Maytag MLI7500AAW User's Manual | Page 8

Maytag Iron User's Manual - MLI7500AAW.
Download
Page  of 44
4.3, 1611 votes
background image

7

HEATING THE IRON

1. After setting the temperature, allow

the iron to preheat on the cradle.  The
iron will be ready for use once the
ready light illuminates, approximately
1 - 2 minutes.

• If the temperature setting is changed

from high to low during iron operation,
the ready light will turn off and the
temperature indicator light will begin
flashing. The iron will be ready for use
once the ready light again illuminates
and the temperature indicator light
stops flashing.

• When the iron is removed from the

cradle, the temperature indicator
light will turn off.

Example:

When “linen/cotton” has

been selected

2. Be sure that the iron is always placed

back on the cradle whenever you take
a break from ironing or when you
adjust clothes on the ironing board.

• The ready light will begin to flash

whenever the temperature of the iron
starts to decrease. If the temperature
continues to decrease, the light will
eventually turn off.  When this occurs,
place the iron back on the cradle for
reheating.

• The iron will be ready to use once the

ready light illuminates.

• The most efficient ironing

performance will be obtained when
the iron is reheated briefly each
time the iron is placed on the cradle
while adjusting a garment during
normal ironing.

• When returning the iron to its cradle,

never place it in a sideways or
backwards position. The contact points
will become deformed and the iron will
not be able to heat properly.

• Steam may occasionally continue to

discharge for a short time after the iron
has been placed back on the cradle.
This is normal.

Place 

correctly

Cuff Press
When used as a “dry” iron, the removal of
the water tank allows the iron to be used for
pressing hard to reach
areas such as sleeves,
cuffs and childrens clothes.

0.507628s