Maytag MER8700DS Installation Guide | Page 6
6
INSTALLATION INSTRUCTIONS
Unpack Range
1. Remove shipping materials, tape and film from range.
2. Remove oven racks and parts package from inside oven.
3. Do not remove the shipping base at this time.
4. On Ranges Equipped with a Storage Drawer:
Remove the storage drawer. See the “Storage Drawer”
section. Use a ¼" drive ratchet to lower the rear leveling legs
one-half turn. Use a wrench or pliers to lower front leveling
legs one-half turn.
On Ranges Equipped with a Warming Drawer or Premium
Storage Drawer:
On ranges equipped with a warming drawer or premium
storage drawer, the rear legs cannot be accessed by
removing the warming drawer or premium storage drawer. It
will be necessary to adjust the rear legs from outside the
range. Use wrench or pliers to lower the front and rear
leveling legs one-half turn.
Install Anti-Tip Bracket
1. Remove the anti-tip bracket from where it is taped inside the
storage drawer or warming drawer.
2. Determine which mounting method to use: floor or wall.
If you have a stone or masonry floor, you can use the wall
mounting method. If you are installing the range in a mobile
home, you must secure the range to the floor.
3. Determine and mark centerline of the cutout space. The
mounting can be installed on either the left side or right side
of the cutout. Position mounting bracket against the wall in
the cutout so that the V-notch of the bracket is 12
⁹⁄₁₆"
(31.9 cm) from centerline as shown.
4. Drill two
¹⁄₈" (3 mm) holes that correspond to the bracket
holes of the determined mounting method. See the following
illustrations.
A. Shipping base
A. ¼" drive ratchet
B. Rear leveling leg
C. Wrench or pliers
D. Front leveling leg
A. Rear leveling leg
B. Wrench or pliers
C. Front leveling leg
WARNING
Excessive Weight Hazard
Use two or more people to move and install range.
Failure to do so can result in back or other injury.
A
C
D
A
B
B
C
A
A. 12
⁹⁄₁₆" (31.9 cm)
B. Bracket V-notch
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation
instructions.
Slide range back so rear range foot is engaged in the
slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed
and engaged.
Failure to follow these instructions can result in death
or serious burns to children and adults.
Centerline
B
A
Also See for Maytag MER8700DS
Related Manuals for Maytag MER8700DS
-
Bosch Range Gas Ranges User's Manual
48 pages
-
Samsung Range DG68-00297A User's Manual
46 pages
-
Samsung Range FCQ321HTUX User's Manual
92 pages
-
Samsung Range NE595R0ABSR User's Manual
60 pages
-
Whirlpool Range W10403811C User's Manual
16 pages
-
Hotpoint Range fdl570 User's Manual
20 pages
-
Kenmore Range ELITE 790.467 User's Manual
44 pages
-
Radio Shack Range PRO-2018 User's Manual
36 pages
-
Rockford Fosgate Range RFD1212 User's Manual
16 pages
-
Rockford Fosgate Range RFR2212 User's Manual
16 pages
-
Coleman Range DUAL STOVE 414 User's Manual
20 pages
-
Coleman Range DUAL STOVE 424 User's Manual
20 pages
-
DEFY Range Gas HOB DHG 121 User's Manual
16 pages
-
Dacor Range rsd30 User's Manual
8 pages
-
Kenmore Range Kenmore Elite 40'' Double-Oven Dual-Fuel Range w/Convection Specifications
2 pages
-
Kenmore Range Kenmore Elite 5.4 cu. ft. Double-Oven Electric Range - Stainless Steel Specifications
2 pages
-
Maytag Range MER8700DS Use & Care Manual
20 pages
-
Maytag Range MET8720DS Use & Care Manual
44 pages
-
Maytag Range MGR8700DS Use & Care Manual
40 pages
-
Maytag Range MGT8720DS Installation Guide
40 pages
-
Amana Range AGR4230BAW Use & Care Manual
16 pages
-
Amana Range AGR5330BAS Use & Care Manual
16 pages
-
Miele Range HR 1134 Installation Manual
96 pages
-
Miele Range HR 1934 DF Operating and Installation Instructions
140 pages