windows 2000 Network Driver
Note: If the “Insert Disk” window opens and a message prompts you to insert your Windows CD-ROM at
any time during the installation process, insert the Windows CD-ROM in Drive D (the CD-ROM drive) and
click on “OK”. Then follow the next step in the instructions.
1. A Found New Hardware Wizard dialog box will appear, indicating that Windows 2000 has found the
adapter. Insert the GearBox for Adapters CD (or disk) into your CD-ROM drive (or disk drive).
2. Click “Next”.
Related Manuals for Netgear FA331
-
Denon Network Hardware Denon Network Hardware AVR-3312CI User's Manual
157 pages
-
Denon Network Hardware Denon Network Hardware AVR-3313CI User's Manual
10 pages
-
Harman Kardon Network Hardware BTA 10 User's Manual
8 pages
-
ASUS Network Hardware Asus Rackmount Server Z9PPD24 User's Manual
188 pages
-
ASUS Network Hardware Gigax Gx1008b Ethernet Switch GX1008B User's Manual
2 pages
-
Honeywell Network Hardware NETAXS-123 User's Manual
76 pages
-
Samsung Network Hardware Samsung LinkStick Wireless LAN Adapter WIS12ABGNX User's Manual
1 pages
-
ZyXEL Network Hardware IP PBX X6004 User's Manual
4 pages
-
Lenovo Network Hardware Nas App Ix4-300d Diskless 70B89003NA User's Manual
147 pages
-
Lenovo Network Hardware Emc Px4-300r Ntwk Stor Array Server 8tb 70BJ9007WW User's Manual
165 pages
-
Bunn Network Hardware GRX-B User's Manual
15 pages
-
Corsair Network Hardware Corsair Obsidian Series 250d Mini CC9011047WW User's Manual
2 pages
-
Agilent Technologies Network Hardware Agilent Technologies Network Hardware 3589A User's Manual
151 pages
-
VBrick Systems Network Hardware VBRICK APPLIANCE VB6000 User's Manual
124 pages
-
APC Network Hardware Symmetra AR8136BLK200 User's Manual
44 pages
-
APC Network Hardware AP9810 User's Manual
4 pages
-
APC Network Hardware AP9810 User's Manual
32 pages
-
APC Network Hardware Symmetra SYCF160KH User's Manual
44 pages
-
Black Box Network Hardware Black Box Network Hardware ACS4222A-R2-xx User's Manual
58 pages
-
Saeco Coffee Makers Network Hardware INCANTO SUP021YR User's Manual
16 pages
-
PowerDsine Network Hardware PowerDsine 7001G PoE Injector 7001G User's Manual
1 pages
-
Cyclades Network Hardware Network Hardware ACS48 User's Manual
160 pages
-
HP Network Hardware Network Hardware HP 4396A User's Manual
24 pages
-
General Dynamics Network Hardware General Dynamics Network Hardware LT-3600 User's Manual
26 pages