Sanyo VPC-S500 Manuals
Sanyo Cameras VPC-S500 manuals download on ManualAgent: Instruction Manual
-
Document Outline
- INTRODUCTION
- GETTING TO KNOW YOUR CAMERA
- Front View
- Rear View
- LCD Monitor Information
- 2. Flash mode
- 3. Capture mode
- 4. Focus mode
- 5. Possible number of shots
- 6. Memory status
- 7. Battery
- 8. Recorded pixels
- 9. Image quality
- 10. White balance
- 11. ISO sensitivity
- 12. EV compensation
- 13. Focus area
- 14. Zoom bar
- 2. Flash mode
- 3. Recordable movie time available
- 4. Memory status
- 5. Battery power indicator
- 6. Focus area
- 7. Zoom bar
- 2. Number of image
- 3. Memory status
- 4. Battery power indicator
- 5. Index number of total number
- 6. DPOF indicator
- 7. Protect indicator
- 8. Date
- 9. Time
- 10. Aperture
- 11. Shutter speed
- 12. EV compensation
- 13. ISO sensitivity
- 14. White balance
- 15. Image quality
- 16. Recorded pixels
- 2. Movie mode
- 3. Number of movie
- 4. Memory status
- 5. Battery power indicator
- 6. Index number of total number
- 7. Elapsed time
- 8. Date
- 9. Time
- 10. Play/Pause indicator
- PREPARING THE CAMERA
- GETTING STARTED
- PHOTOGRAPHY MODE
- Shooting Images
- Mode Dial
- Setting the Panorama Mode
- 2. Shoot the first image.
- 3. Orient the camera so that the second frame overlaps a small portion of the photographic subject of the first image and press the shutter button to capture the next image.
- 4. Follow the same steps to capture subsequent images in the sequence.
- 5. Finish the sequence by pressing the MENU button or rotate to another mode after the last image has been recorded.
- Setting Image Resolution and Quality
- Using the Zoom Function
- Using the Flash
- 2. Press the power switch to turn on the power.
- 3. Press the four-way controller (t/). The flash mode changes each time the button is pressed. You can also change the setting using the four-way controller (pq).
- 4. Press the button to confirm the setting.
- 5. Compose your scene and press the shutter release button.
- Setting Focus
- 2. Press the power switch to turn on the power.
- 3. Press the four-way controller (u/). The focus mode changes each time the button is pressed. You can also change the setting using four-way controller (pq).
- 4. Press the button to confirm the setting.
- 5. Compose your scene and press the shutter release button.
- CAPTURE MODE
- Burst
- 2. Press the power switch to turn on the power.
- 3. Press the four-way controller (p/) and use (p) to select [Burst]. You can also change the setting using four-way controller (tu).
- 4. Press the button to confirm the setting. The indicator is displayed on the monitor screen.
- 5. Press the shutter release button halfway to lock the focus.
- 6. Press the shutter release button to capture a sequence of images.
- Auto Bracket
- 2. Press the power switch to turn on the power.
- 3. Press the four-way controller (p/) and use (p) to select [AEB]. You can also change the setting using the four-way controller (tu).
- 4. Press the button to confirm the setting. The indicator is displayed on the LCD monitor screen.
- 5. Press the shutter release button to capture the three images.
- Self-Timer
- 2. Rotate the mode dial to , , , , , or .
- 3. Press the power switch to turn on the power.
- 4. Press the four-way controller (p/) and use (p) to select your desired self-timer mode. You can also change the setting using four-way controller (tu).
- 5. Press the button to confirm the setting.
- 6. Compose your scene and press the shutter release button.
- Adjusting the Exposure (EV Compensation)
- Setting White Balance
- 2. Press the power switch to turn on the power.
- 3. Press the MENU button. [Mode1] is displayed.
- 4. Use the four-way controller (q) to select [W. Balance], then press the button.
- 5. Use the four-way controller (pq) to select the desired white balance setting, then press the button to confirm.
- 6. To cancel the setting, press the MENU button and exit the menu.
- 7. Press the shutter release button to capture the image.
- Burst
- PLAYBACK MODE - THE BASICS
- Viewing Images
- Magnifying Images
- Thumbnail Display
- Slideshow Display
- Resizing an Image
- 2. In the mode, use the four-way controller (tu) to select the desired images.
- 3. Press the MENU button to access the Playback menu. Press the four-way controller (u) to select [Playback2] and press (q) to select [Resize] and press the button.
- 4. Use the four-way controller (pq) to select the desired setting, then press the button to confirm.
- MOVIE MODE
- PLAYBACK MODE - ADVANCED FEATURES
- Deleting Images/Movie Clips
- 2. Press the button.
- 3. Use the four-way controller (tu) to select the image/movie clip you want to delete.
- 4. Press the button to delete.
- 5. Use the four-way controller (pq) to select [This Image] or [All Images] by your preference, then press the button.
- 6. When the delete message appears, use the four-way controller (pq) to select [Yes], then press the button to confirm the deletion.
- Protecting Images/Movie Clips
- 2. In the mode, use the four-way controller (tu) to select the desired images.
- 3. Press the MENU button, then use the four-way controller(q) to select [Protect] and press the button.
- 4. Use the four-way controller (pq) to choose the desired setting, then press the button.
- 5. Use the four-way controller (pq) to select [Lock], then press the button to confirm.
- Setting the DPOF
- 2. Press the MENU button. Use the four-way controller (pq) to select [DPOF], then press the button.
- 3. Use the four-way controller (pq) to select by your preference, then press the button.
- 4. Use the four-way controller (pq) to select by your preference, then press the button.
- 5. Press the MENU button to return to the image playback mode.
- Deleting Images/Movie Clips
- TRANSFERRING RECORDED IMAGES AND VIDEOS TO YOUR COMPUTER
- Connect the digital camera to your computer
- 2. Press the four-way controller (u) to select the [Set-up2] menu, then use the four-way controller (q) to select [USB Mode].
- 3. Press the button.
- 4. Use the four-way controller (q) to select [PC], then press the button.
- 5. Turn off your camera.
- 6. Connect your camera and the computer via the supplied USB cable.
- 7. Turn your camera on by pressing the power switch.
- 8. There will be a new “Removable Disk” icon detected in “My Computer”, which contains your recorded images or movie clips. (For Mac users, double-click [untitled] or [unlabeled] disk drive icon on our desktop.)
- Download images or movie clips
- Connect the digital camera to your computer
- EDITING SOFTWARE INSTALLATION
- MENU OPTIONS
- Camera Menu
- Movie Menu
- Playback Menu
- 2. Press the MENU button, then use the four-way controller (pq) to select the [Playback1] / [Playback2] menu.
- 3. Use the four-way controller (pq) to select the option item, then press the button.
- 4. Press the four-way controller (pq) to select the desired setting, then press the button.
- 5. To exit the playback menu, press the MENU button.
- Setup Menu
- SPECIFICATIONS
- TROUBLESHOOTING GUIDE
- POSSIBLE NUMBER OF RECORDABLE IMAGES
- CONNECTING TO A PICTBRIDGE-COMPATIBLE PRINTER
- SYDC-5360_EN_Preface.pdf
Related Models for Sanyo Cameras VPC-S500
- Sanyo VPC-503
- Sanyo VPC-603
- Sanyo VPC-E1075
- Sanyo VPC-E1500TP
- Sanyo VPC-E6
- Sanyo VPC-E60
- Sanyo VPC-E60EX
- Sanyo VPC-E6GX
- Sanyo VPC-E7
Sanyo Popular Categories
Headphones
Cameras
Televisions
Air Conditioners
Mobile Phones
Projectors
Servers
Printers
Washers
Refrigerators
Ovens
Thermostats
Vacuum Cleaners
Musical Instruments
Coffee Makers
Fax Machine
Telephone
Routers
More Sanyo Manuals