Miele G 6365 SCVi Operating and Installation Instructions | Page 43

Miele Dishwasher Operating and Installation Instructions - G 6365 SCVi.
Download
Page  of 92
4.9, 1220 votes
background image

Operation

43

Starting a program
 Start the program by closing the door

within four seconds of the last press

of a button.

The program will begin.
The Optical Interface comes on to show

that a program has been started.

If you do not close the door within

four seconds, the indicator light of

the selected program will flash and

the message Press OK to start will ap‐

pear in the display.
The program cannot be started until

you press the OK button and close

the door within four seconds.

A program should only be canceled

in the first few minutes, if at all. Oth‐

erwise important program stages

could be omitted.

Time display
The estimated duration of the program

selected appears in hours and minutes

in the display before the program be‐

gins. During the program, the time left

until the end of the program is dis‐

played.
Each program stage is indicated by a

symbol:

Pre-wash / Soak

Main wash

Interim rinse

Final rinse

Drying

Finish

The program duration displayed may

vary with the same program. It is influ‐

enced by, among other things, the wa‐

ter temperature at each intake, the re‐

activation process, the type of deter‐

gent, the amount of dishware, and the

amount of soiling.
When a program is selected for the first

time, the display shows an average

time for a cold water intake.
The times shown in the program over‐

view refer to standard test loads and

temperatures.
Each time a program is run, the elec‐

tronic module calculates the program

duration required according to the tem‐

perature of the water taken into the

dishwasher and the amount of dish‐

ware.

0.577470s