Kenwood Sovereign VR-5700 Manuals
Kenwood DVR Sovereign VR-5700 manuals download on ManualAgent: User's Manual
-
Document Outline
- VR-5700_5090_5080
- Table of Contents
- Using Your New Kenwood Audio-Video Receiver
- Chapter One: Moving Around
- Chapter Two: Controlling the Receiver
- How Do I Adjust the Sound?
- How Do I Adjust the Surround Modes?
- What is the THX?
- What are Listen Modes?
- Checking the Input signal during playback
- Input Modes (only for input with digital jacks)
- Switching Input Modes
- To set the THX Mode
- To set the Listen Mode manually
- Examples of inputs with which switching is available
- Description of Dolby Pro Logic II: Music mode
- Selecting the parameter of Pro Logic II : Music mode
- Applying Digital Signal Processor (DSP) Effects
- Setting a DSP effect
- HDCDR and D.R.I.V.E. Effects
- Headphone Operation
- Selecting the Inputs
- How Do I Operate Devices?
- Playback of the device connected to the CD2/TAPE2 MONITOR
- Operating a Television
- Operating an AV Device
- Operating a CD player
- To play Kenwood 200-Disc CD Changer
- Single or Rotary CD Player
- CD-R Recorder
- Operating an MD Recorder or Cassette Deck
- Playing an Analog Turntable
- Monitoring a Video Camera or Playing an Additional VCR
- Radio Tuning
- Presetting radio stations
- Recording
- How Do I Adjust the LCD Display?
- Executing Several Operations at Once (Macro function)
- Using Remote Control Unit in Multiple Zones
- Chapter Three: Button Layout in Controlling Other Devices
- Chapter Four: Troubleshooting
- Sound
- I don’t hear any sound at all
- Audio is not output only when a 96k fs compatible disc is played.
- The 96k fs indicator does not light while a 96k fs compatible disc is being played.
- I can’t hear sound from one or more of the speakers, or the sound is abnormally low
- I can’t hear sound from my surround or center speakers
- I can hear sound only from the center speaker when Dolby ProLogic is selected
- A DTS-ES encoded source is played but it is not decoded in DTS-ES.
- A Dolby Digital Surround EX-encoded source is played with THX Surround EX set to “Auto”, but the source is not reproduced in 6.1-channel audio.
- Sound from one (or more) of my components is abnormally loud or soft
- I can’t hear sound from some of my laser discs
- There wasn’t any sound recorded on tapes made on my VCR or tape deck
- The initial sound is intermittent or non-existent when I start to play from a Dolby Digital, DTS, DTS-ES or MPEG source
- With a Dolby Digital program or DTS program, the loud sounds aren’t very loud and the quiet sounds aren’t very quiet
- All I hear is loud static when I play DTS discs
- I hear a hum when I select the PHONO input
- I can’t hear any sound in Zone B
- Video
- Remote Control unit
- Receiver/Tuner
- My receiver won’t turn on and the STANDBY indicator is flashing
- The sound is distorted, and the CLIP indicator on the receiver’s front panel flashes red continually, or stays red for more than 1second at a time.
- I can’t receive a radio station
- I’m getting a lot of static/interference
- When I press a button to tune to a preset station, the receiver does not respond.
- Sound
- Numerics
- VR-5700_5090_5080
Related Models for Kenwood DVR Sovereign VR-5700
Kenwood Popular Categories
Audio
Headphones
Appliances
Air Conditioners
GPS
Washers
Ovens
Modems
Musical Instruments
Coffee Makers
Fans
Monitors
Blenders
Kitchen Machines
Mixers
Food Processor
Iron
Cooktop
Saw
Telephone
Subwoofers
Speakers
More Kenwood Manuals