Dell OptiPlex 990 (Early 2011) Desktop Manuals
Dell Desktops OptiPlex 990 (Early 2011) Desktop manuals download on ManualAgent: Service Manual
-
Document Outline
- Contents
- Notes, Cautions, and Warnings
- Working on Your Computer
- Cover
- Front Bezel
- Cards
- Optical Drive
- Hard Drive
- Memory
- Chassis Intrusion Switch
- Speaker
- Heat Sink
- Coin-Cell Battery
- Power-Switch Cable
- Front Thermal Sensor
- Chassis Fan
- Input/Output Panel
- Power Supply
- System Board
- Power Supply Unit (PSU) Thermal Sensor
- System Setup
- Troubleshooting
- Diagnostic LEDs
- Beep Codes
- Error Messages
- Address mark not found
- Alert! Previous attempts at booting this system have failed at checkpoint [nnnn]. For help in resolving this problem, please note this checkpoint and contact Dell Technical Support.
- Alert! Security override Jumper is installed.
- Attachment failed to respond
- Bad command or file name
- Bad error-correction code (ECC) on disk read
- Controller has failed
- Data error
- Decreasing available memory
- Diskette drive 0 seek failure
- Diskette read failure
- Diskette subsystem reset failed
- Gate A20 failure
- General failure
- Hard-disk drive configuration error
- Hard-disk drive controller failure
- Hard-disk drive failure
- Hard-disk drive read failure
- Invalid configuration information-please run SETUP program
- Invalid Memory configuration, please populate DIMM1
- Keyboard failure
- Memory address line failure at address, read value expecting value
- Memory allocation error
- Memory data line failure at address, read value expecting value
- Memory double word logic failure at address, read value expecting value
- Memory odd/even logic failure at address, read value expecting value
- Memory write/read failure at address, read value expecting value
- Memory size in CMOS invalid
- Memory tests terminated by keystroke
- No boot device available
- No boot sector on hard-disk drive
- No timer tick interrupt
- Non-system disk or disk error
- Not a boot diskette
- Plug and play configuration error
- Read fault
- Requested sector not found
- Reset failed
- Sector not found
- Seek error
- Shutdown failure
- Time-of-day clock stopped
- Time-of-day not set-please run the System Setup program
- Timer chip counter 2 failed
- Unexpected interrupt in protected mode
- WARNING: Dell's Disk Monitoring System has detected that drive [0/1] on the [primary/secondary] EIDE controller is operating outside of normal specifications. It is advisable to immediately back up your data and replace your hard drive by calling your support desk or Dell.
- Write fault
- Write fault on selected drive
- X:\ is not accessible. The device is not ready
- Specifications
- Contacting Dell
Related Models for Dell Desktops OptiPlex 990 (Early 2011) Desktop
- Dell 540s - Studio Slim Desktop Pc
- Dell Alienware Area-51 (Late 2009)
- Dell Alienware Area-51 ALX (Late 2009)
- Dell Alienware Aurora (Late 2009)
- Dell Alienware Aurora ALX (Late 2009)
- Dell Alienware Aurora R2 (Early 2010)
- Dell Alienware Aurora R3 (Early 2011)
- Dell Alienware Aurora R4 (Late 2011)
- Dell Alienware X51 (Early 2012)
Dell Popular Categories
Audio
Televisions
Mobile Phones
Desktops
Laptops
Projectors
Servers
Tablets
Printers
Accessories
Modems
Storage
Coffee Makers
Fans
Remote Control
Monitors
Fax Machine
Routers
Speakers
Headsets
More Dell Manuals