HP VP6100 Manuals
HP Projectors VP6100 manuals download on ManualAgent: User's Manual
-
Document Outline
- HP VP6100 Series
- Digital Projector
- Notice
- Introduction
- 1. Read this user’s guide before you operate your projector and save it for future reference.
- 2. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately...
- 3. Never replace the lamp assembly or any electronic components unless the projector is unplugged.
- 4. To reduce the risk of electric shock, do not disassemble this appliance. Take it to a qualifie...
- 5. Do not place this product on an unstable cart, stand, or table. The product may fall, sustaini...
- 6. This product is capable of displaying inverted images for ceiling mount installation. Please u...
- 2. The adjuster will drop into position and be locked.
- Installation
- Operation
- 1. Plug the power cord into the projector and into a wall socket.
- 2. Turn on the main power switch.
- 3. Press and hold POWER to start the unit. The back-lit POWER key flashes green and stays green w...
- 4. Switch on all connected equipment.
- 2. Press < or > to select the desired menu.
- 3. Press v or ^ to select the desired parameter.
- 4. Press < or > to change the setting or open a sub-menu.
- 5. To change another parameter, press v or ^ to select the parameter.
- 6. To go to another menu, press the Menu button, then press < or > to select the menu.
- 7. To close the menu system, press the Menu button one or more times.
- 2. The fan will continue to run for approximately two minutes.
- 3. Turn off the main power switch.
- 4. Disconnect the power cord from the wall socket.
- Maintenance
- 1. Turn off the projector. Disconnect the power cord from the outlet and the projector.
- 2. Loosen the screw and remove the lamp cover. If the lamp is hot, avoid burns by waiting 45 minu...
- 3. Loosen the 3 screws. (It is strongly recommended that you use a magnetic-head screwdriver.) Pu...
- 4. Replace the lamp with a new one. Insert it into the projector, and tighten the screws firmly. ...
- 5. Re-install the lamp cover and tighten the screw. Do not turn on the power with the lamp cover ...
- 6. After the lamp is replaced, turn on the projector and reset the total lamp operation time. To ...
- Troubleshooting
- Specifications
- Technical Specifications
- Resolution
- H Sync (kHz)
- V Sync (Hz)
- Remark
- 640x350
- 31.5
- 70.1
- 640x400
- 37.9
- 85.1
- VESA
- 720x400
- 31.5
- 70.0
- 720x400
- 37.9
- 85.1
- VESA
- 640x480
- 31.5
- 60.0
- VESA
- 640x480
- 37.9
- 72.8
- VESA
- 640x480
- 35
- 66.7
- Macintosh
- 640x480
- 43.3
- 85.0
- VESA
- 800x600
- 35.2
- 56.3
- VESA
- 800x600
- 37.9
- 60.3
- VESA
- 800x600
- 46.9
- 75.0
- VESA
- 800x600
- 48.1
- 72.2
- VESA
- 800x600
- 53.7
- 85.1
- VESA
- 832x624
- 49.7
- 74.5
- Macintosh
- 1024x768
- 48.4
- 60.0
- VESA
- 1024x768
- 56.5
- 70.1
- VESA
- 1024x768
- 60.0
- 75.0
- VESA
- 1024x768
- 68.7
- 85.0
- VESA
- 1280x1024
- 64.0
- 60.0
- VESA
- Dimensions
- Regulatory and Safety
Related Models for HP Projectors VP6100
- HP 30 HP30
- HP 4752
- HP 7030
- HP 760c
- HP B6960-96035
- HP Compaq iPAQ Microportable Projector MP1200
- HP Compaq iPAQ Microportable Projector MP3800
- HP Compaq iPAQ Microportable Projector MP4800
- HP Compaq iPAQ MP3800
HP Popular Categories
Headphones
Cameras
Televisions
Air Conditioners
Mobile Phones
Desktops
Laptops
Projectors
Servers
Tablets
Calculators
Printers
Accessories
Lawn Mowers
GPS
Refrigerators
Ovens
Modems
Adapters
Vacuum Cleaners
Musical Instruments
Storage
Fans
Stud Sensor
Monitors
Bicycles
Cooktop
Saw
Fax Machine
Telephone
Routers
Speakers
Desktop PCs
More HP Manuals