Download Motorola 6809496A47-A User's Manual for Free

Download Headphones User's Manual of Motorola 6809496A47-A for free from ManualAgent.
 Download
( 4.2, 34 Votes )
Page  of 2
6809496A47-A
Note: The remote control functions only
work when the headphones are directly
connected to source device. via Bluetooth.
Your headphones are designed to be worn
comfortably with the neck band positioned
behind your head.
The microphone is located in the right ear-piece.
Digital Signal processing is used for clear pick-
up of your voice during voice calls.
Call Button
Indicator
Volume
Buttons
To adjust the volume, press the
+
or
-
buttons on the left side of your
headphones.
To Skip Back to the previous song: Press
the Skip Reverse Button
<
on the right
side of your headset.
To Skip forward to the next song: Press the
Skip Forward Button
>
To Play, Pause, or Stop music: Press the
Music Button
M
to play, pause, or stop the
music.
To connect non-Bluetooth Devices to your
headphones: Use the headphone jack and
the included cable.
HT820
Bluetooth®
Stereo Headphones
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
CHARGE
Your Headphones' Battery
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The Bluetooth trademarks are
owned by their proprietor and used by Motorola, Inc. under
license. All other product or service names are the property of
their respective owners. © Motorola, Inc. 2005.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196 USA
www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1-800-461-4575 (Canada)
Note: Headphones do not function while charging.
Start Here > > >
Before using your HT820 for the first time,
charge the headphones for 2 hours:
Plug the Motorola charger into the
headphones. The indicator light turns on
when the battery is charging. When the
headphones' battery is fully charged, the
indicator light turns off.
Disconnect the charger.
1
2
Charger
Insert Charger
Here
Music Button
Indicator
Light
(Right Side)
PAIR
Before you can use your headphones with a
Bluetooth enabled product, you must pair it
with that product. To pair:
1
Call Button with
Indicator Light
(Left Side)
1
Next, put your Bluetooth Enabled audio
device in pairing mode so the devices can
"talk" to each other.
For details about putting Bluetooth
Enabled devices in pairing mode, refer to
the device's User's Guide for directions.
2
Note: To pair the headphones with your phone, see "Pair
with your Phone," on the reverse side of this guide.
WEAR THE HEADPHONES
You can also use a Motorola Original™
Vehicle Power Adapter to charge your
headphones while in your vehicle.
Make sure your headphones are turned off
(see Turning On and Off ) and press and
hold the left side Call
m
button for 6
seconds until the indicator light turns on and
remains steadily lit.
2
To turn your headphones on, press and hold
the left side Call
m
button until the indicator
light flashes 3 times (about 3 seconds).
Then,
release the button.
To turn your headphones off, press and hold
the left side Call
m
button until the indicator
light flashes
rapidly and then turns off
(about 3
seconds)
.
To conserve battery power, turn off the
headphones when you will not be using it.
TURN ON AND OFF
A fully charged battery provides
approximately: 14 hrs of music listening, 17
hrs of talk time, or 500 hrs of standby time.
USE THE HT820
Ready to make it work
- Charge your Headphones for 2 Hours (CHARGE)
- Pair headphones & audio device (PAIR)
- Pair phone & headphones (back side of this guide)
- Listen to music and take calls!
6809496A47-A
Your Headphones & Audio Device
After successfully pairing, you do not need to
repeat these initial setup steps each time you
use the headphones. Just power on both
devices and they automatically connect.
1
2
To confirm they are operating properly:
3
TEST AND USE
Place the headphones on your head. See
Wear the Headphones in this guide.
Start playing music on the audio device. If
your headphones are successfully paired,
you will hear music in the headphones.
Note: You may need to wait several seconds before
hearing music in the headphones while the devices
connect.
See Music Controls for information about
using the HT820 volume and playback
controls.
Your headphones are successfully paired
with a device and ready to use when the
blue indicator lights changes from steadily lit,
flashes rapidly, and then slowly flashes.
Bluetooth
Enabled
Phone
HT820
Any Bluetooth
Enabled Audio
Device*
o
*The Bluetooth Enabled Audio Device must be A2DP compatible
You can use your HT820 headphones
simultaneously with a Bluetooth A2DP
enabled audio device and your Bluetooth cell
phones!
Listen to music, hear a beep, and transfer to
take the call on the headphones. Hang up the
call with a push of a button and your music
automically continues playing.
CONNECT SIMULTANEOUSLY
Simultaneous connect your headphones
with a music device AND your phone!
Pair the headphones to the music device
(PAIR). Then pair the headset with your
phone (backside of guide). Power your
headphones off and then back on. After a
few moments it will connect with both the
music device and phone.
TROUBLESHOOTING
MUSIC CONTROLS
Skip Reverse
Skip Forward
Music Button
Headphone
Jack
Are you having sound interruption or
connection issues
Bluetooth as a wireless technology could
be subject to interference of other
wireless traffic existing in your
environment. Try turning your headphone
off and back on. This automatically resets
the connection.
If you experience audio interruptions while
the headphone is connected to both
music source and a Bluetooth phone,
disconnecting the phone will eliminate the
audio interruptions.
Bluetooth
Enabled
Phone
Any Bluetooth
Enabled Audio
Device*
o
Left Side
Right Side
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/bluetooth and click
Support.

Related Manuals for Motorola 6809496A47-A