HP Pavilion fx50 15 inch Flat Panel Monitor Manuals
HP Monitors Pavilion fx50 15 inch Flat Panel Monitor manuals download on ManualAgent: User's Manual
-
Document Outline
- Notice
- The information contained in the documents accompanying this product is subject to change without...
- Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not li...
- Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequentia...
- Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment...
- These documents contain proprietary information that is protected by copyright. All rights are re...
- Hewlett-Packard Company Home Products Division P.O. Box 4010 Cupertino, CA 95015-4010 USA
- © Copyright Hewlett-Packard Company, 2001. All rights reserved.
- Hewlett-Packard is a registered trademark of Hewlett-Packard Company in the United States of Amer...
- hp pavilion fx50 P3901 15-inch lcd monitor (15-inch Viewable Image) User’s Guide
- Important Safety Instructions
- What Your New Monitor Offers
- Unpacking Your Monitor
- Setting Up Your Monitor
- Where to Place the Monitor
- WARNING Before you connect any cables, or install your HP monitor, refer to the safety instructio...
- Connecting the Cables
- 1 Make sure the system power is turned off.
- 2 Plug the signal cable into the signal connector at the rear of thePC.
- 3 Plug the adapter output cable into the jack at the rear of the monitor and the power cord to th...
- 4 Plug the video cable into the video connector at the rear of the monitor. Secure the cable by t...
- 5 Connect the audio cables to the connectors according to the following color definitions: Red + ...
- 6 Connect the power cord to the power source.
- 7 Turn on the computer and the monitor.
- Connecting the Speakers
- Changing the Monitor Viewing Position
- Connecting the Cables
- How To Install The Drivers
- Windows 95 and 98 Users
- 1 Click on Start, select Settings, then click Control Panel.
- 2 Double click on Display.
- 3 Click on the Settings tab.
- 4 Click on Advanced Properties or Advanced... and select the Monitor tab.
- 5 Click on Change... to select the model of the HP Monitor you are using.
- 6 Click on Have Disk...
- 7 Click on Browse... to find the P3901.INF file on your CD-ROM under the \Drivers directory and c...
- 8 Select your monitor type from the Models box and click on OK to install the selected monitor.
- Windows 2000 Users only
- 1 Click on Start, select Settings, then click Control Panel.
- 2 Double click on Display.
- 3 Click on the Settings tab.
- 4 Click on Advanced Properties or Advanced... and select the Monitor tab.
- 5 Click on Properties.
- 6 Click on the Driver tab.
- 7 Click on Update Driver... and click on Next.
- 8 Select the Recommended option and click on Next.
- 9 Check the Specify a Location box.
- 10 Find and open the P3901.INF file on your CD-ROM under the \Drivers directory and click on OK.
- 11 Click on Next to install the selected monitor.
- Windows 95 and 98 Users
- Adjusting Your Monitor
- A Look at the Control Panel
- ¿
- ¿
- ¡
- ¬ Ã
- ƒ
- NOTE It is recommended that you select a video mode of 1024 x 768 at 60Hz on your computer for op...
- Automatic Setup
- Manual Setup
- 1 Display the pattern using the CD-ROM as described above.
- 2 Press Enter to display the OSD menu.
- 3 Select the Geometryicon.
- 4 Select Pixel Clockand adjust the value to minimize vertical bars.
- 5 Select Phaseand adjust the value to minimize horizontal bars.
- 6 Select Horizontal Positionand Vertical Positionto adjust screen position.
- 7 Press the Exit button to save the values.
- Using Your Monitor
- Setting the Language
- The Auto Button
- To
- NOTE For best results, it is recommended to use the CD-ROM supplied with the monitor to display a...
- The On-Screen Display (OSD) Main Menu
- ¿
- Making Adjustments
- 1 Press the Menu button to access the main OSD.
- 2 Use the or buttons to move through the sub-menus, and press to enter the sub-menu.
- 3 Use the or buttons to move through the various choices within the sub-menu, and validate your c...
- 4 Press the or buttons to adjust the settings, then press the Menu button to exit the sub-menu.
- 5 Press the Menu button to exit the respective sub-menus, and press the Menu button to exit the OSD.
- Making Adjustments
- NOTE Before exiting the OSD, you are prompted to save your settings.
- The Sub-Menus
- Luminance
- 1 Press the Menu button and use the or buttons to highlight the Luminance icon.
- 2 Press the button to select the feature.
- 3 Use the or buttons to choose either Contrast or Brightness, then press to select it.
- 4 Press or buttons to adjust the settings (the settings are automatically saved).
- 5 Press the Menu button to exit the sub-menu, then press the Menu button to exit the respective s...
- 6 Press the Menu button to exit the OSD.
- Geometry
- 1 Press the Menu button and use the or buttons to highlight the Geometry icon.
- 2 Press the button to select the feature.
- 3 Use the or buttons to choose one of the menu items listed above, then press the button to selec...
- 4 Press or buttons to adjust the settings (the settings are automatically saved).
- 5 Press the Menu button to exit the sub-menu, then press the Menu button to exit the respective s...
- 6 Press the Menu button to exit the OSD.
- Auto Adjustment
- Luminance
- The Sub-Menus
- NOTE For optimum results, it is recommended that you display the pattern provided on the CD-ROM s...
- Color Adjustment
- C1
- C2
- C3
- 9300k
- 6500k
- 5800k
- 1 Press the Menu button and use the or buttons to highlight the Color icon.
- 2 Use the or to choose one of the options listed above.
- 3 To validate your choice, use the Menu button to exit the sub- menus until you are prompted to s...
- 4 To make changes in User Mode, use the or buttons to highlight the User Mode icon then press the...
- 5 Use the or buttons to choose R, G or B (Red, Green or Blue), then press the button to enter the...
- 6 Use the or buttons to make the required adjustments (the settings are automatically saved).
- Audio
- 1 Press the Menu button and then use the or buttons to locate the Volume sub-menu, then press the...
- 2 Press the button to choose the required menu item.
- 3 Use the or buttons to adjust the setting (the settings are automatically saved).
- 4 Press the Menu button to exit the sub-menu, then press the Menu button to exit the respective s...
- 5 Press the Menu button to exit the OSD.
- Miscellaneous
- • Screen Geometry
- • Horizontal Frequency
- • Vertical Frequency
- • Brightness / Contrast
- WARNING By pressing the button all previous adjustments are lost (refer to “Adjusting Your Monito...
- Troubleshooting
- Technical Specifications
- Care and Cleaning
- Environmental Information
- Regulatory Information
- Notice
Related Models for HP Monitors Pavilion fx50 15 inch Flat Panel Monitor
- HP 1910m 18.5 inch Diagonal LCD Monitor
- HP 2009m 20-inch Diagonal HD Ready LCD Monitor
- HP 2010f 20-inch Diagonal LCD Monitor
- HP 2010i 20-inch Diagonal LCD Monitor
- HP 2011x 20 inch Diagonal LED Monitor
- HP 2011x 20-inch LED Backlit LCD Monitor
- HP 2011xi 20-inch Diagonal IPS LED Backlit Monitor
- HP 2159m 21.5-inch Diagonal Full HD LCD Monitor
- HP 2210m 21.5-inch Diagonal LCD Monitor
HP Popular Categories
Headphones
Cameras
Televisions
Air Conditioners
Mobile Phones
Desktops
Laptops
Projectors
Servers
Tablets
Calculators
Printers
Accessories
Lawn Mowers
GPS
Refrigerators
Ovens
Modems
Adapters
Vacuum Cleaners
Musical Instruments
Storage
Fans
Stud Sensor
Monitors
Bicycles
Cooktop
Saw
Fax Machine
Telephone
Routers
Speakers
Desktop PCs
More HP Manuals