NEC PowerMate ES SlimLine Series User's Manual

NEC Personal Computer User's Manual - PowerMate ES SlimLine Series.
Download
Page  of 1
4.1, 1255 votes
background image

Memory Upgrade

■ Maximum memory supported: 512 MB; 

minimum memory required: 32 MB.

■ Memory type and size can vary between sockets.

■ System supports 168-pin, 100-MHz non-ECC SDRAM modules 

in 32-MB, 64-MB, 128-MB, and 256-MB configurations.
Use NEC memory upgrade kits for the best compatibility with your
system. For memory compatibility information, call Technical Support.

■ Single- or double-sided DIMMS are supported.

■ No jumper setting required.

409-00065-000

PowerMate® ES SlimLine Series System Board Configuration

Note: See your PowerMate ES SlimLine Series User’s
Guide 
for detailed option installation information.

Website: www.nec-computers.com
Technical Support: 800-632-4525

Secondary 
IDE Connector

Processor Socket
(Socket 370)

System 
Memory
Upgrade 
Sockets

Primary
IDE Connector

J4

Jumper

JP4

Jumper

JBAT1

Jumper

Processor Upgrade

See your user’s guide for detailed processor upgrade information.

JP3

Jumper

JKBV1

Jumper

Jumper Settings

J23

Jumper

BIOS

Factory setting. Sets the system for 

Recovery

normal operation. The BIOS uses current 
configuration information and passwords 
at power on.

To enable BIOS recovery for a corrupted 
system, remove the jumper. Wait 10 seconds.
Replace the jumper on pins 1 and 2.

Restores Safe BIOS settings as the 
default BIOS settings and loads the 
BIOS Setup at power on.

1 2 3

J4

1 2 3

J4

CPU

Factory setting. 

Type

Uses an Intel® CPU.

3
2

1

J23

Uses a Cyrix® CPU.

3
2

1

J23

CMOS

Factory setting. Maintains system board 

Clear

configuration in CMOS RAM 
with onboard battery.

Clears CMOS while system power is off.  
Return jumper to pins 1 and 2 before 
powering system on.

Caution: To prevent damage to the system board,

avoid clearing CMOS while power is on.

3
2

1

JBAT1

3
2

1

JBAT1

Keyboard

Factory setting. Wakes up the system from 

Wakeup

Suspend to RAM mode via the keyboard. 
Requires Windows 98 running in Advanced 
Configuration Power Interface (ACPI) mode.

Normal operation. 
Disables Keyboard Wakeup.

3 2 1

JKBV1

3 2 1

JKBV1

Onboard 

Factory setting. Enables onboard audio.

Audio

Disables onboard audio. Use this 
setting if you install a sound card.

1 2 3

JP3

1 2 3

JP3

Save to

Factory setting. Enables the

RAM

Save to RAM function.

Disables the Save to RAM function.

JP4

JP4

409-00065-000  4/19/00 3:01 PM  Page 1

Related Manuals for NEC PowerMate ES SlimLine Series

0.505894s