Logitech VN-2000 User's Manual

Logitech Microcassette Recorder User's Manual - VN-2000.
Download
Page  of 2
4.7, 2154 votes
background image

2005.4.15  BZ8117T4  INST EN  1

1 Press the FOLDER button to

select the desired folder (A,
B, C or S).
When you select folder S, the
current date subfolder appears
on the display.
• If you select folder S, press the

+ or – button to select the desired
date subfolder.

2 Press the REC button to

start recording.
The Recording/playing lamp
turns red, and recording starts.

3 To stop recording, press the

STOP button.
New recordings are saved as
the last file in the folder.

To Pause Recording

To pause

Press the REC button during recording.

, “PAUSE” appears on the display and the Recording/playing

lamp flashes.

To resume recording

Press the REC button again.

, Recording will resume at the point of interruption.

DIGITAL VOICE RECORDER

VN-1000
VN-2000

EN

  INSTRUCTIONS

Thank you for purchasing an Olympus

Digital Voice Recorder.

Please read these instructions for information

about using the product correctly and safely.

Keep the instructions handy for future reference.

To ensure successful recordings, we recommend that

you test the record function and volume before use.

U1-BZ8117-01

AP0504

Identification of Parts

1 Lightly press down on the arrow and slide the

battery cover open.

2 Insert two size-AAA alkaline batteries, observing

the correct polarity.

3 Close the battery cover completely.

Time/Date screen appears. The hour indicator
flashes, indicating the start of the Time/Date setup
process. (See “Setting Time/Date” for details)

Replacing Batteries
When 

 appears on the display, replace the batteries as soon as possible. Size-AAA

alkaline batteries are recommended. When the batteries are depleted, 

 appears on the

display, and the recorder shuts off. It is recommended to set the HOLD switch to the HOLD
position before you replace batteries to maintain the current settings (time/date, etc.). For
your convenience,the recorder also logs the current settings in nonvolatile memory at hourly
intervals.

Standby Mode and Display Shut Off
If the recorder is stopped or paused for 5 minutes or longer during recording or playing, it
goes into Standby (power-save) mode, and the display shuts off. To exit Standby mode and
turn on the display, press any button.

Inserting Batteries

Setting Time/Date (TIME)

If you have set the time and date, information as to when a sound file was recorded is stored
automatically with that file.
The time and date must be set to enable management of files in folder S, for the alarm
playback function, and for the timer recording.

When you install batteries for the first time or each time you replace the batteries, the
hour indication will flash. In such a case, be sure to set the time and date by following
steps 5 through 9 described below.

Notes on the Folders

The recorder has four folders: A, B, C, and S.
To change the folder selection, press the FOLDER button while
the recorder is stopped.

• Folders A, B, and C

Each recorded file is stored in a folder. Using folders to classify files
makes it convenient to find files you want to access later.

• Folder S

This folder has date subfolders* from January 1 to December 31. Up to 10 files can be
stored in each date subfolder, a useful feature for schedule management by storing a
certain day's schedule for future reference.
To switch between date subfolders, select the S folder, then press the  + or  – button while
the recorder is stopped. Up to a total of 100 files can be recorded in folder S.
* There is one subfolder for each day of the year.

Current folder

a

Hold

Set the HOLD switch to the HOLD position.
All operation buttons are disabled. This feature is useful when
the recorder has to be carried in a handbag or pocket.
Remember to reset the HOLD switch before attempting
to use the recorder.

Notes
• The alarm will sound at the scheduled time even if the recorder is

set to HOLD. The recorder will then begin to play the file associated
with the alarm once you press any button.

• The recorder functions as follows with the HOLD switch set to the

HOLD position:
– If the recorder is playing, the display goes dark when playback of

the current file has completed.

– When you set the HOLD switch to the HOLD position while playing

back, you can still adjust the volume using the VOLUME control.

– If the recorder is recording, the display goes dark when the

recorder stops recording automatically upon running out of free
memory.

• Press the area that the arrow points to.
• Do not force the clip wider, as it may break.

How to Use the Clip

Clip

Current recording

mode

Current file

number

Recording time

Remaining

recording time
(REMAIN)

3

2

1

a

d

e

c

b

f

Current folder

Date to record

Getting Started

An optional Ni-MH Rechargeable Battery from
Olympus can be used for the recorder.

4

2
3
1

1 Press the FOLDER button to

select the desired folder (A,
B, C or S).

2 Press the + or – button to

select the file to play back.
If you select folder S, select
the desired date subfolder.
• When you select the desired date

subfolder, it is useful to press and
hold the + or – button for 1
second or longer. The recorder
locates the next date subfolder
that contains recorded files.

3 Press the PLAY button to

start playback.
The Recording/playing lamp
turns green, and the elapsed
playing time is indicated on the
display.

4 Use the VOLUME control to

adjust the volume to your
liking.

b

c

a

Current folder
Current file

number

Playing time

Maximum of 100 files in folder S.

Maximum of 100 files

Folder B

Folder A

File

Date subfolder

File

Folder C

Maximum of 100 files in each folder
Total of 300 files.

Maximum

of 10 files

– 1 –

– 2 –

– 3 –

– 4 –

– 5 –

1,8

3,5,7

2,4,6

• You can switch the time indication between the 12-hour system and the 24-hour system by

pressing the DISPLAY button while you are setting the hour or minute.

• You can change the order of the date indication by pressing the DISPLAY button while you

are setting the year, month, or day.
(Example:  February 14, 2005)

1 Press and hold the MENU button for

1 second or longer.

2 Press the STOP or PLAY button until

“TIME” flashes on the display.

3 Press the ENTER button.

The hour indicator flashes.

4 Press the STOP or PLAY button to set

the hour.

5 Press the ENTER button to accept the

minute.
The minute indicator flashes.
Pressing the – button enables the hour
setting again.

6 Press the STOP or PLAY button to set

the minute.
Repeat steps 5 and 6 to continue to set
the year, month and date in the same way.

7 After setting the date, press the ENTER

button.
This completes the time/date setup
procedure.

8 Press the MENU button.

Recording

Playing Back

LCD Display Information

You can select an option for the display of the recorder. This help review and confirm different
recorder settings and file information.

Canceling Playback

To stop

Press the STOP button.

, The recorder stops in the middle of the file being played.

To resume playback

Press the PLAY button again.

, Playback will resume at the point of interruption.

When you play back a file in the date subfolder without choosing a specified file, the
recorder will play back all the files in the selected date subfolder from filename “01”.
When you play back a file immediately after recording the file, only the most recently
recorded file will be played back.

Forwarding and Rewinding

Fast Forward

Press and hold the 9 button while playing a file.
, When you release the 9 button, the recorder will resume normal playback.

Rewind

Press and hold the 0 button while playing a file.
, When you release the 0 button, the recorder will resume normal playback.

• No sound is heard from the built-in speaker during fast forwarding or rewinding.
• The end of the file is located by pressing and holding the 9 button during fast

forwarding. The recorder will pause at the end of the file. If you do not release the
9 button, the recorder will continue fast forward.

• The beginning of the file is located by pressing and holding the 0 button during

rewinding. The recorder will pause at the beginning of the file. If you do not release
the 0 button, the recorder will continue rewinding.

Changing Playing Speed
You can change the playing speed by pressing the PLAY button while the recorder is
playing back.

• When the slow playback mode is selected, the “SLOW” appears and, for the fast

playback mode, “FAST” appears on the display while the recorder is playing back.

• The recorder stops playing when you press the STOP button while playing back in

the slow/fast mode, or when it reaches to the end of the file. If you once press the
STOP button and start playback again, the recorder will play back files in normal
speed as well.

Locating the beginning of the file
While the recorder is playing back in the slow/fast mode, pressing the + or  button
forwards or rewinds to the beginning of the previous or next file respectively.  If an
index mark is encountered midway, playback begins at that point. (See “Index Marks”
for details)

Listening with earphones
You can listen to files by connecting earphones to the earphone jack.
If an earphone is connected, the speaker doesn't emit sound. Sound will be played
back monaurally.

* You can use any standard 3.5mm monaural earphone or headphone.

Normal speed               Slow playback

           Fast playback

     ( -20%)

                    (+30%)

Notes

• If “FULL” appears on the display, you cannot record in the selected folder. In

such a case, erase unnecessary files.

• If the recorder is placed directly on a table when recording a meeting, it tends to

pick up table vibrations. Put a notebook or other item between the table and the
recorder for clearer recording.

• Even if you press the DISPLAY button, the display will not change to current

recording time if the remaining recording time is 5 minutes or less.

• When remaining recording time falls to 1 minute or less, the Recording/playing

lamp flashes red.

• The recorder will enter stop mode if it has been left paused for 10 minutes or

longer.

• In case of difficult acoustic conditions or low speaker’s voice, recording in HQ or

SP is recommended.  Also, usage of an external microphone (sold separately)
could improve the quality of recordings.

MAX

MIN

Microphone jack

Clip

Display (LCD panel)

Recording/playing lamp

DISPLAY button

STOP button

0 (Rewind) button/ – button

PLAY button

ERASE button

MENU button/

FOLDER button

Microphone

Earphone jack

Built-in speaker
REC (Record) button

ENTER button/INDEX button

VOLUME control

9 (Fast Forward) button/ + button

Battery cover

Folder S (schedule)

State of the

recorder

While in 

stop

mode

While in record
mode

While in
playback mode

Operation

Press and hold
the STOP button

Press the
DISPLAY button

Press the
DISPLAY button

Press the
DISPLAY button

Display

The total number of files recorded in the folder
and remaining recording time appears on the
display.

Time 

→ Remaining recording time → Date →

Time . . . (with folder A, B or C selected)
The selected indication appears on the display
each time the recorder is stopped.

The display switches between current recording
time and remaining recording time.

Playing time 

→ Remaining playing time →

Recording date of the file 

→ Recording time of

the file 

→ Playing time . . .

Related Manuals for Logitech VN-2000

0.535750s