Maytag MVWX655DW Installation Guide | Page 2

Maytag Washers Installation Guide - MVWX655DW.
Download
Page  of 16
4.5, 2009 votes
background image

2

Optional tools:

Parts supplied: 
NOTE: 
All parts supplied for installation are in                           

cardboard insert in the top of the washer.

LOCATION REQUIREMENTS
Select proper location for your washer to improve performance 

and minimize noise and possible “washer walk”. Install your 

washer in a basement, laundry room, closet, or recessed area.

42"

(1067 mm)

27"

(686 mm)

271/2"

(699 mm)

Parts needed: (Not supplied with washer)

To order, please refer to toll-free phone numbers on back page  

of your Use and Care Guide.

n

8212656RP  10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)

n

8212641RP   5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack) 

n

8212646RP   4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)

n

8212545RP   5 ft. (1.5 m) Inlet hose, Red and Blue EPDM 

 

(2 pack) 

n

8212487RP   5 ft. (1.5 m) Nylon braided inlet hose (2 pack)

n

8212638RP   6 ft. (1.8 m) Nylon braided inlet hose, space

   

saving 90° elbow, hypro-blue steel couplings 

 

(2 pack)

n

8212637RP   6 ft. (1.8 m) Inlet hose, Black EPDM, space 

 

saving 90° elbow, hypro-blue steel couplings 

 

(2 pack)

Alternate parts: (Not supplied with washer)
Your installation may require additional parts. To order, please 

refer to toll-free numbers on back page of your Use and Care 

Guide.

If you have: 

You will need:

Overhead sewer 

Standard 20 gal. (76 L) 39" (990 mm)  

 

tall drain tub or utility sink, sump  

 

pump and connectors (available from  

 

local plumbing suppliers)

1" (25 mm) standpipe 

2" (51 mm) diameter to 1" (25 mm)  

 

diameter Standpipe Adapter  

 

Part Number  3363920 

 

Connector Kit Part Number 285835

Drain hose too short 

Extension Drain Hose Part  

 

Number 285863 

 

Connector Kit Part Number 285835

Lint clogged drain 

Drain Protector Part Number 367031 

 

Connector Kit Part Number 285835

INSTALLATION REQUIREMENTS
Tools and Parts 

Gather required tools and parts before starting installation.

4" min

(102 mm)

Wood block

Adjustable or open end 

wrench 9/16" (14 mm) 

Ruler or measuring tape

Level

Inlet hoses with 

flat washers 

Pliers that open to  

13⁄4" (44.5 mm)

Flashlight

Bucket

Drain hose with clamp, 

U-form, and cable tie

Tools needed:

0.590690s