Merco Savory RT-2VSHO User's Manual | Page 2

Merco Savory Toaster User's Manual - RT-2VSHO.
Download
Page  of 12
4.1, 1594 votes
background image

 

 

RT-2VSE/VSHO Service Manual 

PARTS REPLACEMENT 

(For models: RT-2VSE & RT2-VSHO) 

 

 

 

 

A – CASE REMOVAL 

1.  Remove reflector tray, toast pan and delivery 

chute. 

2.   Remove the 2 screws along the front trim panel 

and remove. 

3.   Remove left front panel. 

4.   Remove the 4 screws holding control panel to 

unit and careful y pul  panel towards you with al  

wires intact.  Slide control panel towards center 

of unit. 

5.   With hands on each side of case, pul  forward to 

remove. 

 

B – CASE REPLACEMENT 

1.   Slide case over unit making sure tabs on the 

sides and top of case fit into grooves on back of 

unit. 

2.   Careful y replace control panel. 

3.   Replace left front panel and front trim panel. 

4.   Replace reflector tray, toast pan and delivery 

chute. 

 

C – ON/OFF (MAIN POWER) SWITCH 

1.   With control panel removed, remove the 2 

slotted screws holding the ON/OFF switch to the 

control panel. 

2.   Disconnect wires and remove switch. 

3.   Instal  new switch from rear of panel and 

reconnect wires.  (Refer to appropriate wiring 

diagram) 

 

D – CONVEYOR ON/OFF SWITCH 

1.   With the control panel removed, disconnect 

wires to switch noting proper orientation. 

2.   Remove bezel from front of panel and push 

switch through back of panel. 

3.   Insert new switch from back of panel.  NOTE: 

Be sure terminals are in correct position. 

4.   Attach bezel on front of panel and tighten. 

5.   Re-attach wires to switch.  (Refer to appropriate 

wiring diagram.) 

E – INFINITE CONTROL SWITCH 

1.  With control panel removed, remove the infinite 

control knob to gain access to the 2 slotted 

screws that hold the control to the unit.  Remove 

these 2 screws. 

2.  Disconnect wires from infinite switch terminals. 

3.  Instal  new switch from back of panel and reattach 

wires.  (Refer to appropriate wiring diagram). 

 

F – BUN-TOAST SWITCH 

1.  Remove control panel. 

2.  The bun-toast switch is held in place by a spring 

clip on the back of the control panel. Pry this clip 

from the 2 switch tabs and remove. 

3.  Squeeze the spring clip together and push it 

through the front of the control panel. 

4.  Disconnect wires from switch. 

5.  Instal  new switch from front of panel. (NOTE: 

New switch has spring clip already attached.) 

6.  Re-attach wires to switch. (Refer to appropriate 

wiring diagram.) 

 

G – SPEED CONTROL  

1.  With control panel removed, loosen set screws on 

speed control knob and remove. 

2.  Remove retaining nut that holds speed control in 

place and remove from back of panel. 

3.  Disconnect motor lead and on/off lead from speed 

control. 

4.  Reverse this procedure to instal  new assembly. 

(Refer to appropriate wiring diagram.) 

 

!

 
WARNING:  Disconnect unit from power source before attempting any service. 

Related Manuals for Merco Savory RT-2VSHO

0.566600s