Maytag MGD8100DW Installation Guide | Page 14

Maytag Dryer Installation Guide - MGD8100DW.
Download
Page  of 44
4.8, 2316 votes
background image

14

2. Adjust leveling legs

If dryer is not level, prop up using a wood block, use wrench  

to adjust legs up or down, and check again for levelness. 

Once dryer is level, make sure all four legs are snug against 

the floor and the dryer does not rock.

LEVEL DRYER

1. Level dryer

Place 

level here

       Not Level 

            

LEVEL                    Not Level

Check levelness of dryer from  

side to side. Repeat from front to back. 

NOTE: The dryer must be level for the moisture sensing system 

to operate correctly

CONNECT VENT

1. Connect vent to exhaust outlet

2. Move dryer to final location

Using a 4" (102 mm) clamp, connect vent to exhaust outlet  

in dryer. If connecting to existing vent, make sure vent is 

clean. Dryer vent must fit over dryer exhaust outlet and inside 

exhaust hood. Check that vent is secured to exhaust hood 

with a 4" (102 mm) clamp.

Move dryer to final location, taking care not to crush or  

kink vent or flexible gas line.

After dryer is in place, remove corner posts and cardboard 

from under dryer.

0.671194s