Maytag MEDX6STBW Use & Care Manual | Page 10

Maytag Dryer Use & Care Manual - MEDX6STBW.
Download
Page  of 28
4.2, 2308 votes
background image

10

Non-use, Storage, and Moving Care

Non-Use or Storage Care
Operate your dryer only when you are at home. If you will be on 

vacation or not using your dryer for an extended period of time, 

you should:

1.  Unplug dryer or disconnect power.
2.  (For gas dryers only): Close shut-off valve to gas  

supply line.

3.  Clean lint screen. See “Cleaning the Lint Screen.”
4.  Turn off the water supply to the dryer. This helps to avoid 

unintended flooding (due to a water pressure surge) while 

you are away.

Moving Care
For power supply cord-connected dryers:

1.  Unplug the power supply cord.
2.  Gas models only: Close shutoff valve in gas supply line.
3.  Gas models only: Disconnect gas supply line pipe and 

remove fittings attached to dryer pipe.

4.  Gas models only: Cap the open gas supply line.
5.  Steam models only: Shut off water faucet.
6.  Steam models only: Disconnect the water inlet hose from 

faucet, then drain the hose. Transport hose separately.

7.  Make sure leveling legs are secure in dryer base.
8.  Use tape to secure dryer door.

For direct-wired dryers:

1.  Turn off power at fuse or breaker box.
2.  Disconnect wiring.
3.  Steam models only: Shut off water faucet.
4.  Steam models only: Disconnect the water inlet hose from 

faucet, then drain the hose. Transport hose separately.

5.  Make sure leveling legs are secure in dryer base.
6.  Use tape to secure dryer door.

Reinstalling the Dryer
Follow the “Installation Instructions” to locate, level, and  

connect the dryer.

Changing the drum light 

(on some models)

1.  Unplug dryer or disconnect power.
2.  Open the dryer door. Locate the light bulb cover on the 

back wall of the dryer. Using a Phillips-head screwdriver, 

remove the screw located in the lower right-hand corner of 

the cover. Remove the cover.

3.  Turn bulb counterclockwise. Replace the bulb with  

a 10-watt appliance bulb only. Replace the cover and 

secure with the screw.

4.  Plug into a grounded outlet or reconnect power.

Special instructions for steam models

Water Inlet Hose
Replace inlet hose and hose screen after 5 years of use to 

reduce the risk of hose failure. Periodically inspect and replace 

inlet hose if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hose, record the date of replacement.
To Winterize the Dryer
1.
  Unplug dryer or disconnect power.
2.  Shut off water faucet.
3.  Disconnect water inlet hose from faucet and drain.
To Use the Dryer Again
1.
  Flush water pipes. Reconnect water inlet hose to faucet.  

  Turn on water faucet.
2.  Plug in dryer or reconnect power as described in the  

“Installation Instructions”.

0.578706s